deleted file mode 100644
@@ -1,27 +0,0 @@
-* Broadcom NS2 PCIe PHY binding document
-
-Required bus properties:
-- reg: MDIO Bus number for the MDIO interface
-- #address-cells: must be 1
-- #size-cells: must be 0
-
-Required PHY properties:
-- compatible: should be "brcm,ns2-pcie-phy"
-- reg: MDIO Phy ID for the MDIO interface
-- #phy-cells: must be 0
-
-This is a child bus node of "brcm,mdio-mux-iproc" node.
-
-Example:
-
-mdio@0 {
- reg = <0x0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pci_phy0: pci-phy@0 {
- compatible = "brcm,ns2-pcie-phy";
- reg = <0x0>;
- #phy-cells = <0>;
- };
-};
new file mode 100644
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,ns2-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom NS2 PCIe PHY binding document
+
+maintainers:
+ - Ray Jui <ray.jui@broadcom.com>
+ - Scott Branden <scott.branden@broadcom.com>
+
+properties:
+ compatible:
+ const: brcm,ns2-pcie-phy
+
+ reg:
+ maxItems: 1
+
+ "#phy-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pci-phy@0 {
+ compatible = "brcm,ns2-pcie-phy";
+ reg = <0x0>;
+ #phy-cells = <0>;
+ };
+ };
Convert the Broadcom Northstar 2 PCIe PHY Device Tree binding to YAML and rename it accordingly in the process since it had nothing to do with a MDIO mux on the PCI(e) bus. This is a pre-requisite to updating another binding file to YAML. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- .../bindings/phy/brcm,mdio-mux-bus-pci.txt | 27 ------------ .../bindings/phy/brcm,ns2-pcie-phy.yaml | 41 +++++++++++++++++++ 2 files changed, 41 insertions(+), 27 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt create mode 100644 Documentation/devicetree/bindings/phy/brcm,ns2-pcie-phy.yaml