@@ -17,6 +17,7 @@
#include <linux/pinctrl/pinmux.h>
#include <linux/platform_device.h>
#include <linux/property.h>
+#include <linux/regmap.h>
#include <linux/reset.h>
#include "core.h"
@@ -113,7 +114,7 @@ struct sgpio_priv {
u32 bitcount;
u32 ports;
u32 clock;
- u32 __iomem *regs;
+ struct regmap *regs;
const struct sgpio_properties *properties;
};
@@ -134,31 +135,42 @@ static inline int sgpio_addr_to_pin(struct sgpio_priv *priv, int port, int bit)
return bit + port * priv->bitcount;
}
-static inline u32 sgpio_readl(struct sgpio_priv *priv, u32 rno, u32 off)
+static inline u32 sgpio_get_addr(struct sgpio_priv *priv, u32 rno, u32 off)
+{
+ return priv->properties->regoff[rno] + off;
+}
+
+static u32 sgpio_readl(struct sgpio_priv *priv, u32 rno, u32 off)
{
- u32 __iomem *reg = &priv->regs[priv->properties->regoff[rno] + off];
+ u32 addr = sgpio_get_addr(priv, rno, off);
+ u32 val = 0;
+ int ret;
- return readl(reg);
+ ret = regmap_read(priv->regs, addr, &val);
+ WARN_ONCE(ret, "error reading sgpio reg %d\n", ret);
+
+ return val;
}
-static inline void sgpio_writel(struct sgpio_priv *priv,
+static void sgpio_writel(struct sgpio_priv *priv,
u32 val, u32 rno, u32 off)
{
- u32 __iomem *reg = &priv->regs[priv->properties->regoff[rno] + off];
+ u32 addr = sgpio_get_addr(priv, rno, off);
+ int ret;
- writel(val, reg);
+ ret = regmap_write(priv->regs, addr, val);
+ WARN_ONCE(ret, "error writing sgpio reg %d\n", ret);
}
static inline void sgpio_clrsetbits(struct sgpio_priv *priv,
u32 rno, u32 off, u32 clear, u32 set)
{
- u32 __iomem *reg = &priv->regs[priv->properties->regoff[rno] + off];
- u32 val = readl(reg);
+ u32 val = sgpio_readl(priv, rno, off);
val &= ~clear;
val |= set;
- writel(val, reg);
+ sgpio_writel(priv, val, rno, off);
}
static inline void sgpio_configure_bitstream(struct sgpio_priv *priv)
@@ -807,7 +819,13 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
struct reset_control *reset;
struct sgpio_priv *priv;
struct clk *clk;
+ u32 __iomem *regs;
u32 val;
+ struct regmap_config regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ };
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -832,9 +850,14 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
return -EINVAL;
}
- priv->regs = devm_platform_ioremap_resource(pdev, 0);
+ regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ priv->regs = devm_regmap_init_mmio(dev, regs, ®map_config);
if (IS_ERR(priv->regs))
return PTR_ERR(priv->regs);
+
priv->properties = device_get_match_data(dev);
priv->in.is_input = true;
Adopt regmap instead of a direct memory map so that custom regmaps and other interfaces can be supported. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> --- drivers/pinctrl/pinctrl-microchip-sgpio.c | 45 +++++++++++++++++------ 1 file changed, 34 insertions(+), 11 deletions(-)