diff mbox series

media: aspeed: Fix signal status not updated immediately

Message ID 20211108061155.14479-1-jammy_huang@aspeedtech.com (mailing list archive)
State New, archived
Headers show
Series media: aspeed: Fix signal status not updated immediately | expand

Commit Message

Jammy Huang Nov. 8, 2021, 6:11 a.m. UTC
If res-chg, VE_INTERRUPT_MODE_DETECT_WD irq will be raised. But
v4l2_input_status wont't be updated to no-signal immediately until
aspeed_video_get_resolution() in aspeed_video_resolution_work().

During the period of time, aspeed_video_start_frame() could be called
because it doesn't know signal is unstable now. If it goes with
aspeed_video_init_regs() of aspeed_video_irq_res_change() simultaneously
, it will mess up hw state.

To fix this problem, v4l2_input_status will be updated to no-signal
immediately for VE_INTERRUPT_MODE_DETECT_WD irq.

Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
 drivers/media/platform/aspeed-video.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Paul Menzel Nov. 8, 2021, 7:57 a.m. UTC | #1
Dear Jammy,


Am 08.11.21 um 07:11 schrieb Jammy Huang:

Maybe for the commit message summary:

media: aspeed: Update signal status immediately to ensure sane hw state


> If res-chg, VE_INTERRUPT_MODE_DETECT_WD irq will be raised. But
> v4l2_input_status wont't be updated to no-signal immediately until

won’t

> aspeed_video_get_resolution() in aspeed_video_resolution_work().
> 
> During the period of time, aspeed_video_start_frame() could be called
> because it doesn't know signal is unstable now. If it goes with
> aspeed_video_init_regs() of aspeed_video_irq_res_change() simultaneously
> , it will mess up hw state.

Please do not start a line with a comma, for example, put the comma on 
the line above.

> To fix this problem, v4l2_input_status will be updated to no-signal

… status is updated _ (Present tense in commit messages.)

> immediately for VE_INTERRUPT_MODE_DETECT_WD irq.
> 
> Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
> Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
> ---
>   drivers/media/platform/aspeed-video.c | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
> index 1ade264a8b69..3facd7ecc1a1 100644
> --- a/drivers/media/platform/aspeed-video.c
> +++ b/drivers/media/platform/aspeed-video.c
> @@ -762,6 +762,8 @@ static void aspeed_video_irq_res_change(struct aspeed_video *video, ulong delay)
>   	set_bit(VIDEO_RES_CHANGE, &video->flags);
>   	clear_bit(VIDEO_FRAME_INPRG, &video->flags);
>   
> +	video->v4l2_input_status = V4L2_IN_ST_NO_SIGNAL;
> +
>   	aspeed_video_off(video);
>   	aspeed_video_on(video);
>   	aspeed_video_bufs_done(video, VB2_BUF_STATE_ERROR);
> @@ -1889,7 +1891,6 @@ static void aspeed_video_resolution_work(struct work_struct *work)
>   	struct delayed_work *dwork = to_delayed_work(work);
>   	struct aspeed_video *video = container_of(dwork, struct aspeed_video,
>   						  res_work);
> -	u32 input_status = video->v4l2_input_status;
>   
>   	/* Exit early in case no clients remain */
>   	if (test_bit(VIDEO_STOPPED, &video->flags))
> @@ -1902,8 +1903,7 @@ static void aspeed_video_resolution_work(struct work_struct *work)
>   	aspeed_video_get_resolution(video);
>   
>   	if (video->detected_timings.width != video->active_timings.width ||
> -	    video->detected_timings.height != video->active_timings.height ||
> -	    input_status != video->v4l2_input_status) {
> +	    video->detected_timings.height != video->active_timings.height) {
>   		static const struct v4l2_event ev = {
>   			.type = V4L2_EVENT_SOURCE_CHANGE,
>   			.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
> 

Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>


Kind regards,

Paul
Jammy Huang Nov. 9, 2021, 12:40 a.m. UTC | #2
Dear Paul,

Thanks for your help. I will update in the next patch.

On 2021/11/8 下午 03:57, Paul Menzel wrote:
> Dear Jammy,
>
>
> Am 08.11.21 um 07:11 schrieb Jammy Huang:
>
> Maybe for the commit message summary:
>
> media: aspeed: Update signal status immediately to ensure sane hw state
>
>
>> If res-chg, VE_INTERRUPT_MODE_DETECT_WD irq will be raised. But
>> v4l2_input_status wont't be updated to no-signal immediately until
> won’t
>
>> aspeed_video_get_resolution() in aspeed_video_resolution_work().
>>
>> During the period of time, aspeed_video_start_frame() could be called
>> because it doesn't know signal is unstable now. If it goes with
>> aspeed_video_init_regs() of aspeed_video_irq_res_change() simultaneously
>> , it will mess up hw state.
> Please do not start a line with a comma, for example, put the comma on
> the line above.
>
>> To fix this problem, v4l2_input_status will be updated to no-signal
> … status is updated _ (Present tense in commit messages.)
>
>> immediately for VE_INTERRUPT_MODE_DETECT_WD irq.
>>
>> Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
>> Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
>> ---
>>    drivers/media/platform/aspeed-video.c | 6 +++---
>>    1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
>> index 1ade264a8b69..3facd7ecc1a1 100644
>> --- a/drivers/media/platform/aspeed-video.c
>> +++ b/drivers/media/platform/aspeed-video.c
>> @@ -762,6 +762,8 @@ static void aspeed_video_irq_res_change(struct aspeed_video *video, ulong delay)
>>    	set_bit(VIDEO_RES_CHANGE, &video->flags);
>>    	clear_bit(VIDEO_FRAME_INPRG, &video->flags);
>>    
>> +	video->v4l2_input_status = V4L2_IN_ST_NO_SIGNAL;
>> +
>>    	aspeed_video_off(video);
>>    	aspeed_video_on(video);
>>    	aspeed_video_bufs_done(video, VB2_BUF_STATE_ERROR);
>> @@ -1889,7 +1891,6 @@ static void aspeed_video_resolution_work(struct work_struct *work)
>>    	struct delayed_work *dwork = to_delayed_work(work);
>>    	struct aspeed_video *video = container_of(dwork, struct aspeed_video,
>>    						  res_work);
>> -	u32 input_status = video->v4l2_input_status;
>>    
>>    	/* Exit early in case no clients remain */
>>    	if (test_bit(VIDEO_STOPPED, &video->flags))
>> @@ -1902,8 +1903,7 @@ static void aspeed_video_resolution_work(struct work_struct *work)
>>    	aspeed_video_get_resolution(video);
>>    
>>    	if (video->detected_timings.width != video->active_timings.width ||
>> -	    video->detected_timings.height != video->active_timings.height ||
>> -	    input_status != video->v4l2_input_status) {
>> +	    video->detected_timings.height != video->active_timings.height) {
>>    		static const struct v4l2_event ev = {
>>    			.type = V4L2_EVENT_SOURCE_CHANGE,
>>    			.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
>>
> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
>
>
> Kind regards,
>
> Paul
diff mbox series

Patch

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 1ade264a8b69..3facd7ecc1a1 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -762,6 +762,8 @@  static void aspeed_video_irq_res_change(struct aspeed_video *video, ulong delay)
 	set_bit(VIDEO_RES_CHANGE, &video->flags);
 	clear_bit(VIDEO_FRAME_INPRG, &video->flags);
 
+	video->v4l2_input_status = V4L2_IN_ST_NO_SIGNAL;
+
 	aspeed_video_off(video);
 	aspeed_video_on(video);
 	aspeed_video_bufs_done(video, VB2_BUF_STATE_ERROR);
@@ -1889,7 +1891,6 @@  static void aspeed_video_resolution_work(struct work_struct *work)
 	struct delayed_work *dwork = to_delayed_work(work);
 	struct aspeed_video *video = container_of(dwork, struct aspeed_video,
 						  res_work);
-	u32 input_status = video->v4l2_input_status;
 
 	/* Exit early in case no clients remain */
 	if (test_bit(VIDEO_STOPPED, &video->flags))
@@ -1902,8 +1903,7 @@  static void aspeed_video_resolution_work(struct work_struct *work)
 	aspeed_video_get_resolution(video);
 
 	if (video->detected_timings.width != video->active_timings.width ||
-	    video->detected_timings.height != video->active_timings.height ||
-	    input_status != video->v4l2_input_status) {
+	    video->detected_timings.height != video->active_timings.height) {
 		static const struct v4l2_event ev = {
 			.type = V4L2_EVENT_SOURCE_CHANGE,
 			.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,