diff mbox series

[v3,09/10] arm64: dts: lx2162a-qds: support SD UHS-I and eMMC HS400 modes

Message ID 20211214072342.22692-10-leoyang.li@nxp.com (mailing list archive)
State New, archived
Headers show
Series lx216x DTS updates | expand

Commit Message

Leo Li Dec. 14, 2021, 7:23 a.m. UTC 
From: Yangbo Lu <yangbo.lu@nxp.com>

The default NXP SDHC adapter cards for LX2162AQDS are SD 2.0/3.0
adapter card for eSDHC1, and eMMC 5.1 adapter card for eSDHC2.
Add speed modes properties supported by the two adapters in device
tree node.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Shawn Guo Dec. 16, 2021, 9:29 a.m. UTC | #1 
On Tue, Dec 14, 2021 at 01:23:41AM -0600, Li Yang wrote:
> From: Yangbo Lu <yangbo.lu@nxp.com>
> 
> The default NXP SDHC adapter cards for LX2162AQDS are SD 2.0/3.0
> adapter card for eSDHC1, and eMMC 5.1 adapter card for eSDHC2.
> Add speed modes properties supported by the two adapters in device
> tree node.
> 
> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
> Signed-off-by: Li Yang <leoyang.li@nxp.com>

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
index 8e1b7bff64a5..a2452efd2532 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
@@ -226,10 +226,17 @@  &emdio2 {
 };
 
 &esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
 	status = "okay";
 };
 
 &esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
 	status = "okay";
 };