[v5,07/18] soc: imx: gpcv2: support system suspend/resume

Commit Message

Lucas Stach Oct. 2, 2021, 12:59 a.m. UTC

Our usage of runtime PM to control the hierarchy of power domains is
slightly unusual and means that powering up a domain may fail in early
system resume, as runtime PM is still disallowed at this stage.

However the system suspend/resume path takes care of powering down/up
the power domains in the order defined by the device parent/child and
power-domain provider/consumer hierarachy. So we can just runtime
resume all our power-domain devices to allow the power-up to work
properly in the resume path. System suspend will still disable all
domains as intended.

Signed-off-by: Lucas Stach <[e-mail]>
Acked-by: Peng Fan <[e-mail]>
---
 drivers/soc/imx/gpcv2.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

Patch

diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index adf297c2d2af..811e9d29a079 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -948,6 +948,36 @@  static int imx_pgc_domain_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int imx_pgc_domain_suspend(struct device *dev)
+{
+	int ret;
+
+	/*
+	 * This may look strange, but is done so the generic PM_SLEEP code
+	 * can power down our domain and more importantly power it up again
+	 * after resume, without tripping over our usage of runtime PM to
+	 * power up/down the nested domains.
+	 */
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(dev);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int imx_pgc_domain_resume(struct device *dev)
+{
+	return pm_runtime_put(dev);
+}
+#endif
+
+static const struct dev_pm_ops imx_pgc_domain_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(imx_pgc_domain_suspend, imx_pgc_domain_resume)
+};
+
 static const struct platform_device_id imx_pgc_domain_id[] = {
 	{ "imx-pgc-domain", },
 	{ },
@@ -956,6 +986,7 @@  static const struct platform_device_id imx_pgc_domain_id[] = {
 static struct platform_driver imx_pgc_domain_driver = {
 	.driver = {
 		.name = "imx-pgc",
+		.pm = &imx_pgc_domain_pm_ops,
 	},
 	.probe    = imx_pgc_domain_probe,
 	.remove   = imx_pgc_domain_remove,