Message ID | 20210924133624.112593-1-krzysztof.kozlowski@canonical.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | clk: samsung: describe drivers in KConfig | expand |
On 21. 9. 24. 오후 10:36, Krzysztof Kozlowski wrote: > Describe better which driver applies to which SoC, to make configuring > kernel for Samsung SoC easier. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> > --- > drivers/clk/samsung/Kconfig | 30 ++++++++++++++++++++---------- > 1 file changed, 20 insertions(+), 10 deletions(-) > > diff --git a/drivers/clk/samsung/Kconfig b/drivers/clk/samsung/Kconfig > index 0441c4f73ac9..0e18d6ff2916 100644 > --- a/drivers/clk/samsung/Kconfig > +++ b/drivers/clk/samsung/Kconfig > @@ -67,7 +67,8 @@ config EXYNOS_5420_COMMON_CLK > depends on COMMON_CLK_SAMSUNG > help > Support for the clock controller present on the Samsung > - Exynos5420 SoCs. Choose Y here only if you build for this SoC. > + Exynos5420/Exynos5422/Exynos5800 SoCs. Choose Y here only if you > + build for this SoC. > > config EXYNOS_ARM64_COMMON_CLK > bool "Samsung Exynos ARMv8-family clock controller support" if COMPILE_TEST > @@ -79,38 +80,47 @@ config EXYNOS_AUDSS_CLK_CON > default y if ARCH_EXYNOS > help > Support for the Audio Subsystem CLKCON clock controller present > - on some Exynos SoC variants. Choose M or Y here if you want to > - use audio devices such as I2S, PCM, etc. > + on some Samsung Exynos SoC variants. Choose M or Y here if you want > + to use audio devices such as I2S, PCM, etc. > > config EXYNOS_CLKOUT > tristate "Samsung Exynos clock output driver" > depends on COMMON_CLK_SAMSUNG > default y if ARCH_EXYNOS > help > - Support for the clock output (XCLKOUT) present on some of Exynos SoC > - variants. Usually the XCLKOUT is used to monitor the status of the > - certains clocks from SoC, but it could also be tied to other devices > - as an input clock. > + Support for the clock output (XCLKOUT) present on some of Samsung > + Exynos SoC variants. Usually the XCLKOUT is used to monitor the > + status of the certains clocks from SoC, but it could also be tied to > + other devices as an input clock. > > # For S3C24XX platforms, select following symbols: > config S3C2410_COMMON_CLK > bool "Samsung S3C2410 clock controller support" if COMPILE_TEST > select COMMON_CLK_SAMSUNG > help > - Build the s3c2410 clock driver based on the common clock framework. > + Support for the clock controller present on the Samsung > + S3C2410/S3C2440/S3C2442 SoCs. Choose Y here only if you build for > + this SoC. > > config S3C2410_COMMON_DCLK > bool > select COMMON_CLK_SAMSUNG > select REGMAP_MMIO > help > - Temporary symbol to build the dclk driver based on the common clock > - framework. > + Support for the dclk clock controller present on the Samsung > + S3C2410/S3C2412/S3C2440/S3C2443 SoCs. Choose Y here only if you build > + for this SoC. > > config S3C2412_COMMON_CLK > bool "Samsung S3C2412 clock controller support" if COMPILE_TEST > select COMMON_CLK_SAMSUNG > + help > + Support for the clock controller present on the Samsung S3C2412 SoCs. > + Choose Y here only if you build for this SoC. > > config S3C2443_COMMON_CLK > bool "Samsung S3C2443 clock controller support" if COMPILE_TEST > select COMMON_CLK_SAMSUNG > + help > + Support for the clock controller present on the Samsung > + S3C2416/S3C2443 SoCs. Choose Y here only if you build for this SoC. > Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
On 24.09.2021 15:36, Krzysztof Kozlowski wrote: > Describe better which driver applies to which SoC, to make configuring > kernel for Samsung SoC easier. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Applied, thanks.
diff --git a/drivers/clk/samsung/Kconfig b/drivers/clk/samsung/Kconfig index 0441c4f73ac9..0e18d6ff2916 100644 --- a/drivers/clk/samsung/Kconfig +++ b/drivers/clk/samsung/Kconfig @@ -67,7 +67,8 @@ config EXYNOS_5420_COMMON_CLK depends on COMMON_CLK_SAMSUNG help Support for the clock controller present on the Samsung - Exynos5420 SoCs. Choose Y here only if you build for this SoC. + Exynos5420/Exynos5422/Exynos5800 SoCs. Choose Y here only if you + build for this SoC. config EXYNOS_ARM64_COMMON_CLK bool "Samsung Exynos ARMv8-family clock controller support" if COMPILE_TEST @@ -79,38 +80,47 @@ config EXYNOS_AUDSS_CLK_CON default y if ARCH_EXYNOS help Support for the Audio Subsystem CLKCON clock controller present - on some Exynos SoC variants. Choose M or Y here if you want to - use audio devices such as I2S, PCM, etc. + on some Samsung Exynos SoC variants. Choose M or Y here if you want + to use audio devices such as I2S, PCM, etc. config EXYNOS_CLKOUT tristate "Samsung Exynos clock output driver" depends on COMMON_CLK_SAMSUNG default y if ARCH_EXYNOS help - Support for the clock output (XCLKOUT) present on some of Exynos SoC - variants. Usually the XCLKOUT is used to monitor the status of the - certains clocks from SoC, but it could also be tied to other devices - as an input clock. + Support for the clock output (XCLKOUT) present on some of Samsung + Exynos SoC variants. Usually the XCLKOUT is used to monitor the + status of the certains clocks from SoC, but it could also be tied to + other devices as an input clock. # For S3C24XX platforms, select following symbols: config S3C2410_COMMON_CLK bool "Samsung S3C2410 clock controller support" if COMPILE_TEST select COMMON_CLK_SAMSUNG help - Build the s3c2410 clock driver based on the common clock framework. + Support for the clock controller present on the Samsung + S3C2410/S3C2440/S3C2442 SoCs. Choose Y here only if you build for + this SoC. config S3C2410_COMMON_DCLK bool select COMMON_CLK_SAMSUNG select REGMAP_MMIO help - Temporary symbol to build the dclk driver based on the common clock - framework. + Support for the dclk clock controller present on the Samsung + S3C2410/S3C2412/S3C2440/S3C2443 SoCs. Choose Y here only if you build + for this SoC. config S3C2412_COMMON_CLK bool "Samsung S3C2412 clock controller support" if COMPILE_TEST select COMMON_CLK_SAMSUNG + help + Support for the clock controller present on the Samsung S3C2412 SoCs. + Choose Y here only if you build for this SoC. config S3C2443_COMMON_CLK bool "Samsung S3C2443 clock controller support" if COMPILE_TEST select COMMON_CLK_SAMSUNG + help + Support for the clock controller present on the Samsung + S3C2416/S3C2443 SoCs. Choose Y here only if you build for this SoC.
Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- drivers/clk/samsung/Kconfig | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-)