diff mbox series

[2/2] arm64: dts: marvell: cn9130: enable CP0 GPIO controllers

Message ID 20211112134403.1016717-2-robert.marko@sartura.hr (mailing list archive)
State New, archived
Headers show
Series [1/2] arm64: dts: marvell: cn9130: add GPIO and SPI aliases | expand

Commit Message

Robert Marko Nov. 12, 2021, 1:44 p.m. UTC 
CN9130 has a built-in CP115 which has 2 GPIO controllers, but unlike in
Armada 7k and 8k both are left disabled by the SoC DTSI.

This first of all makes no sense as they are always present due to being
SoC built-in and its an issue as boards like CN9130-CRB use the CPO GPIO2
pins for regulators and SD card support without enabling them first.

So, enable both of them like Armada 7k and 8k do.

Fixes: 6b8970bd8d7a ("arm64: dts: marvell: Add support for Marvell CN9130 SoC support")

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
 arch/arm64/boot/dts/marvell/cn9130.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/marvell/cn9130.dtsi b/arch/arm64/boot/dts/marvell/cn9130.dtsi
index 71769ac7f058..327b04134134 100644
--- a/arch/arm64/boot/dts/marvell/cn9130.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi
@@ -42,3 +42,11 @@  aliases {
 #undef CP11X_PCIE0_BASE
 #undef CP11X_PCIE1_BASE
 #undef CP11X_PCIE2_BASE
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};