diff mbox series

[v2,7/8] arm64: dts: ls1028a-qds: enable lpuart1

Message ID 20211204001718.8511-8-leoyang.li@nxp.com (mailing list archive)
State New, archived
Headers show
Series ls1028a device tree update | expand

Commit Message

Leo Li Dec. 4, 2021, 12:17 a.m. UTC 
From: Vabhav Sharma <vabhav.sharma@nxp.com>

LPUART nodes by default are disabled in LS1028A device
tree, Enabling LPUART1 node.

Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Vladimir Oltean Dec. 4, 2021, 12:01 p.m. UTC | #1 
On Fri, Dec 03, 2021 at 06:17:17PM -0600, Li Yang wrote:
> From: Vabhav Sharma <vabhav.sharma@nxp.com>
> 
> LPUART nodes by default are disabled in LS1028A device
> tree, Enabling LPUART1 node.
> 
> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
> Acked-by: Fugang Duan <fugang.duan@nxp.com>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>

This needs your Signed-off-by tag too, since you're carrying the patch.

> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> index baa1cc9b9835..782853a449cc 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> @@ -336,6 +336,10 @@ &lpuart0 {
>  	status = "okay";
>  };
>  
> +&lpuart1 {
> +	status = "okay";
> +};
> +
>  &sai1 {
>  	status = "okay";
>  };
> -- 
> 2.25.1
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index baa1cc9b9835..782853a449cc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -336,6 +336,10 @@  &lpuart0 {
 	status = "okay";
 };
 
+&lpuart1 {
+	status = "okay";
+};
+
 &sai1 {
 	status = "okay";
 };