diff mbox series

[6/8] tty: serial: Make SERIAL_SAMSUNG=y impossible when EXYNOS_USI_V2=m

Message ID 20211127223253.19098-7-semen.protsenko@linaro.org (mailing list archive)
State New, archived
Headers show
Series soc: samsung: Add USIv2 driver | expand

Commit Message

Sam Protsenko Nov. 27, 2021, 10:32 p.m. UTC
When UART is encapsulated in USIv2 block (e.g. in Exynos850), USIv2
driver must be loaded first, as it's preparing USI hardware for
particular protocol use. Make it impossible for Samsung serial driver to
be built-in when USIv2 driver is built as a module, to prevent incorrect
booting order for those drivers.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
---
 drivers/tty/serial/Kconfig | 1 +
 1 file changed, 1 insertion(+)

Comments

Greg KH Nov. 28, 2021, 2:27 p.m. UTC | #1
On Sun, Nov 28, 2021 at 12:32:51AM +0200, Sam Protsenko wrote:
> When UART is encapsulated in USIv2 block (e.g. in Exynos850), USIv2
> driver must be loaded first, as it's preparing USI hardware for
> particular protocol use. Make it impossible for Samsung serial driver to
> be built-in when USIv2 driver is built as a module, to prevent incorrect
> booting order for those drivers.
> 
> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
> ---
>  drivers/tty/serial/Kconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 0e5ccb25bdb1..47bc24e74041 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -237,6 +237,7 @@ config SERIAL_CLPS711X_CONSOLE
>  config SERIAL_SAMSUNG
>  	tristate "Samsung SoC serial support"
>  	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || COMPILE_TEST
> +	depends on EXYNOS_USI_V2 || !EXYNOS_USI_V2

That's odd, and is not going to help if everything is built as a module
and loaded that way.

This needs to be done properly in code to handle the issues if the
"wrong" code is loaded first.  Please trigger off of the hardware type
correctly so you don't have to worry about this at all.

thanks,

greg k-h
Sam Protsenko Nov. 28, 2021, 11:54 p.m. UTC | #2
On Sun, 28 Nov 2021 at 16:27, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Sun, Nov 28, 2021 at 12:32:51AM +0200, Sam Protsenko wrote:
> > When UART is encapsulated in USIv2 block (e.g. in Exynos850), USIv2
> > driver must be loaded first, as it's preparing USI hardware for
> > particular protocol use. Make it impossible for Samsung serial driver to
> > be built-in when USIv2 driver is built as a module, to prevent incorrect
> > booting order for those drivers.
> >
> > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
> > ---
> >  drivers/tty/serial/Kconfig | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> > index 0e5ccb25bdb1..47bc24e74041 100644
> > --- a/drivers/tty/serial/Kconfig
> > +++ b/drivers/tty/serial/Kconfig
> > @@ -237,6 +237,7 @@ config SERIAL_CLPS711X_CONSOLE
> >  config SERIAL_SAMSUNG
> >       tristate "Samsung SoC serial support"
> >       depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || COMPILE_TEST
> > +     depends on EXYNOS_USI_V2 || !EXYNOS_USI_V2
>
> That's odd, and is not going to help if everything is built as a module
> and loaded that way.
>
> This needs to be done properly in code to handle the issues if the
> "wrong" code is loaded first.  Please trigger off of the hardware type
> correctly so you don't have to worry about this at all.
>

You are right. The only thing that should be done is "__init" should
be removed from s3c24xx_serial_console_setup() and
s3c24xx_serial_get_options() functions. Because in case when USIv2
driver instantiates the serial driver via of_platform_populate(), when
USI_V2=m and SERIAL_SAMSUNG=y, those symbols will be thrown away
already. And of course "[PATCH 5/8] tty: serial: samsung: Enable
console as module" is needed as well. Correct init order (USI vs
serial) is already ensured by embedding serial node in USI node (as a
child node).

We'll still have some weird init order in that case (USI_V2=m and
SERIAL_SAMSUNG=y), like doing serial console init first (and
earlycon), then registering USI driver as a module (reconfiguring USI
IP-core), and then doing serial probe. But at least that doesn't crash
and works fine (only causing some delay once, in the middle of dmesg
output). But I guess that would be a problem of people who decided to
go with such weird config.

Bottom line is, this patch is not needed. I'll re-send v2 soon,
excluding it from there, and will also add that mentioned "__init"
removal.

Thanks for review!

> thanks,
>
> greg k-h
diff mbox series

Patch

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 0e5ccb25bdb1..47bc24e74041 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -237,6 +237,7 @@  config SERIAL_CLPS711X_CONSOLE
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
 	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || COMPILE_TEST
+	depends on EXYNOS_USI_V2 || !EXYNOS_USI_V2
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung