@@ -29,6 +29,27 @@ fin_pll: xxti {
#clock-cells = <0>;
};
+ ioclk_pcm: clock-pcm-ext {
+ compatible = "fixed-clock";
+ clock-frequency = <2048000>;
+ clock-output-names = "ioclk_pcm_extclk";
+ #clock-cells = <0>;
+ };
+
+ ioclk_i2s: clock-i2s-cd {
+ compatible = "fixed-clock";
+ clock-frequency = <147456000>;
+ clock-output-names = "ioclk_i2s_cdclk";
+ #clock-cells = <0>;
+ };
+
+ ioclk_spdif: clock-spdif-ext {
+ compatible = "fixed-clock";
+ clock-frequency = <49152000>;
+ clock-output-names = "ioclk_spdif_extclk";
+ #clock-cells = <0>;
+ };
+
xrtcxti: xrtcxti {
compatible = "fixed-clock";
clock-frequency = <32768>;
@@ -113,78 +113,206 @@ clock_top: clock-controller@10010000 {
compatible = "samsung,exynos5260-clock-top";
reg = <0x10010000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&clock_mif MIF_DOUT_MEM_PLL>,
+ <&clock_mif MIF_DOUT_BUS_PLL>,
+ <&clock_mif MIF_DOUT_MEDIA_PLL>;
+ clock-names = "fin_pll",
+ "dout_mem_pll",
+ "dout_bus_pll",
+ "dout_media_pll";
};
clock_peri: clock-controller@10200000 {
compatible = "samsung,exynos5260-clock-peri";
reg = <0x10200000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&ioclk_pcm>,
+ <&ioclk_i2s>,
+ <&ioclk_spdif>,
+ <&fin_pll>,
+ <&clock_top TOP_DOUT_ACLK_PERI_66>,
+ <&clock_top TOP_DOUT_SCLK_PERI_UART0>,
+ <&clock_top TOP_DOUT_SCLK_PERI_UART1>,
+ <&clock_top TOP_DOUT_SCLK_PERI_UART2>,
+ <&clock_top TOP_DOUT_SCLK_PERI_SPI0_B>,
+ <&clock_top TOP_DOUT_SCLK_PERI_SPI1_B>,
+ <&clock_top TOP_DOUT_SCLK_PERI_SPI2_B>,
+ <&clock_top TOP_DOUT_ACLK_PERI_AUD>;
+ clock-names = "fin_pll",
+ "ioclk_pcm_extclk",
+ "ioclk_i2s_cdclk",
+ "ioclk_spdif_extclk",
+ "phyclk_hdmi_phy_ref_cko",
+ "dout_aclk_peri_66",
+ "dout_sclk_peri_uart0",
+ "dout_sclk_peri_uart1",
+ "dout_sclk_peri_uart2",
+ "dout_sclk_peri_spi0_b",
+ "dout_sclk_peri_spi1_b",
+ "dout_sclk_peri_spi2_b",
+ "dout_aclk_peri_aud";
};
clock_egl: clock-controller@10600000 {
compatible = "samsung,exynos5260-clock-egl";
reg = <0x10600000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&clock_mif MIF_DOUT_BUS_PLL>;
+ clock-names = "fin_pll",
+ "dout_bus_pll";
};
clock_kfc: clock-controller@10700000 {
compatible = "samsung,exynos5260-clock-kfc";
reg = <0x10700000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&clock_mif MIF_DOUT_MEDIA_PLL>;
+ clock-names = "fin_pll",
+ "dout_media_pll";
};
clock_g2d: clock-controller@10a00000 {
compatible = "samsung,exynos5260-clock-g2d";
reg = <0x10A00000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&clock_top TOP_DOUT_ACLK_G2D_333>;
+ clock-names = "fin_pll",
+ "dout_aclk_g2d_333";
};
clock_mif: clock-controller@10ce0000 {
compatible = "samsung,exynos5260-clock-mif";
reg = <0x10CE0000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>;
+ clock-names = "fin_pll";
};
clock_mfc: clock-controller@11090000 {
compatible = "samsung,exynos5260-clock-mfc";
reg = <0x11090000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&clock_top TOP_DOUT_ACLK_MFC_333>;
+ clock-names = "fin_pll",
+ "dout_aclk_mfc_333";
};
clock_g3d: clock-controller@11830000 {
