| Message ID | 20211026115916.31553-1-semen.protsenko@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: Kconfig: Enable MCT timer for ARCH_EXYNOS | expand |
On 26/10/2021 13:59, Sam Protsenko wrote: > Some ARM64 Exynos SoCs have MCT timer block, e.g. Exynos850 and > Exynos5433. CLKSRC_EXYNOS_MCT option is not visible unless COMPILE_TEST > is enabled. Select CLKSRC_EXYNOS_MCT option for ARM64 ARCH_EXYNOS like > it's done in arch/arm/mach-exynos/Kconfig, to enable MCT timer support > for ARM64 Exynos SoCs. > > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> > --- > arch/arm64/Kconfig.platforms | 1 + > 1 file changed, 1 insertion(+) > +CC Marek, Marc, Mark and Chanwoo, Looks like duplicated: https://lore.kernel.org/lkml/20181018095708.1527-7-m.szyprowski@samsung.com/ The topic stalled and I think this particular patch did not make sense on its own, without rest of changes from Marek. I am not sure, though... Best regards, Krzysztof
On Tue, 26 Oct 2021 at 17:03, Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> wrote: > > On 26/10/2021 13:59, Sam Protsenko wrote: > > Some ARM64 Exynos SoCs have MCT timer block, e.g. Exynos850 and > > Exynos5433. CLKSRC_EXYNOS_MCT option is not visible unless COMPILE_TEST > > is enabled. Select CLKSRC_EXYNOS_MCT option for ARM64 ARCH_EXYNOS like > > it's done in arch/arm/mach-exynos/Kconfig, to enable MCT timer support > > for ARM64 Exynos SoCs. > > > > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> > > --- > > arch/arm64/Kconfig.platforms | 1 + > > 1 file changed, 1 insertion(+) > > > > +CC Marek, Marc, Mark and Chanwoo, > Looks like duplicated: > https://lore.kernel.org/lkml/20181018095708.1527-7-m.szyprowski@samsung.com/ > > The topic stalled and I think this particular patch did not make sense > on its own, without rest of changes from Marek. I am not sure, though... > Krzysztof, Marek, That series looks nice, I'm quite interested in that being applied. Do you think I can do something to help with that (e.g. rebasing, re-sending on behalf of Marek, testing on Exynos850, etc)? > Best regards, > Krzysztof
On 28/10/2021 16:22, Sam Protsenko wrote: > On Tue, 26 Oct 2021 at 17:03, Krzysztof Kozlowski > <krzysztof.kozlowski@canonical.com> wrote: >> >> On 26/10/2021 13:59, Sam Protsenko wrote: >>> Some ARM64 Exynos SoCs have MCT timer block, e.g. Exynos850 and >>> Exynos5433. CLKSRC_EXYNOS_MCT option is not visible unless COMPILE_TEST >>> is enabled. Select CLKSRC_EXYNOS_MCT option for ARM64 ARCH_EXYNOS like >>> it's done in arch/arm/mach-exynos/Kconfig, to enable MCT timer support >>> for ARM64 Exynos SoCs. >>> >>> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> >>> --- >>> arch/arm64/Kconfig.platforms | 1 + >>> 1 file changed, 1 insertion(+) >>> >> >> +CC Marek, Marc, Mark and Chanwoo, >> Looks like duplicated: >> https://lore.kernel.org/lkml/20181018095708.1527-7-m.szyprowski@samsung.com/ >> >> The topic stalled and I think this particular patch did not make sense >> on its own, without rest of changes from Marek. I am not sure, though... >> > > Krzysztof, Marek, > > That series looks nice, I'm quite interested in that being applied. Do > you think I can do something to help with that (e.g. rebasing, > re-sending on behalf of Marek, testing on Exynos850, etc)? I think there were no objections against v4 of this patchset, but somehow it wasn't applied. Marek, Does it make sense to try respinning your v4? Best regards, Krzysztof
On 28.10.2021 16:35, Krzysztof Kozlowski wrote: > On 28/10/2021 16:22, Sam Protsenko wrote: >> On Tue, 26 Oct 2021 at 17:03, Krzysztof Kozlowski >> <krzysztof.kozlowski@canonical.com> wrote: >>> On 26/10/2021 13:59, Sam Protsenko wrote: >>>> Some ARM64 Exynos SoCs have MCT timer block, e.g. Exynos850 and >>>> Exynos5433. CLKSRC_EXYNOS_MCT option is not visible unless COMPILE_TEST >>>> is enabled. Select CLKSRC_EXYNOS_MCT option for ARM64 ARCH_EXYNOS like >>>> it's done in arch/arm/mach-exynos/Kconfig, to enable MCT timer support >>>> for ARM64 Exynos