diff mbox series

[v2,32/43] KVM: VMX: Move preemption timer <=> hrtimer dance to common x86

Message ID 20211009021236.4122790-33-seanjc@google.com (mailing list archive)
State New, archived
Headers show
Series KVM: Halt-polling and x86 APICv overhaul | expand

Commit Message

Sean Christopherson Oct. 9, 2021, 2:12 a.m. UTC 
Handle the switch to/from the hypervisor/software timer when a vCPU is
blocking in common x86 instead of in VMX.  Even though VMX is the only
user of a hypervisor timer, the logic and all functions involved are
generic x86 (unless future CPUs do something completely different and
implement a hypervisor timer that runs regardless of mode).

Handling the switch in common x86 will allow for the elimination of the
pre/post_blocks hooks, and also lets KVM switch back to the hypervisor
timer if and only if it was in use (without additional params).  Add a
comment explaining why the switch cannot be deferred to kvm_sched_out()
or kvm_vcpu_block().

Signed-off-by: Sean Christopherson <seanjc@google.com>
---
 arch/x86/kvm/vmx/vmx.c |  6 +-----
 arch/x86/kvm/x86.c     | 21 +++++++++++++++++++++
 2 files changed, 22 insertions(+), 5 deletions(-)

Comments

Maxim Levitsky Oct. 28, 2021, 3:45 p.m. UTC | #1 
On Fri, 2021-10-08 at 19:12 -0700, Sean Christopherson wrote:
> Handle the switch to/from the hypervisor/software timer when a vCPU is
> blocking in common x86 instead of in VMX.  Even though VMX is the only
> user of a hypervisor timer, the logic and all functions involved are
> generic x86 (unless future CPUs do something completely different and
> implement a hypervisor timer that runs regardless of mode).
> 
> Handling the switch in common x86 will allow for the elimination of the
> pre/post_blocks hooks, and also lets KVM switch back to the hypervisor
> timer if and only if it was in use (without additional params).  Add a
> comment explaining why the switch cannot be deferred to kvm_sched_out()
> or kvm_vcpu_block().
> 
> Signed-off-by: Sean Christopherson <seanjc@google.com>
> ---
>  arch/x86/kvm/vmx/vmx.c |  6 +-----
>  arch/x86/kvm/x86.c     | 21 +++++++++++++++++++++
>  2 files changed, 22 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index b3bb2031a7ac..a24f19874716 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -7464,16 +7464,12 @@ void vmx_update_cpu_dirty_logging(struct kvm_vcpu *vcpu)
>  
>  static int vmx_pre_block(struct kvm_vcpu *vcpu)
>  {
> -	if (kvm_lapic_hv_timer_in_use(vcpu))
> -		kvm_lapic_switch_to_sw_timer(vcpu);
> -
>  	return 0;
>  }
>  
>  static void vmx_post_block(struct kvm_vcpu *vcpu)
>  {
> -	if (kvm_x86_ops.set_hv_timer)
> -		kvm_lapic_switch_to_hv_timer(vcpu);
> +
>  }
>  
>  static void vmx_setup_mce(struct kvm_vcpu *vcpu)
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index e0219acfd9cf..909e932a7ae7 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -9896,8 +9896,21 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
>  
>  static inline int vcpu_block(struct kvm *kvm, struct kvm_vcpu *vcpu)
>  {
> +	bool hv_timer;
> +
>  	if (!kvm_arch_vcpu_runnable(vcpu) &&
>  	    (!kvm_x86_ops.pre_block || static_call(kvm_x86_pre_block)(vcpu) == 0)) {
> +		/*
> +		 * Switch to the software timer before halt-polling/blocking as
> +		 * the guest's timer may be a break event for the vCPU, and the
> +		 * hypervisor timer runs only when the CPU is in guest mode.
> +		 * Switch before halt-polling so that KVM recognizes an expired
> +		 * timer before blocking.
> +		 */

I didn't knew about this until now but it all makes sense. The comment is very good.

