@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-rm-mbrc.dtb
+dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-visrobo-vrb.dtb
new file mode 100644
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree File for TMPV7708 VisROBO VRB board
+ *
+ * (C) Copyright 2020, 2021, Toshiba Corporation.
+ * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ */
+
+/dts-v1/;
+
+#include "tmpv7708-visrobo-vrc.dtsi"
+
+/ {
+ model = "Toshiba TMPV7708 VisROBO (VRB) board";
+ compatible = "toshiba,tmpv7708-visrobo-vrb", "toshiba,tmpv7708";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ /* 768MB memory */
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x30000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+ clocks = <&uart_clk>;
+ clock-names = "apb_pclk";
+};
+
+&uart1 {
+ status = "okay";
+ clocks = <&uart_clk>;
+ clock-names = "apb_pclk";
+};
+
+&piether {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ clocks = <&clk300mhz>, <&clk125mhz>;
+ clock-names = "stmmaceth", "phy_ref_clk";
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ reg = <0x1>;
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree File for TMPV7708 VisROBO VRC SoM
+ *
+ * (C) Copyright 2020, 2021, Toshiba Corporation.
+ * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ */
+
+/dts-v1/;
+
+#include "tmpv7708.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+&wdt {
+ status = "okay";
+ clocks = <&wdt_clk>;
+};
+
+&gpio {
+ status = "okay";
+};
+
+&spi0_pins {
+ groups = "spi0_grp", "spi0_cs0_grp";
+};
+
+&spi0 {
+ status = "okay";
+ clocks = <&clk300mhz>, <&clk150mhz>;
+ clock-names = "sspclk", "apb_pclk";
+
+ mmc-slot@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ voltage-ranges = <3200 3400>;
+ spi-max-frequency = <12000000>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ clocks = <&clk150mhz>;
+};
This board consists of two boards: the SoM board (VRC SoM) with the SoC on board, and the board for I/O (VRB). The functions of each board supported by this update are as follows: - VRC SoM - WDT - GPIO - SDCard (SPI-MMC mode) - I2C x1 - VRB board - VRC SoM - UART x2 - Ethernet phy Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp> --- arch/arm64/boot/dts/toshiba/Makefile | 1 + .../boot/dts/toshiba/tmpv7708-visrobo-vrb.dts | 61 +++++++++++++++++++ .../dts/toshiba/tmpv7708-visrobo-vrc.dtsi | 44 +++++++++++++ 3 files changed, 106 insertions(+) create mode 100644 arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts create mode 100644 arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi