diff mbox series

[v3,09/13] tty: serial: fsl_lpuart: add i.MXRT support

Message ID 20211125211443.1150135-10-Mr.Bossman075@gmail.com (mailing list archive)
State New, archived
Headers show
Series add initial support for the i.MXRTxxxx SoC family starting from i.IMXRT1050 SoC. | expand

Commit Message

Jesse Taube Nov. 25, 2021, 9:14 p.m. UTC 
From: Jesse Taube <mr.bossman075@gmail.com>

Add support for i.MXRT1050's uart.

Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
---
V1->V2:
* Nothing done
V2->V3:
* Rename imxrt to imxrt1050
---
 drivers/tty/serial/fsl_lpuart.c | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Fabio Estevam Nov. 28, 2021, 8:47 p.m. UTC | #1 
On Thu, Nov 25, 2021 at 6:15 PM Jesse Taube <mr.bossman075@gmail.com> wrote:
>
> From: Jesse Taube <mr.bossman075@gmail.com>
>
> Add support for i.MXRT1050's uart.
>
> Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>

Reviewed-by: Fabio Estevam <festevam@gmail.com>
diff mbox series

Patch

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index b1e7190ae483..884bc4e70d70 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -247,6 +247,7 @@  enum lpuart_type {
 	LS1028A_LPUART,
 	IMX7ULP_LPUART,
 	IMX8QXP_LPUART,
+	IMXRT1050_LPUART,
 };
 
 struct lpuart_port {
@@ -310,6 +311,11 @@  static struct lpuart_soc_data imx8qxp_data = {
 	.iotype = UPIO_MEM32,
 	.reg_off = IMX_REG_OFF,
 };
+static struct lpuart_soc_data imxrt1050_data = {
+	.devtype = IMXRT1050_LPUART,
+	.iotype = UPIO_MEM32,
+	.reg_off = IMX_REG_OFF,
+};
 
 static const struct of_device_id lpuart_dt_ids[] = {
 	{ .compatible = "fsl,vf610-lpuart",	.data = &vf_data, },
@@ -317,6 +323,7 @@  static const struct of_device_id lpuart_dt_ids[] = {
 	{ .compatible = "fsl,ls1028a-lpuart",	.data = &ls1028a_data, },
 	{ .compatible = "fsl,imx7ulp-lpuart",	.data = &imx7ulp_data, },
 	{ .compatible = "fsl,imx8qxp-lpuart",	.data = &imx8qxp_data, },
+	{ .compatible = "fsl,imxrt1050-lpuart",	.data = &imxrt1050_data},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
@@ -2625,6 +2632,7 @@  OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup);
 OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup);
 OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1028a-lpuart", ls1028a_early_console_setup);
 OF_EARLYCON_DECLARE(lpuart32, "fsl,imx7ulp-lpuart", lpuart32_imx_early_console_setup);
+OF_EARLYCON_DECLARE(lpuart32, "fsl,imxrt1050-lpuart", lpuart32_imx_early_console_setup);
 EARLYCON_DECLARE(lpuart, lpuart_early_console_setup);
 EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup);