@@ -118,6 +118,21 @@ config ARM_SCMI_TRANSPORT_VIRTIO_VERSION1_COMPLIANCE
the ones implemented by kvmtool) and let the core Kernel VirtIO layer
take care of the needed conversions, say N.
+config ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE
+ bool "Enable atomic mode for SCMI VirtIO transport"
+ depends on ARM_SCMI_TRANSPORT_VIRTIO
+ help
+ Enable support of atomic operation for SCMI VirtIO based transport.
+
+ If you want the SCMI VirtIO based transport to operate in atomic
+ mode, avoiding any kind of sleeping behaviour for selected
+ transactions on the TX path, answer Y.
+
+ Enabling atomic mode operations allows any SCMI driver using this
+ transport to optionally ask for atomic SCMI transactions and operate
+ in atomic context too, at the price of using a number of busy-waiting
+ primitives all over instead. If unsure say N.
+
endif #ARM_SCMI_PROTOCOL
config ARM_SCMI_POWER_DOMAIN
@@ -38,6 +38,7 @@
* @vqueue: Associated virtqueue
* @cinfo: SCMI Tx or Rx channel
* @free_list: List of unused scmi_vio_msg, maintained for Tx channels only
+ * @pending_cmds_list: List of pre-fetched commands queueud for later processing
* @is_rx: Whether channel is an Rx channel
* @ready: Whether transport user is ready to hear about channel
* @max_msg: Maximum number of pending messages for this channel.
@@ -49,6 +50,9 @@ struct scmi_vio_channel {
struct virtqueue *vqueue;
struct scmi_chan_info *cinfo;
struct list_head free_list;
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE
+ struct list_head pending_cmds_list;
+#endif
bool is_rx;
bool ready;
unsigned int max_msg;
@@ -65,12 +69,22 @@ struct scmi_vio_channel {
* @input: SDU used for (delayed) responses and notifications
* @list: List which scmi_vio_msg may be part of
* @rx_len: Input SDU size in bytes, once input has been received
+ * @poll_idx: Last used index registered for polling purposes if this message
+ * transaction reply was configured for polling.
+ * Note that virtqueue used index is an unsigned 16-bit.
+ * @poll_lock: Protect access to @poll_idx.
*/
struct scmi_vio_msg {
struct scmi_msg_payld *request;
struct scmi_msg_payld *input;
struct list_head list;
unsigned int rx_len;
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE
+#define VIO_MSG_POLL_DONE 0xffffffffUL
+ unsigned int poll_idx;
+ /* lock to protect access to poll_idx. */
+ spinlock_t poll_lock;
+#endif
};
/* Only one SCMI VirtIO device can possibly exist */
@@ -104,17 +118,22 @@ static int scmi_vio_feed_vq_rx(struct scmi_vio_channel *vioch,
return rc;
}
+static inline void scmi_vio_feed_vq_tx(struct scmi_vio_channel *vioch,
+ struct scmi_vio_msg *msg)
+{
+ /* Here IRQs are assumed to be already disabled by the caller */
+ spin_lock(&vioch->lock);
+ list_add(&msg->list, &vioch->free_list);
+ spin_unlock(&vioch->lock);
+}
+
static void scmi_finalize_message(struct scmi_vio_channel *vioch,
struct scmi_vio_msg *msg)
{
- if (vioch->is_rx) {
+ if (vioch->is_rx)
scmi_vio_feed_vq_rx(vioch, msg, vioch->cinfo->dev);
- } else {
- /* Here IRQs are assumed to be already disabled by the caller */
- spin_lock(&vioch->lock);
- list_add(&msg->list, &vioch->free_list);
- spin_unlock(&vioch->lock);
- }
+ else
+ scmi_vio_feed_vq_tx(vioch, msg);
}
static void scmi_vio_complete_cb(struct virtqueue *vqueue)
@@ -138,12 +157,29 @@ static void scmi_vio_complete_cb(struct virtqueue *vqueue)
goto unlock_ready_out;
}
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE
+ /* At first loop on pending_cmd_list of buffered msg if any */
+ if (!vioch->is_rx) {
+ struct scmi_vio_msg *tmp;
+
+ list_for_each_entry_safe(msg, tmp,
+ &vioch->pending_cmds_list,
+ list) {
+ scmi_rx_callback(vioch->cinfo,
+ msg_read_header(msg->input),
+ msg);
+ scmi_vio_feed_vq_tx(vioch, msg);
+ }
+ }
+#endif
+
/* IRQs already disabled here no need to irqsave */
spin_lock(&vioch->lock);
if (cb_enabled) {
virtqueue_disable_cb(vqueue);
cb_enabled = false;
}
+
msg = virtqueue_get_buf(vqueue, &length);
