| Message ID | 20211021051611.3155385-1-joy.zou@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] bindings: fsl-imx-sdma: Document 'HDMI Audio' transfer | expand |
On 21-10-21, 13:16, Joy Zou wrote: > Add hdmi audio support in sdma. Pls send a series together and chained. They appear here as disjoint patches > > Signed-off-by: Joy Zou <joy.zou@nxp.com> > --- > drivers/dma/imx-sdma.c | 38 +++++++++++++++++++++------ > include/linux/platform_data/dma-imx.h | 1 + > 2 files changed, 31 insertions(+), 8 deletions(-) > > diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c > index cacc725ca545..3a0e408f7741 100644 > --- a/drivers/dma/imx-sdma.c > +++ b/drivers/dma/imx-sdma.c > @@ -907,7 +907,10 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id) > desc = sdmac->desc; > if (desc) { > if (sdmac->flags & IMX_DMA_SG_LOOP) { > - sdma_update_channel_loop(sdmac); > + if (sdmac->peripheral_type != IMX_DMATYPE_HDMI) > + sdma_update_channel_loop(sdmac); > + else > + vchan_cyclic_callback(&desc->vd); > } else { > mxc_sdma_handle_channel_normal(sdmac); > vchan_cookie_complete(&desc->vd); > @@ -1023,6 +1026,10 @@ static void sdma_get_pc(struct sdma_channel *sdmac, > case IMX_DMATYPE_IPU_MEMORY: > emi_2_per = sdma->script_addrs->ext_mem_2_ipu_addr; > break; > + case IMX_DMATYPE_HDMI: > + emi_2_per = sdma->script_addrs->hdmi_dma_addr; > + sdmac->is_ram_script = true; > + break; > default: > break; > } > @@ -1070,11 +1077,16 @@ static int sdma_load_context(struct sdma_channel *sdmac) > /* Send by context the event mask,base address for peripheral > * and watermark level > */ > - context->gReg[0] = sdmac->event_mask[1]; > - context->gReg[1] = sdmac->event_mask[0]; > - context->gReg[2] = sdmac->per_addr; > - context->gReg[6] = sdmac->shp_addr; > - context->gReg[7] = sdmac->watermark_level; > + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) { > + context->gReg[4] = sdmac->per_addr; > + context->gReg[6] = sdmac->shp_addr; > + } else { > + context->gReg[0] = sdmac->event_mask[1]; > + context->gReg[1] = sdmac->event_mask[0]; > + context->gReg[2] = sdmac->per_addr; > + context->gReg[6] = sdmac->shp_addr; > + context->gReg[7] = sdmac->watermark_level; > + } > > bd0->mode.command = C0_SETDM; > bd0->mode.status = BD_DONE | BD_WRAP | BD_EXTD; > @@ -1420,7 +1432,7 @@ static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac, > desc->sdmac = sdmac; > desc->num_bd = bds; > > - if (sdma_alloc_bd(desc)) > + if (bds && sdma_alloc_bd(desc)) > goto err_desc_out; > > /* No slave_config called in MEMCPY case, so do here */ > @@ -1585,13 +1597,16 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( > { > struct sdma_channel *sdmac = to_sdma_chan(chan); > struct sdma_engine *sdma = sdmac->sdma; > - int num_periods = buf_len / period_len; > + int num_periods = 0; > int channel = sdmac->channel; > int i = 0, buf = 0; > struct sdma_desc *desc; > > dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel); > > + if (sdmac->peripheral_type != IMX_DMATYPE_HDMI) > + num_periods = buf_len / period_len; > + > sdma_config_write(chan, &sdmac->slave_config, direction); > > desc = sdma_transfer_init(sdmac, direction, num_periods); > @@ -1608,6 +1623,9 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( > goto err_bd_out; > } > > + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) > + return vchan_tx_prep(&sdmac->vc, &desc->vd, flags); > + > while (buf < buf_len) { > struct sdma_buffer_descriptor *bd = &desc->bd[i]; > int param; > @@ -1668,6 +1686,10 @@ static int sdma_config_write(struct dma_chan *chan, > sdmac->watermark_level |= (dmaengine_cfg->dst_maxburst << 16) & > SDMA_WATERMARK_LEVEL_HWML; > sdmac->word_size = dmaengine_cfg->dst_addr_width; > + } else if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) { > + sdmac->per_address = dmaengine_cfg->dst_addr; > + sdmac->per_address2 = dmaengine_cfg->src_addr; > + sdmac->watermark_level = 0; > } else { > sdmac->per_address = dmaengine_cfg->dst_addr; > sdmac->watermark_level = dmaengine_cfg->dst_maxburst * You missed adding cyclic capability, pls add that > diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h > index 281adbb26e6b..29ac21d40f28 100644 > --- a/include/linux/platform_data/dma-imx.h > +++ b/include/linux/platform_data/dma-imx.h > @@ -39,6 +39,7 @@ enum sdma_peripheral_type { > IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */ > IMX_DMATYPE_ASRC_SP, /* Shared ASRC */ > IMX_DMATYPE_SAI, /* SAI */ > + IMX_DMATYPE_HDMI, /* HDMI Audio */ Why is this in latform_data, these should be moved to include/dt-bindings
Hi Vinod, -----Original Message----- From: Vinod Koul <vkoul@kernel.org> Sent: 2021年10月25日 12:45 To: Joy Zou <joy.zou@nxp.com> Cc: Robin Gong <yibin.gong@nxp.com>; shawnguo@kernel.org; s.hauer@pengutronix.de; kernel@pengutronix.de; festevam@gmail.com; dl-linux-imx <linux-imx@nxp.com>; dmaengine@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org Subject: [EXT] Re: [PATCH 2/2] dmaengine: imx-sdma: support hdmi audio Caution: EXT Email On 21-10-21, 13:16, Joy Zou wrote: > Add hdmi audio support in sdma. Pls send a series together and chained. They appear here as disjoint patches The audio and dma patches always are separate. The audio driver owner will send audio patches after the dma patches are accepted. > > Signed-off-by: Joy Zou <joy.zou@nxp.com> > --- > drivers/dma/imx-sdma.c | 38 +++++++++++++++++++++------ > include/linux/platform_data/dma-imx.h | 1 + > 2 files changed, 31 insertions(+), 8 deletions(-) > > diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index > cacc725ca545..3a0e408f7741 100644 > --- a/drivers/dma/imx-sdma.c > +++ b/drivers/dma/imx-sdma.c > @@ -907,7 +907,10 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id) > desc = sdmac->desc; > if (desc) { > if (sdmac->flags & IMX_DMA_SG_LOOP) { > - sdma_update_channel_loop(sdmac); > + if (sdmac->peripheral_type != IMX_DMATYPE_HDMI) > + sdma_update_channel_loop(sdmac); > + else > + > + vchan_cyclic_callback(&desc->vd); > } else { > mxc_sdma_handle_channel_normal(sdmac); > vchan_cookie_complete(&desc->vd); @@ > -1023,6 +1026,10 @@ static void sdma_get_pc(struct sdma_channel *sdmac, > case IMX_DMATYPE_IPU_MEMORY: > emi_2_per = sdma->script_addrs->ext_mem_2_ipu_addr; > break; > + case IMX_DMATYPE_HDMI: > + emi_2_per = sdma->script_addrs->hdmi_dma_addr; > + sdmac->is_ram_script = true; > + break; > default: > break; > } > @@ -1070,11 +1077,16 @@ static int sdma_load_context(struct sdma_channel *sdmac) > /* Send by context the event mask,base address for peripheral > * and watermark level > */ > - context->gReg[0] = sdmac->event_mask[1]; > - context->gReg[1] = sdmac->event_mask[0]; > - context->gReg[2] = sdmac->per_addr; > - context->gReg[6] = sdmac->shp_addr; > - context->gReg[7] = sdmac->watermark_level; > + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) { > + context->gReg[4] = sdmac->per_addr; > + context->gReg[6] = sdmac->shp_addr; > + } else { > + context->gReg[0] = sdmac->event_mask[1]; > + context->gReg[1] = sdmac->event_mask[0]; > + context->gReg[2] = sdmac->per_addr; > + context->gReg[6] = sdmac->shp_addr; > + context->gReg[7] = sdmac->watermark_level; > + } > > bd0->mode.command = C0_SETDM; > bd0->mode.status = BD_DONE | BD_WRAP | BD_EXTD; @@ -1420,7 > +1432,7 @@ static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac, > desc->sdmac = sdmac; > desc->num_bd = bds; > > - if (sdma_alloc_bd(desc)) > + if (bds && sdma_alloc_bd(desc)) > goto err_desc_out; > > /* No slave_config called in MEMCPY case, so do here */ @@ > -1585,13 +1597,16 @@ static struct dma_async_tx_descriptor > *sdma_prep_dma_cyclic( { > struct sdma_channel *sdmac = to_sdma_chan(chan); > struct sdma_engine *sdma = sdmac->sdma; > - int num_periods = buf_len / period_len; > + int num_periods = 0; > int channel = sdmac->channel; > int i = 0, buf = 0; > struct sdma_desc *desc; > > dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel); > > + if (sdmac->peripheral_type != IMX_DMATYPE_HDMI) > + num_periods = buf_len / period_len; > + > sdma_config_write(chan, &sdmac->slave_config, direction); > > desc = sdma_transfer_init(sdmac, direction, num_periods); @@ > -1608,6 +1623,9 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( > goto err_bd_out; > } > > + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) > + return vchan_tx_prep(&sdmac->vc, &desc->vd, flags); > + > while (buf < buf_len) { > struct sdma_buffer_descriptor *bd = &desc->bd[i]; > int param; > @@ -1668,6 +1686,10 @@ static int sdma_config_write(struct dma_chan *chan, > sdmac->watermark_level |= (dmaengine_cfg->dst_maxburst << 16) & > SDMA_WATERMARK_LEVEL_HWML; > sdmac->word_size = dmaengine_cfg->dst_addr_width; > + } else if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) { > + sdmac->per_address = dmaengine_cfg->dst_addr; > + sdmac->per_address2 = dmaengine_cfg->src_addr; > + sdmac->watermark_level = 0; > } else { > sdmac->per_address = dmaengine_cfg->dst_addr; > sdmac->watermark_level = dmaengine_cfg->dst_maxburst * You missed adding cyclic capability, pls add that The design of hdmi script achieves the cyclic capability and is different from common script. > diff --git a/include/linux/platform_data/dma-imx.h > b/include/linux/platform_data/dma-imx.h > index 281adbb26e6b..29ac21d40f28 100644 > --- a/include/linux/platform_data/dma-imx.h > +++ b/include/linux/platform_data/dma-imx.h > @@ -39,6 +39,7 @@ enum sdma_peripheral_type { > IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */ > IMX_DMATYPE_ASRC_SP, /* Shared ASRC */ > IMX_DMATYPE_SAI, /* SAI */ > + IMX_DMATYPE_HDMI, /* HDMI Audio */ Why is this in latform_data, these should be moved to include/dt-bindings Just follow the previous way. It can be moved to include/dt-bindings, but it may affect the old imx platform. Thanks！ BR Joy Zou -- ~Vinod
On 18-04-22, 04:06, Joy Zou wrote: > Hi Vinod, > > -----Original Message----- > From: Vinod Koul <vkoul@kernel.org> > Sent: 2021年10月25日 12:45 > To: Joy Zou <joy.zou@nxp.com> > Cc: Robin Gong <yibin.gong@nxp.com>; shawnguo@kernel.org; s.hauer@pengutronix.de; kernel@pengutronix.de; festevam@gmail.com; dl-linux-imx <linux-imx@nxp.com>; dmaengine@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org > Subject: [EXT] Re: [PATCH 2/2] dmaengine: imx-sdma: support hdmi audio > > Caution: EXT Email > > On 21-10-21, 13:16, Joy Zou wrote: > > Add hdmi audio support in sdma. > > Pls send a series together and chained. They appear here as disjoint patches > > The audio and dma patches always are separate. The audio driver owner will send audio patches > after the dma patches are accepted. Please use the proper formating while replying, this makes it _hard_ for people to understand! Next, the whole patch series was not threaded, they appeared as disjoint patches in my mailbox. A series should appear as a single thread... Please fix that in next post