> +		hv_timer = kvm_lapic_hv_timer_in_use(vcpu);
> +		if (hv_timer)
> +			kvm_lapic_switch_to_sw_timer(vcpu);
> +
>  		srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx);
>  		if (vcpu->arch.mp_state == KVM_MP_STATE_HALTED)
>  			kvm_vcpu_halt(vcpu);
> @@ -9905,6 +9918,9 @@ static inline int vcpu_block(struct kvm *kvm, struct kvm_vcpu *vcpu)
>  			kvm_vcpu_block(vcpu);
>  		vcpu->srcu_idx = srcu_read_lock(&kvm->srcu);
>  
> +		if (hv_timer)
> +			kvm_lapic_switch_to_hv_timer(vcpu);
> +
>  		if (kvm_x86_ops.post_block)
>  			static_call(kvm_x86_post_block)(vcpu);
>  
> @@ -10136,6 +10152,11 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
>  			r = -EINTR;
>  			goto out;
>  		}
> +		/*
> +		 * It should be impossible for the hypervisor timer to be in
> +		 * use before KVM has ever run the vCPU.
> +		 */
> +		WARN_ON_ONCE(kvm_lapic_hv_timer_in_use(vcpu));
>  		kvm_vcpu_block(vcpu);
>  		if (kvm_apic_accept_events(vcpu) < 0) {
>  			r = 0;

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>

Best regards,
	Maxim Levitsky
diff mbox series

Patch

diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index b3bb2031a7ac..a24f19874716 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -7464,16 +7464,12 @@  void vmx_update_cpu_dirty_logging(struct kvm_vcpu *vcpu)
 
 static int vmx_pre_block(struct kvm_vcpu *vcpu)
 {
-	if (kvm_lapic_hv_timer_in_use(vcpu))
-		kvm_lapic_switch_to_sw_timer(vcpu);
-
 	return 0;
 }
 
 static void vmx_post_block(struct kvm_vcpu *vcpu)
 {
-	if (kvm_x86_ops.set_hv_timer)
-		kvm_lapic_switch_to_hv_timer(vcpu);
+
 }
 
 static void vmx_setup_mce(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index e0219acfd9cf..909e932a7ae7 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -9896,8 +9896,21 @@  static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 
 static inline int vcpu_block(struct kvm *kvm, struct kvm_vcpu *vcpu)
 {
+	bool hv_timer;
+
 	if (!kvm_arch_vcpu_runnable(vcpu) &&
 	    (!kvm_x86_ops.pre_block || static_call(kvm_x86_pre_block)(vcpu) == 0)) {
+		/*
+		 * Switch to the software timer before halt-polling/blocking as
+		 * the guest's timer may be a break event for the vCPU, and the
+		 * hypervisor timer runs only when the CPU is in guest mode.
+		 * Switch before halt-polling so that KVM recognizes an expired
+		 * timer before blocking.
+		 */
+		hv_timer = kvm_lapic_hv_timer_in_use(vcpu);
+		if (hv_timer)
+			kvm_lapic_switch_to_sw_timer(vcpu);
+
 		srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx);
 		if (vcpu->arch.mp_state == KVM_MP_STATE_HALTED)
 			kvm_vcpu_halt(vcpu);
@@ -9905,6 +9918,9 @@  static inline int vcpu_block(struct kvm *kvm, struct kvm_vcpu *vcpu)
 			kvm_vcpu_block(vcpu);
 		vcpu->srcu_idx = srcu_read_lock(&kvm->srcu);
 
+		if (hv_timer)
+			kvm_lapic_switch_to_hv_timer(vcpu);
+
 		if (kvm_x86_ops.post_block)
 			static_call(kvm_x86_post_block)(vcpu);
 
@@ -10136,6 +10152,11 @@  int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 			r = -EINTR;
 			goto out;
 		}
+		/*
+		 * It should be impossible for the hypervisor timer to be in
+		 * use before KVM has ever run the vCPU.
+		 */
+		WARN_ON_ONCE(kvm_lapic_hv_timer_in_use(vcpu));
 		kvm_vcpu_block(vcpu);
 		if (kvm_apic_accept_events(vcpu) < 0) {
 			r = 0;