SoCs. >>>> >>>> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> >>>> --- >>>> arch/arm64/Kconfig.platforms | 1 + >>>> 1 file changed, 1 insertion(+) >>>> >>> +CC Marek, Marc, Mark and Chanwoo, >>> Looks like duplicated: >>> https://lore.kernel.org/lkml/20181018095708.1527-7-m.szyprowski@samsung.com/ >>> >>> The topic stalled and I think this particular patch did not make sense >>> on its own, without rest of changes from Marek. I am not sure, though... >>> >> Krzysztof, Marek, >> >> That series looks nice, I'm quite interested in that being applied. Do >> you think I can do something to help with that (e.g. rebasing, >> re-sending on behalf of Marek, testing on Exynos850, etc)? > I think there were no objections against v4 of this patchset, but > somehow it wasn't applied. > > Marek, > Does it make sense to try respinning your v4? I think I've abandoned it, because I got a final NACK on the arch timer change (support for 'not-fw-configured' timers). Without that the above mentioned changes doesn't make much sense. I know that the Exynos5433 firmware breaks the defined protocol, but on the other hand I can do nothing more than carrying internally those few patches out of tree to keep it fully working with 'mainline'. I've observed the same problem with newer Exynos SoCs, but those so far didn't get mainline support (yet), although there have been some attempts from the community. Best regards
On Fri, 29 Oct 2021 at 14:38, Marek Szyprowski <m.szyprowski@samsung.com> wrote: > > On 28.10.2021 16:35, Krzysztof Kozlowski wrote: > > On 28/10/2021 16:22, Sam Protsenko wrote: > >> On Tue, 26 Oct 2021 at 17:03, Krzysztof Kozlowski > >> <krzysztof.kozlowski@canonical.com> wrote: > >>> On 26/10/2021 13:59, Sam Protsenko wrote: > >>>> Some ARM64 Exynos SoCs have MCT timer block, e.g. Exynos850 and > >>>> Exynos5433. CLKSRC_EXYNOS_MCT option is not visible unless COMPILE_TEST > >>>> is enabled. Select CLKSRC_EXYNOS_MCT option for ARM64 ARCH_EXYNOS like > >>>> it's done in arch/arm/mach-exynos/Kconfig, to enable MCT timer support > >>>> for ARM64 Exynos SoCs. > >>>> > >>>> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> > >>>> --- > >>>> arch/arm64/Kconfig.platforms | 1 + > >>>> 1 file changed, 1 insertion(+) > >>>> > >>> +CC Marek, Marc, Mark and Chanwoo, > >>> Looks like duplicated: > >>> https://lore.kernel.org/lkml/20181018095708.1527-7-m.szyprowski@samsung.com/ > >>> > >>> The topic stalled and I think this particular patch did not make sense > >>> on its own, without rest of changes from Marek. I am not sure, though... > >>> > >> Krzysztof, Marek, > >> > >> That series looks nice, I'm quite interested in that being applied. Do > >> you think I can do something to help with that (e.g. rebasing, > >> re-sending on behalf of Marek, testing on Exynos850, etc)? > > I think there were no objections against v4 of this patchset, but > > somehow it wasn't applied. > > > > Marek, > > Does it make sense to try respinning your v4? > > I think I've abandoned it, because I got a final NACK on the arch timer > change (support for 'not-fw-configured' timers). Without that the above > mentioned changes doesn't make much sense. > > I know that the Exynos5433 firmware breaks the defined protocol, but on > the other hand I can do nothing more than carrying internally those few > patches out of tree to keep it fully working with 'mainline'. > > I've observed the same problem with newer Exynos SoCs, but those so far > didn't get mainline support (yet), although there have been some > attempts from the community. > There is no such problem on Exynos850 SoC (which I'm trying to upstream right now), the architectured timer seems to be working fine there, as is. Or maybe everything is configured properly in bootloader, not sure. Also I managed to use MCT as a primary clocksource (for sched_clock, etc) by disabling arch timer in arch/arm64/kernel/time.c (just for the sake of test), and it works fine. So I still would like to have MCT enabled in kernel: this way we can at least test the driver, as the clocksource can be changed to MCT via sysfs (or by disabling arch timer in time.c). And for that we need to at least enable CLKSRC_EXYNOS_MCT in ARCH_EXYNOS. I guess all your patches (except one you mentioned) from that series should be fine to apply. Do you mind if I re-send your patch series (minus one patch) on your behalf? That would spare you some boring work, and at least minimize your local delta you're carrying. Thanks! > Best regards > > -- > Marek Szyprowski, PhD > Samsung R&D Institute Poland >