> -----Original Message----- > From: Vinod Koul <vkoul@kernel.org> > Sent: 2022年4月20日 18:19 > To: Joy Zou <joy.zou@nxp.com> > Cc: shawnguo@kernel.org; s.hauer@pengutronix.de; kernel@pengutronix.de; > festevam@gmail.com; dl-linux-imx <linux-imx@nxp.com>; > dmaengine@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > linux-kernel@vger.kernel.org > Subject: Re: [EXT] Re: [PATCH 2/2] dmaengine: imx-sdma: support hdmi audio > > > On 18-04-22, 04:06, Joy Zou wrote: > > Hi Vinod, > > > > -----Original Message----- > > From: Vinod Koul <vkoul@kernel.org> > > Sent: 2021年10月25日 12:45 > > To: Joy Zou <joy.zou@nxp.com> > > Cc: Robin Gong <yibin.gong@nxp.com>; shawnguo@kernel.org; > > s.hauer@pengutronix.de; kernel@pengutronix.de; festevam@gmail.com; > > dl-linux-imx <linux-imx@nxp.com>; dmaengine@vger.kernel.org; > > linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org > > Subject: [EXT] Re: [PATCH 2/2] dmaengine: imx-sdma: support hdmi audio > > > > > > On 21-10-21, 13:16, Joy Zou wrote: > > > Add hdmi audio support in sdma. > > > > Pls send a series together and chained. They appear here as disjoint > > patches > > > > The audio and dma patches always are separate. The audio driver owner > > will send audio patches after the dma patches are accepted. > > Please use the proper formating while replying, this makes it _hard_ for people > to understand! > > Next, the whole patch series was not threaded, they appeared as disjoint > patches in my mailbox. A series should appear as a single thread... > > Please fix that in next post I am sorry, my mailbox config was wrong. I have corrected. BR Joy Zou > -- > ~Vinod
> -----Original Message----- > From: Vinod Koul <vkoul@kernel.org> > Sent: 2021年10月25日 12:45 > To: Joy Zou <joy.zou@nxp.com> > Cc: Robin Gong <yibin.gong@nxp.com>; shawnguo@kernel.org; > s.hauer@pengutronix.de; kernel@pengutronix.de; festevam@gmail.com; > dl-linux-imx <linux-imx@nxp.com>; dmaengine@vger.kernel.org; > linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org > Subject: [EXT] Re: [PATCH 2/2] dmaengine: imx-sdma: support hdmi audio > > > On 21-10-21, 13:16, Joy Zou wrote: > > Add hdmi audio support in sdma. > > Pls send a series together and chained. They appear here as disjoint patches > The audio and dma patches always are separate. The audio driver owner can send audio patches after the dma patches are accepted. > > > > Signed-off-by: Joy Zou <joy.zou@nxp.com> > > --- > > drivers/dma/imx-sdma.c | 38 > +++++++++++++++++++++------ > > include/linux/platform_data/dma-imx.h | 1 + > > 2 files changed, 31 insertions(+), 8 deletions(-) > > > > diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index > > cacc725ca545..3a0e408f7741 100644 > > --- a/drivers/dma/imx-sdma.c > > +++ b/drivers/dma/imx-sdma.c > > @@ -907,7 +907,10 @@ static irqreturn_t sdma_int_handler(int irq, void > *dev_id) > > desc = sdmac->desc; > > if (desc) { > > if (sdmac->flags & IMX_DMA_SG_LOOP) { > > - sdma_update_channel_loop(sdmac); > > + if (sdmac->peripheral_type != > IMX_DMATYPE_HDMI) > > + > sdma_update_channel_loop(sdmac); > > + else > > + > > + vchan_cyclic_callback(&desc->vd); > > } else { > > > mxc_sdma_handle_channel_normal(sdmac); > > vchan_cookie_complete(&desc->vd); > @@ > > -1023,6 +1026,10 @@ static void sdma_get_pc(struct sdma_channel > *sdmac, > > case IMX_DMATYPE_IPU_MEMORY: > > emi_2_per = sdma->script_addrs->ext_mem_2_ipu_addr; > > break; > > + case IMX_DMATYPE_HDMI: > > + emi_2_per = sdma->script_addrs->hdmi_dma_addr; > > + sdmac->is_ram_script = true; > > + break; > > default: > > break; > > } > > @@ -1070,11 +1077,16 @@ static int sdma_load_context(struct > sdma_channel *sdmac) > > /* Send by context the event mask,base address for peripheral > > * and watermark level > > */ > > - context->gReg[0] = sdmac->event_mask[1]; > > - context->gReg[1] = sdmac->event_mask[0]; > > - context->gReg[2] = sdmac->per_addr; > > - context->gReg[6] = sdmac->shp_addr; > > - context->gReg[7] = sdmac->watermark_level; > > + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) { > > + context->gReg[4] = sdmac->per_addr; > > + context->gReg[6] = sdmac->shp_addr; > > + } else { > > + context->gReg[0] = sdmac->event_mask[1]; > > + context->gReg[1] = sdmac->event_mask[0]; > > + context->gReg[2] = sdmac->per_addr; > > + context->gReg[6] = sdmac->shp_addr; > > + context->gReg[7] = sdmac->watermark_level; > > + } > > > > bd0->mode.command = C0_SETDM; > > bd0->mode.status = BD_DONE | BD_WRAP | BD_EXTD; @@ -1420,7 > > +1432,7 @@ static struct sdma_desc *sdma_transfer_init(struct > sdma_channel *sdmac, > > desc->sdmac = sdmac; > > desc->num_bd = bds; > > > > - if (sdma_alloc_bd(desc)) > > + if (bds && sdma_alloc_bd(desc)) > > goto err_desc_out; > > > > /* No slave_config called in MEMCPY case, so do here */ @@ > > -1585,13 +1597,16 @@ static struct dma_async_tx_descriptor > > *sdma_prep_dma_cyclic( { > > struct sdma_channel *sdmac = to_sdma_chan(chan); > > struct sdma_engine *sdma = sdmac->sdma; > > - int num_periods = buf_len / period_len; > > + int num_periods = 0; > > int channel = sdmac->channel; > > int i = 0, buf = 0; > > struct sdma_desc *desc; > > > > dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel); > > > > + if (sdmac->peripheral_type != IMX_DMATYPE_HDMI) > > + num_periods = buf_len / period_len; > > + > > sdma_config_write(chan, &sdmac->slave_config, direction); > > > > desc = sdma_transfer_init(sdmac, direction, num_periods); @@ > > -1608,6 +1623,9 @@ static struct dma_async_tx_descriptor > *sdma_prep_dma_cyclic( > > goto err_bd_out; > > } > > > > + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) > > + return vchan_tx_prep(&sdmac->vc, &desc->vd, flags); > > + > > while (buf < buf_len) { > > struct sdma_buffer_descriptor *bd = &desc->bd[i]; > > int param; > > @@ -1668,6 +1686,10 @@ static int sdma_config_write(struct dma_chan > *chan, > > sdmac->watermark_level |= (dmaengine_cfg->dst_maxburst > << 16) & > > SDMA_WATERMARK_LEVEL_HWML; > > sdmac->word_size = dmaengine_cfg->dst_addr_width; > > + } else if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) { > > + sdmac->per_address = dmaengine_cfg->dst_addr; > > + sdmac->per_address2 = dmaengine_cfg->src_addr; > > + sdmac->watermark_level = 0; > > } else { > > sdmac->per_address = dmaengine_cfg->dst_addr; > > sdmac->watermark_level = dmaengine_cfg->dst_maxburst * > > You missed adding cyclic capability, pls add that The design of hdmi script achieves the cyclic capability and is different from common script. > > > diff --git a/include/linux/platform_data/dma-imx.h > > b/include/linux/platform_data/dma-imx.h > > index 281adbb26e6b..29ac21d40f28 100644 > > --- a/include/linux/platform_data/dma-imx.h > > +++ b/include/linux/platform_data/dma-imx.h > > @@ -39,6 +39,7 @@ enum sdma_peripheral_type { > > IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */ > > IMX_DMATYPE_ASRC_SP, /* Shared ASRC */ > > IMX_DMATYPE_SAI, /* SAI */ > > + IMX_DMATYPE_HDMI, /* HDMI Audio */ > > Why is this in latform_data, these should be moved to include/dt-bindings I will fix it in patch v2. > > -- > ~Vinod