compatible = "samsung,exynos5260-clock-g3d";
reg = <0x11830000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>;
+ clock-names = "fin_pll";
};
clock_fsys: clock-controller@122e0000 {
compatible = "samsung,exynos5260-clock-fsys";
reg = <0x122E0000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&clock_top TOP_DOUT_ACLK_FSYS_200>;
+ clock-names = "fin_pll",
+ "phyclk_usbhost20_phy_phyclock",
+ "phyclk_usbhost20_phy_freeclk",
+ "phyclk_usbhost20_phy_clk48mohci",
+ "phyclk_usbdrd30_udrd30_pipe_pclk",
+ "phyclk_usbdrd30_udrd30_phyclock",
+ "dout_aclk_fsys_200";
};
clock_aud: clock-controller@128c0000 {
compatible = "samsung,exynos5260-clock-aud";
reg = <0x128C0000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&clock_top TOP_FOUT_AUD_PLL>,
+ <&ioclk_i2s>,
+ <&ioclk_pcm>;
+ clock-names = "fin_pll",
+ "fout_aud_pll",
+ "ioclk_i2s_cdclk",
+ "ioclk_pcm_extclk";
};
clock_isp: clock-controller@133c0000 {
compatible = "samsung,exynos5260-clock-isp";
reg = <0x133C0000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&clock_top TOP_DOUT_ACLK_ISP1_266>,
+ <&clock_top TOP_DOUT_ACLK_ISP1_400>,
+ <&clock_top TOP_MOUT_ACLK_ISP1_266>;
+ clock-names = "fin_pll",
+ "dout_aclk_isp1_266",
+ "dout_aclk_isp1_400",
+ "mout_aclk_isp1_266";
};
clock_gscl: clock-controller@13f00000 {
compatible = "samsung,exynos5260-clock-gscl";
reg = <0x13F00000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&clock_top TOP_DOUT_ACLK_GSCL_400>,
+ <&clock_top TOP_DOUT_ACLK_GSCL_333>;
+ clock-names = "fin_pll",
+ "dout_aclk_gscl_400",
+ "dout_aclk_gscl_333";
};
clock_disp: clock-controller@14550000 {
compatible = "samsung,exynos5260-clock-disp";
reg = <0x14550000 0x10000>;
#clock-cells = <1>;
+ clocks = <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&fin_pll>,
+ <&ioclk_spdif>,
+ <&clock_top TOP_DOUT_ACLK_PERI_AUD>,
+ <&clock_top TOP_DOUT_ACLK_DISP_222>,
+ <&clock_top TOP_DOUT_SCLK_DISP_PIXEL>,
+ <&clock_top TOP_DOUT_ACLK_DISP_333>;
+ clock-names = "fin_pll",
+ "phyclk_dptx_phy_ch3_txd_clk",
+ "phyclk_dptx_phy_ch2_txd_clk",
+ "phyclk_dptx_phy_ch1_txd_clk",
+ "phyclk_dptx_phy_ch0_txd_clk",
+ "phyclk_hdmi_phy_tmds_clko",
+ "phyclk_hdmi_phy_ref_clko",
+ "phyclk_hdmi_phy_pixel_clko",
+ "phyclk_hdmi_link_o_tmds_clkhi",
+ "phyclk_mipi_dphy_4l_m_txbyte_clkhs",
+ "phyclk_dptx_phy_o_ref_clk_24m",
+ "phyclk_dptx_phy_clk_div2",
+ "phyclk_mipi_dphy_4l_m_rxclkesc0",
+ "phyclk_hdmi_phy_ref_cko",
+ "ioclk_spdif_extclk",
+ "dout_aclk_peri_aud",
+ "dout_aclk_disp_222",
+ "dout_sclk_disp_pixel",
+ "dout_aclk_disp_333";
};
gic: interrupt-controller@10481000 {
Exynos5260 bindings require to feed clock controllers with certain clock inputs. The IO clocks are expected to be provided by the board. The PHY clocks are usually followed by mux which can choose between the PHY clock and main 24 MHz oscillator, so skip defining them and just use the latter one. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- arch/arm/boot/dts/exynos5260-xyref5260.dts | 21 ++++ arch/arm/boot/dts/exynos5260.dtsi | 128 +++++++++++++++++++++ 2 files changed, 149 insertions(+)