if (!msg) {
if (virtqueue_enable_cb(vqueue))
@@ -257,6 +293,9 @@ static int virtio_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
GFP_KERNEL);
if (!msg->request)
return -ENOMEM;
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE
+ spin_lock_init(&msg->poll_lock);
+#endif
}
msg->input = devm_kzalloc(cinfo->dev, VIRTIO_SCMI_MAX_PDU_SIZE,
@@ -324,13 +363,23 @@ static int virtio_send_message(struct scmi_chan_info *cinfo,
}
msg = list_first_entry(&vioch->free_list, typeof(*msg), list);
- list_del(&msg->list);
+ list_del_init(&msg->list);
msg_tx_prepare(msg->request, xfer);
sg_init_one(&sg_out, msg->request, msg_command_size(xfer));
sg_init_one(&sg_in, msg->input, msg_response_size(xfer));
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE
+ if (xfer->hdr.poll_completion) {
+ /* Retrieve last used index and use it as polling reference. */
+ spin_lock(&msg->poll_lock);
+ msg->poll_idx = virtqueue_enable_cb_prepare(vioch->vqueue);
+ spin_unlock(&msg->poll_lock);
+ xfer->priv = msg;
+ }
+#endif
+
rc = virtqueue_add_sgs(vioch->vqueue, sgs, 1, 1, msg, GFP_ATOMIC);
if (rc) {
list_add(&msg->list, &vioch->free_list);
@@ -350,10 +399,8 @@ static void virtio_fetch_response(struct scmi_chan_info *cinfo,
{
struct scmi_vio_msg *msg = xfer->priv;
- if (msg) {
+ if (msg)
msg_fetch_response(msg->input, msg->rx_len, xfer);
- xfer->priv = NULL;
- }
}
static void virtio_fetch_notification(struct scmi_chan_info *cinfo,
@@ -361,11 +408,142 @@ static void virtio_fetch_notification(struct scmi_chan_info *cinfo,
{
struct scmi_vio_msg *msg = xfer->priv;
- if (msg) {
+ if (msg)
msg_fetch_notification(msg->input, msg->rx_len, max_len, xfer);
- xfer->priv = NULL;
+}
+
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE
+/**
+ * virtio_mark_txdone - Mark transmission done
+ *
+ * Free successfully completed polling transfer messages.
+ *
+ * @cinfo: SCMI channel info
+ * @ret: Transmission return code
+ * @xfer: Transfer descriptor
+ */
+static void virtio_mark_txdone(struct scmi_chan_info *cinfo, int ret,
+ struct scmi_xfer *xfer)
+{
+ unsigned long flags;
+ struct scmi_vio_channel *vioch = cinfo->transport_info;
+ struct scmi_vio_msg *msg = xfer->priv;
+
+ if (!msg)
+ return;
+
+ /* Is a successfully polling reply message still to be finalized ? */
+ spin_lock_irqsave(&msg->poll_lock, flags);
+ if (!ret && xfer->hdr.poll_completion && list_empty(&msg->list))
+ scmi_vio_feed_vq_tx(vioch, msg);
+ spin_unlock_irqrestore(&msg->poll_lock, flags);
+
+ xfer->priv = NULL;
+}
+
+/**
+ * virtio_poll_done - Provide polling support for VirtIO transport
+ *
+ * @cinfo: SCMI channel info
+ * @xfer: Reference to the transfer being poll for.
+ *
+ * VirtIO core provides a polling mechanism based only on last used indexes:
+ * this means that it is possible to poll the virtqueues waiting for something
+ * new to arrive from the host side but the only way to check if the freshly
+ * arrived buffer was what we were waiting for is to compare the newly arrived
+ * message descriptors with the one we are polling on.
+ *
+ * As a consequence it can happen to dequeue something different from the buffer
+ * we were poll-waiting for: if that is the case such early fetched buffers are
+ * then added to a the @pending_cmds_list list for later processing within the
+ * usual VirtIO callbacks; so, basically, once something new is spotted we
+ * proceed to de-queue all the freshly received used buffers until we found the
+ * one we were polling on, or we empty the virtqueue.
+ *
+ * Note that we do NOT suppress notification with VIRTQ_USED_F_NO_NOTIFY even
+ * when polling since such flag is per-virtqueues and we do not want to
+ * suppress notifications as a whole: so, if the message we are polling for is
+ * delivered via usual IRQs callbacks, it will be handled as such and the
+ * polling loop will be transparently terminated anyway.
+ *
+ * Return: True once polling has successfully completed.
