diff mbox series

[3/8] Revert "mtd: rawnand: txx9ndfmc: Fix external use of SW Hamming ECC helper"

Message ID 20210928221507.199198-4-miquel.raynal@bootlin.com (mailing list archive)
State New, archived
Headers show
Series Cleanup series about Hamming helpers | expand

Commit Message

Miquel Raynal Sept. 28, 2021, 10:15 p.m. UTC
This reverts commit 3d227a0b0ce319edbff6fd0d8af4d66689e477cc.

Before the introduction of the ECC framework infrastructure, many
drivers used the ->calculate/correct() Hamming helpers directly. The
point of this framework was to avoid this kind of hackish calls and use a
proper and generic API but it is true that in certain cases, drivers
still need to use these helpers in order to do ECC computations on
behalf of their limited hardware.

Right after the introduction of the ECC engine core introduction, it was
spotted that it was not possible to use the shiny rawnand software ECC
helpers so easily because an ECC engine object should have been
allocated and initialized first. While this works well in most cases,
for these drivers just leveraging the power of a single helper in
conjunction with some pretty old and limited hardware, it did not fit.

The idea back then was to declare intermediate helpers which would make
use of the exported software ECC engine bare functions while keeping the
rawnand layer compatibility. As there was already functions with the
rawnand_sw_hamming_ prefix it was decided to declare new local helpers
for this purpose in each driver needing one.

Besides being far from optimal, this design choice was blamed by Linus
when he pulled the "fixes" pull request [1] so that is why now it is
time to clean this mess up.

The implementation of the rawnand_ecc_sw_* helpers has now been enhanced
to support both cases, when the ECC object is instantiated and when it is
not. This way, we can still use the existing and exported rawnand
helpers while avoiding the need for each driver to declare its own
helper, thus this fix from [2] can now be safely reverted.

[1] https://lore.kernel.org/lkml/CAHk-=wh_ZHF685Fni8V9is17mj=pFisUaZ_0=gq6nbK+ZcyQmg@mail.gmail.com/
[2] https://lore.kernel.org/linux-mtd/20210413161840.345208-1-miquel.raynal@bootlin.com

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/txx9ndfmc.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

Comments

Miquel Raynal Oct. 15, 2021, 10:33 a.m. UTC | #1
On Tue, 2021-09-28 at 22:15:02 UTC, Miquel Raynal wrote:
> This reverts commit 3d227a0b0ce319edbff6fd0d8af4d66689e477cc.
> 
> Before the introduction of the ECC framework infrastructure, many
> drivers used the ->calculate/correct() Hamming helpers directly. The
> point of this framework was to avoid this kind of hackish calls and use a
> proper and generic API but it is true that in certain cases, drivers
> still need to use these helpers in order to do ECC computations on
> behalf of their limited hardware.
> 
> Right after the introduction of the ECC engine core introduction, it was
> spotted that it was not possible to use the shiny rawnand software ECC
> helpers so easily because an ECC engine object should have been
> allocated and initialized first. While this works well in most cases,
> for these drivers just leveraging the power of a single helper in
> conjunction with some pretty old and limited hardware, it did not fit.
> 
> The idea back then was to declare intermediate helpers which would make
> use of the exported software ECC engine bare functions while keeping the
> rawnand layer compatibility. As there was already functions with the
> rawnand_sw_hamming_ prefix it was decided to declare new local helpers
> for this purpose in each driver needing one.
> 
> Besides being far from optimal, this design choice was blamed by Linus
> when he pulled the "fixes" pull request [1] so that is why now it is
> time to clean this mess up.
> 
> The implementation of the rawnand_ecc_sw_* helpers has now been enhanced
> to support both cases, when the ECC object is instantiated and when it is
> not. This way, we can still use the existing and exported rawnand
> helpers while avoiding the need for each driver to declare its own
> helper, thus this fix from [2] can now be safely reverted.
> 
> [1] https://lore.kernel.org/lkml/CAHk-=wh_ZHF685Fni8V9is17mj=pFisUaZ_0=gq6nbK+ZcyQmg@mail.gmail.com/
> [2] https://lore.kernel.org/linux-mtd/20210413161840.345208-1-miquel.raynal@bootlin.com
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next.

Miquel
diff mbox series

Patch

diff --git a/drivers/mtd/nand/raw/txx9ndfmc.c b/drivers/mtd/nand/raw/txx9ndfmc.c
index b8894ac27073..1a9449e53bf9 100644
--- a/drivers/mtd/nand/raw/txx9ndfmc.c
+++ b/drivers/mtd/nand/raw/txx9ndfmc.c
@@ -13,7 +13,6 @@ 
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
@@ -194,8 +193,8 @@  static int txx9ndfmc_correct_data(struct nand_chip *chip, unsigned char *buf,
 	int stat;
 
 	for (eccsize = chip->ecc.size; eccsize > 0; eccsize -= 256) {
-		stat = ecc_sw_hamming_correct(buf, read_ecc, calc_ecc,
-					      chip->ecc.size, false);
+		stat = rawnand_sw_hamming_correct(chip, buf, read_ecc,
+						  calc_ecc);
 		if (stat < 0)
 			return stat;
 		corrected += stat;