Message ID | 20211219224215.1043447-1-festevam@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | ARM: dts: imx6qdl-udoo: Properly describe the SD card detect | expand |
On Sun, Dec 19, 2021 at 07:42:15PM -0300, Fabio Estevam wrote: > GPIO7_IO00 is used as SD card detect. > > Properly describe this in the devicetree. > > Fixes: 40cdaa542cf0 ("ARM: dts: imx6q-udoo: Add initial board support") > Signed-off-by: Fabio Estevam <festevam@gmail.com> Applied, thanks!
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index d07d8f83456d..ccfa8e320be6 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -5,6 +5,8 @@ * Author: Fabio Estevam <fabio.estevam@freescale.com> */ +#include <dt-bindings/gpio/gpio.h> + / { aliases { backlight = &backlight; @@ -226,6 +228,7 @@ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 >; }; @@ -304,7 +307,7 @@ &usbotg { &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - non-removable; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; status = "okay"; };
GPIO7_IO00 is used as SD card detect. Properly describe this in the devicetree. Fixes: 40cdaa542cf0 ("ARM: dts: imx6q-udoo: Add initial board support") Signed-off-by: Fabio Estevam <festevam@gmail.com> --- arch/arm/boot/dts/imx6qdl-udoo.dtsi | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)