diff mbox series

[v6,1/2] dt-bindings: arm: Add OP-TEE transport for SCMI

Message ID 20211026152128.5834-1-etienne.carriere@linaro.org (mailing list archive)
State New, archived
Headers show
Series [v6,1/2] dt-bindings: arm: Add OP-TEE transport for SCMI | expand

Commit Message

Etienne Carriere Oct. 26, 2021, 3:21 p.m. UTC
Introduce compatible "linaro,scmi-optee" for SCMI transport channel
based on an OP-TEE service invocation. The compatible mandates a
channel ID defined with property "linaro,optee-channel-id".

Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
---
No change since v5

Changes since v4:
 - Fix sram node name in DTS example: s/-shm-/-sram-/

Changes since v3:
 - Add description for linaro,optee-channel-id in patternProperties
   specifying protocol can optionaly define a dedicated channel id.
 - Fix DTS example (duplicated phandles issue, subnodes ordering)
 - Fix typo in DTS example and description comments.

Changes since v2:
 - Define mandatory property linaro,optee-channel-id
 - Rebased on yaml description file

Changes since v1:
 - Removed modification regarding mboxes property description.
---
 .../bindings/firmware/arm,scmi.yaml           | 66 +++++++++++++++++++
 1 file changed, 66 insertions(+)

Comments

Rob Herring (Arm) Oct. 27, 2021, 8:28 p.m. UTC | #1
On Tue, Oct 26, 2021 at 05:21:27PM +0200, Etienne Carriere wrote:
> Introduce compatible "linaro,scmi-optee" for SCMI transport channel
> based on an OP-TEE service invocation. The compatible mandates a
> channel ID defined with property "linaro,optee-channel-id".
> 
> Cc: devicetree@vger.kernel.org
> Cc: Rob Herring <robh+dt@kernel.org>
> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
> ---
> No change since v5
> 
> Changes since v4:
>  - Fix sram node name in DTS example: s/-shm-/-sram-/
> 
> Changes since v3:
>  - Add description for linaro,optee-channel-id in patternProperties
>    specifying protocol can optionaly define a dedicated channel id.
>  - Fix DTS example (duplicated phandles issue, subnodes ordering)
>  - Fix typo in DTS example and description comments.
> 
> Changes since v2:
>  - Define mandatory property linaro,optee-channel-id
>  - Rebased on yaml description file
> 
> Changes since v1:
>  - Removed modification regarding mboxes property description.
> ---
>  .../bindings/firmware/arm,scmi.yaml           | 66 +++++++++++++++++++
>  1 file changed, 66 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> index 5c4c6782e052..d09ebc80e713 100644
> --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
> @@ -38,6 +38,9 @@ properties:
>                       The virtio transport only supports a single device.
>          items:
>            - const: arm,scmi-virtio
> +      - description: SCMI compliant firmware with OP-TEE transport
> +        items:
> +          - const: linaro,scmi-optee
>  
>    interrupts:
>      description:
> @@ -83,6 +86,11 @@ properties:
>      description:
>        SMC id required when using smc or hvc transports
>  
> +  linaro,optee-channel-id:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Channel specifier required when using OP-TEE transport.
> +
>    protocol@11:
>      type: object
>      properties:
> @@ -195,6 +203,13 @@ patternProperties:
>          minItems: 1
>          maxItems: 2
>  
> +      linaro,optee-channel-id:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description:
> +          Channel specifier required when using OP-TEE transport and
> +          protocol has a dedicated communication channel.
> +        maxItems: 1

Don't need maxItems.

> +
>      required:
>        - reg
>  
> @@ -226,6 +241,16 @@ else:
>        - arm,smc-id
>        - shmem
>  
> +  else:
> +    if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: linaro,scmi-optee
> +    then:
> +      required:
> +        - linaro,optee-channel-id
> +
>  examples:
>    - |
>      firmware {
> @@ -340,7 +365,48 @@ examples:
>                  reg = <0x11>;
>                  #power-domain-cells = <1>;
>              };
> +        };
> +    };
>  
> +  - |
> +    firmware {
> +        scmi {
> +            compatible = "linaro,scmi-optee";
> +            linaro,optee-channel-id = <0>;
> +
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            scmi_dvfs1: protocol@13 {
> +                reg = <0x13>;
> +                linaro,optee-channel-id = <1>;
> +                shmem = <&cpu_optee_lpri0>;
> +                #clock-cells = <1>;
> +            };
> +
> +            scmi_clk0: protocol@14 {
> +                reg = <0x14>;
> +                #clock-cells = <1>;
> +            };
> +        };
> +    };
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        sram@51000000 {
> +            compatible = "mmio-sram";
> +            reg = <0x0 0x51000000 0x0 0x10000>;
> +
> +            #address-cells = <1>;
> +            #size-cells = <1>;
> +            ranges = <0 0x0 0x51000000 0x10000>;
> +
> +            cpu_optee_lpri0: optee-sram-section@0 {
> +                compatible = "arm,scmi-shmem";
> +                reg = <0x0 0x80>;
> +            };
>          };
>      };
>  
> -- 
> 2.17.1
> 
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index 5c4c6782e052..d09ebc80e713 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -38,6 +38,9 @@  properties:
                      The virtio transport only supports a single device.
         items:
           - const: arm,scmi-virtio
+      - description: SCMI compliant firmware with OP-TEE transport
+        items:
+          - const: linaro,scmi-optee
 
   interrupts:
     description:
@@ -83,6 +86,11 @@  properties:
     description:
       SMC id required when using smc or hvc transports
 
+  linaro,optee-channel-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Channel specifier required when using OP-TEE transport.
+
   protocol@11:
     type: object
     properties:
@@ -195,6 +203,13 @@  patternProperties:
         minItems: 1
         maxItems: 2
 
+      linaro,optee-channel-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Channel specifier required when using OP-TEE transport and
+          protocol has a dedicated communication channel.
+        maxItems: 1
+
     required:
       - reg
 
@@ -226,6 +241,16 @@  else:
       - arm,smc-id
       - shmem
 
+  else:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: linaro,scmi-optee
+    then:
+      required:
+        - linaro,optee-channel-id
+
 examples:
   - |
     firmware {
@@ -340,7 +365,48 @@  examples:
                 reg = <0x11>;
                 #power-domain-cells = <1>;
             };
+        };
+    };
 
+  - |
+    firmware {
+        scmi {
+            compatible = "linaro,scmi-optee";
+            linaro,optee-channel-id = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            scmi_dvfs1: protocol@13 {
+                reg = <0x13>;
+                linaro,optee-channel-id = <1>;
+                shmem = <&cpu_optee_lpri0>;
+                #clock-cells = <1>;
+            };
+
+            scmi_clk0: protocol@14 {
+                reg = <0x14>;
+                #clock-cells = <1>;
+            };
+        };
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        sram@51000000 {
+            compatible = "mmio-sram";
+            reg = <0x0 0x51000000 0x0 0x10000>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0x0 0x51000000 0x10000>;
+
+            cpu_optee_lpri0: optee-sram-section@0 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x0 0x80>;
+            };
         };
     };