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index cacc725ca545..3a0e408f7741 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -907,7 +907,10 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id) desc = sdmac->desc; if (desc) { if (sdmac->flags & IMX_DMA_SG_LOOP) { - sdma_update_channel_loop(sdmac); + if (sdmac->peripheral_type != IMX_DMATYPE_HDMI) + sdma_update_channel_loop(sdmac); + else + vchan_cyclic_callback(&desc->vd); } else { mxc_sdma_handle_channel_normal(sdmac); vchan_cookie_complete(&desc->vd); @@ -1023,6 +1026,10 @@ static void sdma_get_pc(struct sdma_channel *sdmac, case IMX_DMATYPE_IPU_MEMORY: emi_2_per = sdma->script_addrs->ext_mem_2_ipu_addr; break; + case IMX_DMATYPE_HDMI: + emi_2_per = sdma->script_addrs->hdmi_dma_addr; + sdmac->is_ram_script = true; + break; default: break; } @@ -1070,11 +1077,16 @@ static int sdma_load_context(struct sdma_channel *sdmac) /* Send by context the event mask,base address for peripheral * and watermark level */ - context->gReg[0] = sdmac->event_mask[1]; - context->gReg[1] = sdmac->event_mask[0]; - context->gReg[2] = sdmac->per_addr; - context->gReg[6] = sdmac->shp_addr; - context->gReg[7] = sdmac->watermark_level; + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) { + context->gReg[4] = sdmac->per_addr; + context->gReg[6] = sdmac->shp_addr; + } else { + context->gReg[0] = sdmac->event_mask[1]; + context->gReg[1] = sdmac->event_mask[0]; + context->gReg[2] = sdmac->per_addr; + context->gReg[6] = sdmac->shp_addr; + context->gReg[7] = sdmac->watermark_level; + } bd0->mode.command = C0_SETDM; bd0->mode.status = BD_DONE | BD_WRAP | BD_EXTD; @@ -1420,7 +1432,7 @@ static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac, desc->sdmac = sdmac; desc->num_bd = bds; - if (sdma_alloc_bd(desc)) + if (bds && sdma_alloc_bd(desc)) goto err_desc_out; /* No slave_config called in MEMCPY case, so do here */ @@ -1585,13 +1597,16 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( { struct sdma_channel *sdmac = to_sdma_chan(chan); struct sdma_engine *sdma = sdmac->sdma; - int num_periods = buf_len / period_len; + int num_periods = 0; int channel = sdmac->channel; int i = 0, buf = 0; struct sdma_desc *desc; dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel); + if (sdmac->peripheral_type != IMX_DMATYPE_HDMI) + num_periods = buf_len / period_len; + sdma_config_write(chan, &sdmac->slave_config, direction); desc = sdma_transfer_init(sdmac, direction, num_periods); @@ -1608,6 +1623,9 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( goto err_bd_out; } + if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) + return vchan_tx_prep(&sdmac->vc, &desc->vd, flags); + while (buf < buf_len) { struct sdma_buffer_descriptor *bd = &desc->bd[i]; int param; @@ -1668,6 +1686,10 @@ static int sdma_config_write(struct dma_chan *chan, sdmac->watermark_level |= (dmaengine_cfg->dst_maxburst << 16) & SDMA_WATERMARK_LEVEL_HWML; sdmac->word_size = dmaengine_cfg->dst_addr_width; + } else if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) { + sdmac->per_address = dmaengine_cfg->dst_addr; + sdmac->per_address2 = dmaengine_cfg->src_addr; + sdmac->watermark_level = 0; } else { sdmac->per_address = dmaengine_cfg->dst_addr; sdmac->watermark_level = dmaengine_cfg->dst_maxburst * diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h index 281adbb26e6b..29ac21d40f28 100644 --- a/include/linux/platform_data/dma-imx.h +++ b/include/linux/platform_data/dma-imx.h @@ -39,6 +39,7 @@ enum sdma_peripheral_type { IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */ IMX_DMATYPE_ASRC_SP, /* Shared ASRC */ IMX_DMATYPE_SAI, /* SAI */ + IMX_DMATYPE_HDMI, /* HDMI Audio */ }; enum imx_dma_prio {
Add hdmi audio support in sdma. Signed-off-by: Joy Zou <joy.zou@nxp.com> --- drivers/dma/imx-sdma.c | 38 +++++++++++++++++++++------ include/linux/platform_data/dma-imx.h | 1 + 2 files changed, 31 insertions(+), 8 deletions(-)