diff mbox series

[v6,16/16] clk: scmi: Support atomic clock enable/disable API

Message ID 20211122230640.1345-17-cristian.marussi@arm.com (mailing list archive)
State New, archived
Headers show
Series Introduce atomic support for SCMI transports | expand

Commit Message

Cristian Marussi Nov. 22, 2021, 11:06 p.m. UTC
Support also atomic enable/disable clk_ops beside the bare non-atomic one
(sprepare/unprepare) when the underlying SCMI transport is configured to
support atomic transactions for synchronous commands.

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
---
V5 --> V6
- add concurrent availability of atomic and non atomic reqs
---
 drivers/clk/clk-scmi.c | 56 +++++++++++++++++++++++++++++++++++-------
 1 file changed, 47 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/clk-scmi.c b/drivers/clk/clk-scmi.c
index 1e357d364ca2..50033d873dde 100644
--- a/drivers/clk/clk-scmi.c
+++ b/drivers/clk/clk-scmi.c
@@ -88,21 +88,53 @@  static void scmi_clk_disable(struct clk_hw *hw)
 	scmi_proto_clk_ops->disable(clk->ph, clk->id);
 }
 
+static int scmi_clk_atomic_enable(struct clk_hw *hw)
+{
+	struct scmi_clk *clk = to_scmi_clk(hw);
+
+	return scmi_proto_clk_ops->enable_atomic(clk->ph, clk->id);
+}
+
+static void scmi_clk_atomic_disable(struct clk_hw *hw)
+{
+	struct scmi_clk *clk = to_scmi_clk(hw);
+
+	scmi_proto_clk_ops->disable_atomic(clk->ph, clk->id);
+}
+
+/*
+ * We can provide enable/disable atomic callbacks only if the underlying SCMI
+ * transport for an SCMI instance is configured to handle SCMI commands in an
+ * atomic manner.
+ *
+ * When no SCMI atomic transport support is available we instead provide only
+ * the prepare/unprepare API, as allowed by the clock framework when atomic
+ * calls are not available.
+ *
+ * Two distinct sets of clk_ops are provided since we could have multiple SCMI
+ * instances with different underlying transport quality, so they cannot be
+ * shared.
+ */
 static const struct clk_ops scmi_clk_ops = {
 	.recalc_rate = scmi_clk_recalc_rate,
 	.round_rate = scmi_clk_round_rate,
 	.set_rate = scmi_clk_set_rate,
-	/*
-	 * We can't provide enable/disable callback as we can't perform the same
-	 * in atomic context. Since the clock framework provides standard API
-	 * clk_prepare_enable that helps cases using clk_enable in non-atomic
-	 * context, it should be fine providing prepare/unprepare.
-	 */
 	.prepare = scmi_clk_enable,
 	.unprepare = scmi_clk_disable,
 };
 
-static int scmi_clk_ops_init(struct device *dev, struct scmi_clk *sclk)
+static const struct clk_ops scmi_atomic_clk_ops = {
+	.recalc_rate = scmi_clk_recalc_rate,
+	.round_rate = scmi_clk_round_rate,
+	.set_rate = scmi_clk_set_rate,
+	.prepare = scmi_clk_enable,
+	.unprepare = scmi_clk_disable,
+	.enable = scmi_clk_atomic_enable,
+	.disable = scmi_clk_atomic_disable,
+};
+
+static int scmi_clk_ops_init(struct device *dev, struct scmi_clk *sclk,
+			     const struct clk_ops *scmi_ops)
 {
 	int ret;
 	unsigned long min_rate, max_rate;
@@ -110,7 +142,7 @@  static int scmi_clk_ops_init(struct device *dev, struct scmi_clk *sclk)
 	struct clk_init_data init = {
 		.flags = CLK_GET_RATE_NOCACHE,
 		.num_parents = 0,
-		.ops = &scmi_clk_ops,
+		.ops = scmi_ops,
 		.name = sclk->info->name,
 	};
 
@@ -145,6 +177,7 @@  static int scmi_clocks_probe(struct scmi_device *sdev)
 	struct device_node *np = dev->of_node;
 	const struct scmi_handle *handle = sdev->handle;
 	struct scmi_protocol_handle *ph;
+	const struct clk_ops *scmi_ops;
 
 	if (!handle)
 		return -ENODEV;
@@ -168,6 +201,11 @@  static int scmi_clocks_probe(struct scmi_device *sdev)
 	clk_data->num = count;
 	hws = clk_data->hws;
 
+	if (handle->is_transport_atomic(handle))
+		scmi_ops = &scmi_atomic_clk_ops;
+	else
+		scmi_ops = &scmi_clk_ops;
+
 	for (idx = 0; idx < count; idx++) {
 		struct scmi_clk *sclk;
 
@@ -184,7 +222,7 @@  static int scmi_clocks_probe(struct scmi_device *sdev)
 		sclk->id = idx;
 		sclk->ph = ph;
 
-		err = scmi_clk_ops_init(dev, sclk);
+		err = scmi_clk_ops_init(dev, sclk, scmi_ops);
 		if (err) {
 			dev_err(dev, "failed to register clock %d\n", idx);
 			devm_kfree(dev, sclk);