@@ -20,9 +20,9 @@ if NET_VENDOR_XSCALE
config IXP4XX_ETH
tristate "Intel IXP4xx Ethernet support"
- depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
+ depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR && OF
select PHYLIB
- select OF_MDIO if OF
+ select OF_MDIO
select NET_PTP_CLASSIFY
help
Say Y here if you want to use built-in Ethernet ports
@@ -30,7 +30,6 @@
#include <linux/of.h>
#include <linux/of_mdio.h>
#include <linux/phy.h>
-#include <linux/platform_data/eth_ixp4xx.h>
#include <linux/platform_device.h>
#include <linux/ptp_classify.h>
#include <linux/slab.h>
@@ -38,6 +37,11 @@
#include <linux/soc/ixp4xx/npe.h>
#include <linux/soc/ixp4xx/qmgr.h>
#include <linux/soc/ixp4xx/cpu.h>
+#include <linux/types.h>
+
+#define IXP4XX_ETH_NPEA 0x00
+#define IXP4XX_ETH_NPEB 0x10
+#define IXP4XX_ETH_NPEC 0x20
#include "ixp46x_ts.h"
@@ -147,6 +151,16 @@ typedef void buffer_t;
#define free_buffer_irq kfree
#endif
+/* Information about built-in Ethernet MAC interfaces */
+struct eth_plat_info {
+ u8 phy; /* MII PHY ID, 0 - 31 */
+ u8 rxq; /* configurable, currently 0 - 31 only */
+ u8 txreadyq;
+ u8 hwaddr[6];
+ u8 npe; /* NPE instance used by this interface */
+ bool has_mdio; /* If this instance has an MDIO bus */
+};
+
struct eth_regs {
u32 tx_control[2], __res1[2]; /* 000 */
u32 rx_control[2], __res2[2]; /* 010 */
@@ -1366,7 +1380,6 @@ static const struct net_device_ops ixp4xx_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-#ifdef CONFIG_OF
static struct eth_plat_info *ixp4xx_of_get_platdata(struct device *dev)
{
struct device_node *np = dev->of_node;
@@ -1417,12 +1430,6 @@ static struct eth_plat_info *ixp4xx_of_get_platdata(struct device *dev)
return plat;
}
-#else
-static struct eth_plat_info *ixp4xx_of_get_platdata(struct device *dev)
-{
- return NULL;
-}
-#endif
static int ixp4xx_eth_probe(struct platform_device *pdev)
{
@@ -1434,49 +1441,9 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
struct port *port;
int err;
- if (np) {
- plat = ixp4xx_of_get_platdata(dev);
- if (!plat)
- return -ENODEV;
- } else {
- plat = dev_get_platdata(dev);
- if (!plat)
- return -ENODEV;
- plat->npe = pdev->id;
- switch (plat->npe) {
- case IXP4XX_ETH_NPEA:
- /* If the MDIO bus is not up yet, defer probe */
- break;
- case IXP4XX_ETH_NPEB:
- /* On all except IXP43x, NPE-B is used for the MDIO bus.
- * If there is no NPE-B in the feature set, bail out,
- * else we have the MDIO bus here.
- */
- if (!cpu_is_ixp43x()) {
- if (!(ixp4xx_read_feature_bits() &
- IXP4XX_FEATURE_NPEB_ETH0))
- return -ENODEV;
- /* Else register the MDIO bus on NPE-B */
- plat->has_mdio = true;
- }
- break;
- case IXP4XX_ETH_NPEC:
- /* IXP43x lacks NPE-B and uses NPE-C for the MDIO bus
- * access, if there is no NPE-C, no bus, nothing works,
- * so bail out.
- */
- if (cpu_is_ixp43x()) {
- if (!(ixp4xx_read_feature_bits() &
- IXP4XX_FEATURE_NPEC_ETH))
- return -ENODEV;
- /* Else register the MDIO bus on NPE-B */
- plat->has_mdio = true;
- }
- break;
- default:
- return -ENODEV;
- }
- }
+ plat = ixp4xx_of_get_platdata(dev);
+ if (!plat)
+ return -ENODEV;
if (!(ndev = devm_alloc_etherdev(dev, sizeof(struct port))))
return -ENOMEM;
deleted file mode 100644
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PLATFORM_DATA_ETH_IXP4XX
-#define __PLATFORM_DATA_ETH_IXP4XX
-
-#include <linux/types.h>
-
-#define IXP4XX_ETH_NPEA 0x00
-#define IXP4XX_ETH_NPEB 0x10
-#define IXP4XX_ETH_NPEC 0x20
-
-/* Information about built-in Ethernet MAC interfaces */
-struct eth_plat_info {
- u8 phy; /* MII PHY ID, 0 - 31 */
- u8 rxq; /* configurable, currently 0 - 31 only */
- u8 txreadyq;
- u8 hwaddr[6];
- u8 npe; /* NPE instance used by this interface */
- bool has_mdio; /* If this instance has an MDIO bus */
-};
-
-#endif
All IXP4xx platforms are converted to device tree, the platform data path is no longer used. Drop the code and custom include, confine the driver in its own file. Depend on OF and remove ifdefs around this, as we are all probing from OF now. Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- Network maintainers: I'm looking for an ACK to take this change through ARM SoC along with other changes removing these accessor functions. --- drivers/net/ethernet/xscale/Kconfig | 4 +- drivers/net/ethernet/xscale/ixp4xx_eth.c | 69 +++++++----------------- include/linux/platform_data/eth_ixp4xx.h | 21 -------- 3 files changed, 20 insertions(+), 74 deletions(-) delete mode 100644 include/linux/platform_data/eth_ixp4xx.h