On 29.10.2021 15:15, Sam Protsenko wrote: > On Fri, 29 Oct 2021 at 14:38, Marek Szyprowski <m.szyprowski@samsung.com> wrote: >> On 28.10.2021 16:35, Krzysztof Kozlowski wrote: >>> On 28/10/2021 16:22, Sam Protsenko wrote: >>>> On Tue, 26 Oct 2021 at 17:03, Krzysztof Kozlowski >>>> <krzysztof.kozlowski@canonical.com> wrote: >>>>> On 26/10/2021 13:59, Sam Protsenko wrote: >>>>>> Some ARM64 Exynos SoCs have MCT timer block, e.g. Exynos850 and >>>>>> Exynos5433. CLKSRC_EXYNOS_MCT option is not visible unless COMPILE_TEST >>>>>> is enabled. Select CLKSRC_EXYNOS_MCT option for ARM64 ARCH_EXYNOS like >>>>>> it's done in arch/arm/mach-exynos/Kconfig, to enable MCT timer support >>>>>> for ARM64 Exynos SoCs. >>>>>> >>>>>> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> >>>>>> --- >>>>>> arch/arm64/Kconfig.platforms | 1 + >>>>>> 1 file changed, 1 insertion(+) >>>>>> >>>>> +CC Marek, Marc, Mark and Chanwoo, >>>>> Looks like duplicated: >>>>> https://lore.kernel.org/lkml/20181018095708.1527-7-m.szyprowski@samsung.com/ >>>>> >>>>> The topic stalled and I think this particular patch did not make sense >>>>> on its own, without rest of changes from Marek. I am not sure, though... >>>>> >>>> Krzysztof, Marek, >>>> >>>> That series looks nice, I'm quite interested in that being applied. Do >>>> you think I can do something to help with that (e.g. rebasing, >>>> re-sending on behalf of Marek, testing on Exynos850, etc)? >>> I think there were no objections against v4 of this patchset, but >>> somehow it wasn't applied. >>> >>> Marek, >>> Does it make sense to try respinning your v4? >> I think I've abandoned it, because I got a final NACK on the arch timer >> change (support for 'not-fw-configured' timers). Without that the above >> mentioned changes doesn't make much sense. >> >> I know that the Exynos5433 firmware breaks the defined protocol, but on >> the other hand I can do nothing more than carrying internally those few >> patches out of tree to keep it fully working with 'mainline'. >> >> I've observed the same problem with newer Exynos SoCs, but those so far >> didn't get mainline support (yet), although there have been some >> attempts from the community. >> > There is no such problem on Exynos850 SoC (which I'm trying to > upstream right now), the architectured timer seems to be working fine > there, as is. Or maybe everything is configured properly in > bootloader, not sure. Also I managed to use MCT as a primary > clocksource (for sched_clock, etc) by disabling arch timer in > arch/arm64/kernel/time.c (just for the sake of test), and it works > fine. So I still would like to have MCT enabled in kernel: this way > we can at least test the driver, as the clocksource can be changed to > MCT via sysfs (or by disabling arch timer in time.c). And for that we > need to at least enable CLKSRC_EXYNOS_MCT in ARCH_EXYNOS. MCT can be also set as default by changing its rating, like it is done under #ifdef CONFIG_ARM. > I guess all your patches (except one you mentioned) from that series > should be fine to apply. Do you mind if I re-send your patch series > (minus one patch) on your behalf? That would spare you some boring > work, and at least minimize your local delta you're carrying. Feel free to resend it. Best regards
On Fri, 29 Oct 2021 at 16:36, Marek Szyprowski <m.szyprowski@samsung.com> wrote: > > On 29.10.2021 15:15, Sam Protsenko wrote: > > On Fri, 29 Oct 2021 at 14:38, Marek Szyprowski <m.szyprowski@samsung.com> wrote: > >> On 28.10.2021 16:35, Krzysztof Kozlowski wrote: > >>> On 28/10/2021 16:22, Sam Protsenko wrote: > >>>> On Tue, 26 Oct 2021 at 17:03, Krzysztof Kozlowski > >>>> <krzysztof.kozlowski@canonical.com> wrote: > >>>>> On 26/10/2021 13:59, Sam Protsenko wrote: > >>>>>> Some ARM64 Exynos SoCs have MCT timer block, e.g. Exynos850 and > >>>>>> Exynos5433. CLKSRC_EXYNOS_MCT option is not visible unless COMPILE_TEST > >>>>>> is enabled. Select CLKSRC_EXYNOS_MCT option for ARM64 ARCH_EXYNOS like > >>>>>> it's done in arch/arm/mach-exynos/Kconfig, to enable MCT timer support > >>>>>> for ARM64 Exynos SoCs. > >>>>>> > >>>>>> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> > >>>>>> --- > >>>>>> arch/arm64/Kconfig.platforms | 1 + > >>>>>> 1 file changed, 1 insertion(+) > >>>>>> > >>>>> +CC Marek, Marc, Mark and Chanwoo, > >>>>> Looks like duplicated: > >>>>> https://lore.kernel.org/lkml/20181018095708.1527-7-m.szyprowski@samsung.com/ > >>>>> > >>>>> The topic stalled and I think this particular patch did not make sense > >>>>> on its own, without rest of changes from Marek. I am not sure, though... > >>>>> > >>>> Krzysztof, Marek, > >>>> > >>>> That series looks nice, I'm quite interested in that being applied. Do > >>>> you think I can do something to help with that (e.g. rebasing, > >>>> re-sending on behalf of Marek, testing on Exynos850, etc)? > >>> I think there were no objections against v4 of this patchset, but > >>> somehow it wasn't applied. > >>> > >>> Marek, > >>> Does it make sense to try respinning your v4? > >> I think I've abandoned it, because I got a final NACK on the arch timer > >> change (support for 'not-fw-configured' timers). Without that the above > >> mentioned changes doesn't make much sense. > >> > >> I know that the Exynos5433 firmware breaks the defined protocol, but on > >> the other hand I can do nothing more than carrying internally those few > >> patches out of tree to keep it fully working with 'mainline'. > >> > >> I've observed the same problem with newer Exynos SoCs, but those so far > >> didn't get mainline support (yet), although there have been some > >> attempts from the community. > >> > > There is no such problem on Exynos850 SoC (which I'm trying to > > upstream right now), the architectured timer seems to be working fine > > there, as is. Or maybe everything is configured properly in > > bootloader, not sure. Also I managed to use MCT as a primary > > clocksource (for sched_clock, etc) by disabling arch timer in > > arch/arm64/kernel/time.c (just for the sake of test), and it works > > fine. So I still would like to have MCT enabled in kernel: this way > > we can at least test the driver, as the clocksource can be changed to > > MCT via sysfs (or by disabling arch timer in time.c). And for that we > > need to at least enable CLKSRC_EXYNOS_MCT in ARCH_EXYNOS. > MCT can be also set as default by changing its rating, like it is done > under #ifdef CONFIG_ARM. > > I guess all your patches (except one you mentioned) from that series > > should be fine to apply. Do you mind if I re-send your patch series > > (minus one patch) on your behalf? That would spare you some boring > > work, and at least minimize your local delta you're carrying. > > Feel free to resend it. > Thanks! This patch of mine should be ignored then, I'll re-submit Marek's patches soon. > Best regards > > -- > Marek Szyprowski, PhD > Samsung R&D Institute Poland >
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 1aa8b7073218..7a6ef7883a0b 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -95,6 +95,7 @@ config ARCH_EXYNOS select PINCTRL_EXYNOS select PM_GENERIC_DOMAINS if PM select SOC_SAMSUNG + select CLKSRC_EXYNOS_MCT help This enables support for ARMv8 based Samsung Exynos SoC family.
Some ARM64 Exynos SoCs have MCT timer block, e.g. Exynos850 and Exynos5433. CLKSRC_EXYNOS_MCT option is not visible unless COMPILE_TEST is enabled. Select CLKSRC_EXYNOS_MCT option for ARM64 ARCH_EXYNOS like it's done in arch/arm/mach-exynos/Kconfig, to enable MCT timer support for ARM64 Exynos SoCs. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> --- arch/arm64/Kconfig.platforms | 1 + 1 file changed, 1 insertion(+)