deleted file mode 100644
@@ -1,60 +0,0 @@
-Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
-
-This file documents the properties in addition to those available in
-the MTD NAND bindings.
-
-Required properties:
-- compatible : contains one of:
- - "amlogic,meson-gxl-nfc"
- - "amlogic,meson-axg-nfc"
-- clocks :
- A list of phandle + clock-specifier pairs for the clocks listed
- in clock-names.
-
-- clock-names: Should contain the following:
- "core" - NFC module gate clock
- "device" - device clock from eMMC sub clock controller
- "rx" - rx clock phase
- "tx" - tx clock phase
-
-- amlogic,mmc-syscon : Required for NAND clocks, it's shared with SD/eMMC
- controller port C
-
-Optional children nodes:
-Children nodes represent the available nand chips.
-
-Other properties:
-see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
-
-Example demonstrate on AXG SoC:
-
- sd_emmc_c_clkc: mmc@7000 {
- compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
- reg = <0x0 0x7000 0x0 0x800>;
- };
-
- nand-controller@7800 {
- compatible = "amlogic,meson-axg-nfc";
- reg = <0x0 0x7800 0x0 0x100>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
-
- clocks = <&clkc CLKID_SD_EMMC_C>,
- <&sd_emmc_c_clkc CLKID_MMC_DIV>,
- <&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>,
- <&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>;
- clock-names = "core", "device", "rx", "tx";
- amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&nand_pins>;
-
- nand@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- nand-on-flash-bbt;
- };
- };
new file mode 100644
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,mmc-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
+
+maintainers:
+ - liang.yang@amlogic.com
+
+properties:
+ compatible:
+ enum:
+ - "amlogic,meson-gxl-nfc"
+ - "amlogic,meson-axg-nfc"
+
+ reg:
+ maxItems: 2
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: "core", "device"
+
+ "#clock-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ nand-controller@7800 {
+ compatible = "amlogic,meson-axg-nfc";
+ reg = <0x0 0x7800 0x0 0x100>,
+ <0x0 0x7000 0x0 0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
+
+ clocks = <&clkc CLKID_SD_EMMC_C>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "device";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins>;
+
+ nand@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-on-flash-bbt;
+ };
+ };
+
+...
\ No newline at end of file
convert txt to yaml and refine the meson NFC clock document. Signed-off-by: Liang Yang <liang.yang@amlogic.com> --- .../bindings/mtd/amlogic,meson-nand.txt | 60 ---------------- .../bindings/mtd/amlogic,meson-nand.yaml | 70 +++++++++++++++++++ 2 files changed, 70 insertions(+), 60 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt create mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml