diff mbox series

[RFC,devicetree,04/10] arm64: dts: ls1043a: rename the "interrupt-map" of the extirq node to "fsl, extirq-map"

Message ID 20211214013800.2703568-5-vladimir.oltean@nxp.com (mailing list archive)
State New, archived
Headers show
Series Do something about ls-extirq interrupt-map breakage | expand

Commit Message

Vladimir Oltean Dec. 14, 2021, 1:37 a.m. UTC 
In the discussions here:
https://lore.kernel.org/all/CAMuHMdXM34nNz1nfowNqDvdsdg+d69Bo3_ufs6fbcq65iYd5-A@mail.gmail.com/T/#m3449390080c5a0c8f59b8f8286a87e31e093b98b
Marc Zyngier points out that the ls-extirq driver should have never used
the "interrupt-map" keyword for mapping its channels to GIC interrupts.

This change modifies the device trees for the LS1043A to use a
driver-specific OF property for that purpose. The change is intended to
target stable kernels, to accelerate the conversion and ultimate removal
of the improperly used "interrupt-map" property.

Note that "interrupt-map-mask" isn't needed now (nor was it needed
before, it was just there to keep an apparent compatibility in form with
the reserved "interrupt-map" property). So delete it.

Fixes: 3f8c61a567eb ("arm64: dts: ls1043a: add DT node for external interrupt lines")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 01b01e320411..62958b784171 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -322,7 +322,7 @@  extirq: interrupt-controller@1ac {
 				#address-cells = <0>;
 				interrupt-controller;
 				reg = <0x1ac 4>;
-				interrupt-map =
+				fsl,extirq-map =
 					<0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 					<1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
 					<2 0 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
@@ -335,7 +335,6 @@  extirq: interrupt-controller@1ac {
 					<9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
 					<10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
 					<11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-map-mask = <0xffffffff 0x0>;
 			};
 		};