diff mbox series

[v2,4/6] drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR

Message ID 20211015141107.2430800-5-narmstrong@baylibre.com (mailing list archive)
State New, archived
Headers show
Series drm/meson: rework encoders to pass ATTACH_NO_CONNECTOR | expand

Commit Message

Neil Armstrong Oct. 15, 2021, 2:11 p.m. UTC 
This implements the necessary change to no more use the embedded
connector in dw-hdmi and use the dedicated bridge connector driver
by passing DRM_BRIDGE_ATTACH_NO_CONNECTOR to the bridge attach call.

The necessary connector properties are added to handle the same
functionalities as the embedded dw-hdmi connector, i.e. the HDR
metadata, the CEC notifier & other flags.

The dw-hdmi output_port is set to 1 in order to look for a connector
next bridge in order to get DRM_BRIDGE_ATTACH_NO_CONNECTOR working.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
---
 drivers/gpu/drm/meson/Kconfig              |  2 +
 drivers/gpu/drm/meson/meson_dw_hdmi.c      |  1 +
 drivers/gpu/drm/meson/meson_encoder_hdmi.c | 81 +++++++++++++++++++++-
 3 files changed, 82 insertions(+), 2 deletions(-)

Comments

Martin Blumenstingl Oct. 15, 2021, 10:07 p.m. UTC | #1 
Hi Neil,

On Fri, Oct 15, 2021 at 4:11 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> This implements the necessary change to no more use the embedded
> connector in dw-hdmi and use the dedicated bridge connector driver
> by passing DRM_BRIDGE_ATTACH_NO_CONNECTOR to the bridge attach call.
>
> The necessary connector properties are added to handle the same
> functionalities as the embedded dw-hdmi connector, i.e. the HDR
> metadata, the CEC notifier & other flags.
>
> The dw-hdmi output_port is set to 1 in order to look for a connector
> next bridge in order to get DRM_BRIDGE_ATTACH_NO_CONNECTOR working.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> Acked-by: Sam Ravnborg <sam@ravnborg.org>
another great piece which helps a lot with HDMI support for the 32-bit SoCs!
I have one question below - but regardless of the answer there this gets my:
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[...]
> +       pdev = of_find_device_by_node(remote);
I am wondering if we should use something like:
    encoder_hdmi->cec_notifier_pdev

> +       if (pdev) {
> +               struct cec_connector_info conn_info;
> +               struct cec_notifier *notifier;
> +
> +               cec_fill_conn_info_from_drm(&conn_info, meson_encoder_hdmi->connector);
> +
> +               notifier = cec_notifier_conn_register(&pdev->dev, NULL, &conn_info);
> +               if (!notifier)
> +                       return -ENOMEM;
> +
> +               meson_encoder_hdmi->cec_notifier = notifier;
> +       }
and then move this logic to meson_encoder_hdmi_attach()
This would be important if .detach() and .attach() can be called
multiple times (for example during suspend and resume). But I am not
sure if that's a supported use-case.


Best regards,
Martin
Neil Armstrong Oct. 18, 2021, 7:50 a.m. UTC | #2 
Hi,

On 16/10/2021 00:07, Martin Blumenstingl wrote:
> Hi Neil,
> 
> On Fri, Oct 15, 2021 at 4:11 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> This implements the necessary change to no more use the embedded
>> connector in dw-hdmi and use the dedicated bridge connector driver
>> by passing DRM_BRIDGE_ATTACH_NO_CONNECTOR to the bridge attach call.
>>
>> The necessary connector properties are added to handle the same
>> functionalities as the embedded dw-hdmi connector, i.e. the HDR
>> metadata, the CEC notifier & other flags.
>>
>> The dw-hdmi output_port is set to 1 in order to look for a connector
>> next bridge in order to get DRM_BRIDGE_ATTACH_NO_CONNECTOR working.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> Acked-by: Sam Ravnborg <sam@ravnborg.org>
> another great piece which helps a lot with HDMI support for the 32-bit SoCs!
> I have one question below - but regardless of the answer there this gets my:
> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> 
> [...]
>> +       pdev = of_find_device_by_node(remote);
> I am wondering if we should use something like:
>     encoder_hdmi->cec_notifier_pdev
> 
>> +       if (pdev) {
>> +               struct cec_connector_info conn_info;
>> +               struct cec_notifier *notifier;
>> +
>> +               cec_fill_conn_info_from_drm(&conn_info, meson_encoder_hdmi->connector);
>> +
>> +               notifier = cec_notifier_conn_register(&pdev->dev, NULL, &conn_info);
>> +               if (!notifier)
>> +                       return -ENOMEM;
>> +
>> +               meson_encoder_hdmi->cec_notifier = notifier;
>> +       }
> and then move this logic to meson_encoder_hdmi_attach()

We can't because we create the connector after the attach.

> This would be important if .detach() and .attach() can be called
> multiple times (for example during suspend and resume). But I am not
> sure if that's a supported use-case.

Attach for now will only be done once at probe, and detach only a remove,
we don't change the bridge chaining while suspend/resume, we only reset the
pipeline state and put the old state back when resuming.

Neil

> 
> 
> Best regards,
> Martin
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/meson/Kconfig b/drivers/gpu/drm/meson/Kconfig
index 9f9281dd49f8..a4e1ed96e5e8 100644
--- a/drivers/gpu/drm/meson/Kconfig
+++ b/drivers/gpu/drm/meson/Kconfig
@@ -6,9 +6,11 @@  config DRM_MESON
 	select DRM_KMS_HELPER
 	select DRM_KMS_CMA_HELPER
 	select DRM_GEM_CMA_HELPER
+	select DRM_DISPLAY_CONNECTOR
 	select VIDEOMODE_HELPERS
 	select REGMAP_MMIO
 	select MESON_CANVAS
+	select CEC_CORE if CEC_NOTIFIER
 
 config DRM_MESON_DW_HDMI
 	tristate "HDMI Synopsys Controller support for Amlogic Meson Display"
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index fb540a503efe..5cd2b2ebbbd3 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -803,6 +803,7 @@  static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
 	dw_plat_data->input_bus_encoding = V4L2_YCBCR_ENC_709;
 	dw_plat_data->ycbcr_420_allowed = true;
 	dw_plat_data->disable_cec = true;
+	dw_plat_data->output_port = 1;
 
 	if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
 	    dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||
diff --git a/drivers/gpu/drm/meson/meson_encoder_hdmi.c b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
index 971da662c954..32f52f1c423b 100644
--- a/drivers/gpu/drm/meson/meson_encoder_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
@@ -14,8 +14,11 @@ 
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 
+#include <media/cec-notifier.h>
+
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
 #include <drm/drm_device.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_probe_helper.h>
@@ -33,8 +36,10 @@  struct meson_encoder_hdmi {
 	struct drm_encoder encoder;
 	struct drm_bridge bridge;
 	struct drm_bridge *next_bridge;
+	struct drm_connector *connector;
 	struct meson_drm *priv;
 	unsigned long output_bus_fmt;
+	struct cec_notifier *cec_notifier;
 };
 
 #define bridge_to_meson_encoder_hdmi(x) \
@@ -49,6 +54,14 @@  static int meson_encoder_hdmi_attach(struct drm_bridge *bridge,
 				 &encoder_hdmi->bridge, flags);
 }
 
+static void meson_encoder_hdmi_detach(struct drm_bridge *bridge)
+{
+	struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+
+	cec_notifier_conn_unregister(encoder_hdmi->cec_notifier);
+	encoder_hdmi->cec_notifier = NULL;
+}
+
 static void meson_encoder_hdmi_enable(struct drm_bridge *bridge)
 {
 	struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
@@ -302,11 +315,32 @@  static int meson_encoder_hdmi_atomic_check(struct drm_bridge *bridge,
 	return 0;
 }
 
+static void meson_encoder_hdmi_hpd_notify(struct drm_bridge *bridge,
+					  enum drm_connector_status status)
+{
+	struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge);
+	struct edid *edid;
+
+	if (!encoder_hdmi->cec_notifier)
+		return;
+
+	if (status == connector_status_connected) {
+		edid = drm_bridge_get_edid(encoder_hdmi->next_bridge, encoder_hdmi->connector);
+		if (!edid)
+			return;
+
+		cec_notifier_set_phys_addr_from_edid(encoder_hdmi->cec_notifier, edid);
+	} else
+		cec_notifier_phys_addr_invalidate(encoder_hdmi->cec_notifier);
+}
+
 static const struct drm_bridge_funcs meson_encoder_hdmi_bridge_funcs = {
 	.attach = meson_encoder_hdmi_attach,
+	.detach = meson_encoder_hdmi_detach,
 	.enable	= meson_encoder_hdmi_enable,
 	.disable = meson_encoder_hdmi_disable,
 	.mode_valid = meson_encoder_hdmi_mode_valid,
+	.hpd_notify = meson_encoder_hdmi_hpd_notify,
 	.atomic_enable = meson_encoder_hdmi_atomic_enable,
 	.atomic_get_input_bus_fmts = meson_encoder_hdmi_get_inp_bus_fmts,
 	.atomic_check = meson_encoder_hdmi_atomic_check,
@@ -318,6 +352,7 @@  static const struct drm_bridge_funcs meson_encoder_hdmi_bridge_funcs = {
 int meson_encoder_hdmi_init(struct meson_drm *priv)
 {
 	struct meson_encoder_hdmi *meson_encoder_hdmi;
+	struct platform_device *pdev;
 	struct device_node *remote;
 	int ret;
 
@@ -342,6 +377,7 @@  int meson_encoder_hdmi_init(struct meson_drm *priv)
 	meson_encoder_hdmi->bridge.funcs = &meson_encoder_hdmi_bridge_funcs;
 	meson_encoder_hdmi->bridge.of_node = priv->dev->of_node;
 	meson_encoder_hdmi->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
+	meson_encoder_hdmi->bridge.interlace_allowed = true;
 
 	drm_bridge_add(&meson_encoder_hdmi->bridge);
 
@@ -358,17 +394,58 @@  int meson_encoder_hdmi_init(struct meson_drm *priv)
 	meson_encoder_hdmi->encoder.possible_crtcs = BIT(0);
 
 	/* Attach HDMI Encoder Bridge to Encoder */
-	ret = drm_bridge_attach(&meson_encoder_hdmi->encoder, &meson_encoder_hdmi->bridge, NULL, 0);
+	ret = drm_bridge_attach(&meson_encoder_hdmi->encoder, &meson_encoder_hdmi->bridge, NULL,
+				DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 	if (ret) {
 		dev_err(priv->dev, "Failed to attach bridge: %d\n", ret);
 		return ret;
 	}
 
+	/* Initialize & attach Bridge Connector */
+	meson_encoder_hdmi->connector = drm_bridge_connector_init(priv->drm,
+							&meson_encoder_hdmi->encoder);
+	if (IS_ERR(meson_encoder_hdmi->connector)) {
+		dev_err(priv->dev, "Unable to create HDMI bridge connector\n");
+		return PTR_ERR(meson_encoder_hdmi->connector);
+	}
+	drm_connector_attach_encoder(meson_encoder_hdmi->connector,
+				     &meson_encoder_hdmi->encoder);
+
 	/*
 	 * We should have now in place:
-	 * encoder->[hdmi encoder bridge]->[dw-hdmi bridge]->[dw-hdmi connector]
+	 * encoder->[hdmi encoder bridge]->[dw-hdmi bridge]->[display connector bridge]->[display connector]
 	 */
 
+	/*
+	 * drm_connector_attach_max_bpc_property() requires the
+	 * connector to have a state.
+	 */
+	drm_atomic_helper_connector_reset(meson_encoder_hdmi->connector);
+
+	if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXL) ||
+	    meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) ||
+	    meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A))
+		drm_connector_attach_hdr_output_metadata_property(meson_encoder_hdmi->connector);
+
+	drm_connector_attach_max_bpc_property(meson_encoder_hdmi->connector, 8, 8);
+
+	/* Handle this here until handled by drm_bridge_connector_init() */
+	meson_encoder_hdmi->connector->ycbcr_420_allowed = true;
+
+	pdev = of_find_device_by_node(remote);
+	if (pdev) {
+		struct cec_connector_info conn_info;
+		struct cec_notifier *notifier;
+
+		cec_fill_conn_info_from_drm(&conn_info, meson_encoder_hdmi->connector);
+
+		notifier = cec_notifier_conn_register(&pdev->dev, NULL, &conn_info);
+		if (!notifier)
+			return -ENOMEM;
+
+		meson_encoder_hdmi->cec_notifier = notifier;
+	}
+
 	dev_dbg(priv->dev, "HDMI encoder initialized\n");
 
 	return 0;