| Message ID | 20211224142917.6966-10-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | None | expand |
On 12/24/2021 06:29, Lad Prabhakar wrote: > platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static > allocation of IRQ resources in DT core code, this causes an issue > when using hierarchical interrupt domains using "interrupts" property > in the node as this bypasses the hierarchical setup and messes up the > irq chaining. > > In preparation for removal of static setup of IRQ resource from DT core > code use platform_get_irq(). > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index 5fb0e84f7fd1..6471a54b616b 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -804,7 +804,7 @@ static struct uart_driver bcm_uart_driver = { */ static int bcm_uart_probe(struct platform_device *pdev) { - struct resource *res_mem, *res_irq; + struct resource *res_mem; struct uart_port *port; struct clk *clk; int ret; @@ -833,9 +833,10 @@ static int bcm_uart_probe(struct platform_device *pdev) if (IS_ERR(port->membase)) return PTR_ERR(port->membase); - res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res_irq) - return -ENODEV; + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret; + port->irq = ret; clk = clk_get(&pdev->dev, "refclk"); if (IS_ERR(clk) && pdev->dev.of_node) @@ -845,7 +846,6 @@ static int bcm_uart_probe(struct platform_device *pdev) return -ENODEV; port->iotype = UPIO_MEM; - port->irq = res_irq->start; port->ops = &bcm_uart_ops; port->flags = UPF_BOOT_AUTOCONF; port->dev = &pdev->dev;
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> --- drivers/tty/serial/bcm63xx_uart.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)