+ */
+static bool virtio_poll_done(struct scmi_chan_info *cinfo,
+ struct scmi_xfer *xfer)
+{
+ bool ret;
+ unsigned long flags;
+ struct scmi_vio_msg *msg = xfer->priv;
+ struct scmi_vio_channel *vioch = cinfo->transport_info;
+
+ if (!msg)
+ return true;
+
+ /* Processed already by other polling on another CPU ? */
+ spin_lock_irqsave(&msg->poll_lock, flags);
+ if (msg->poll_idx == VIO_MSG_POLL_DONE) {
+ spin_unlock_irqrestore(&msg->poll_lock, flags);
+ return true;
}
+
+ /* Has cmdq index moved at all ? */
+ ret = virtqueue_poll(vioch->vqueue, msg->poll_idx);
+ spin_unlock_irqrestore(&msg->poll_lock, flags);
+ if (ret) {
+ struct scmi_vio_msg *next_msg;
+
+ spin_lock_irqsave(&vioch->lock, flags);
+ virtqueue_disable_cb(vioch->vqueue);
+
+ /*
+ * If something arrived we cannot be sure if it was the reply to
+ * the xfer we are polling for some other replies to other, even
+ * possibly non-polling, pending xfer: process all new messages
+ * till the polling-for message is found OR the vqueue is empty.
+ */
+ do {
+ unsigned int length;
+
+ next_msg = virtqueue_get_buf(vioch->vqueue, &length);
+ if (next_msg) {
+ next_msg->rx_len = length;
+ if (next_msg == msg) {
+ ret = true;
+ break;
+ }
+
+ list_add_tail(&next_msg->list,
+ &vioch->pending_cmds_list);
+ spin_lock(&next_msg->poll_lock);
+ next_msg->poll_idx = VIO_MSG_POLL_DONE;
+ spin_unlock(&next_msg->poll_lock);
+ ret = false;
+ }
+ } while (next_msg);
+
+ /*
+ * When the polling loop has successfully terminated simply
+ * restart the vqueue, no matter if something else was queued
+ * in the meantime, it will be served by normal IRQ/callback.
+ *
+ * If we emptied the vqueue but there's still no sign
+ * of the message we are polling for, update the polling
+ * index to the current vqueue head.
+ */
+ if (ret) {
+ virtqueue_enable_cb(vioch->vqueue);
+ } else {
+ spin_lock(&msg->poll_lock);
+ msg->poll_idx =
+ virtqueue_enable_cb_prepare(vioch->vqueue);
+ spin_unlock(&msg->poll_lock);
+ }
+ spin_unlock_irqrestore(&vioch->lock, flags);
+ }
+
+ return ret;
}
+#endif
static const struct scmi_transport_ops scmi_virtio_ops = {
.link_supplier = virtio_link_supplier,
@@ -376,6 +554,10 @@ static const struct scmi_transport_ops scmi_virtio_ops = {
.send_message = virtio_send_message,
.fetch_response = virtio_fetch_response,
.fetch_notification = virtio_fetch_notification,
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE
+ .mark_txdone = virtio_mark_txdone,
+ .poll_done = virtio_poll_done,
+#endif
};
static int scmi_vio_probe(struct virtio_device *vdev)
@@ -418,6 +600,9 @@ static int scmi_vio_probe(struct virtio_device *vdev)
spin_lock_init(&channels[i].lock);
spin_lock_init(&channels[i].ready_lock);
INIT_LIST_HEAD(&channels[i].free_list);
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE
+ INIT_LIST_HEAD(&channels[i].pending_cmds_list);
+#endif
channels[i].vqueue = vqs[i];
sz = virtqueue_get_vring_size(channels[i].vqueue);
@@ -506,4 +691,5 @@ const struct scmi_desc scmi_virtio_desc = {
.max_rx_timeout_ms = 60000, /* for non-realtime virtio devices */
.max_msg = 0, /* overridden by virtio_get_max_msg() */
.max_msg_size = VIRTIO_SCMI_MAX_MSG_SIZE,
+ .atomic_enabled = IS_ENABLED(CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE),
};
Add support for .mark_txdone and .poll_done transport operations to SCMI VirtIO transport as pre-requisites to enable atomic operations. Add a Kernel configuration option to enable SCMI VirtIO transport polling and atomic mode for selected SCMI transactions while leaving it default disabled. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Skalkin <igor.skalkin@opensynergy.com> Cc: Peter Hilber <peter.hilber@opensynergy.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> --- drivers/firmware/arm_scmi/Kconfig | 15 ++ drivers/firmware/arm_scmi/virtio.c | 212 +++++++++++++++++++++++++++-- 2 files changed, 214 insertions(+), 13 deletions(-)