| Message ID | 20220203021736.13434-4-samuel@sholland.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | clk: sunxi-ng: Add a RTC CCU driver | expand |
On Wed, Feb 02, 2022 at 08:17:33PM -0600, Samuel Holland wrote: > H6 and newer variants of the RTC hardware have a bus clock gate in the > PRCM CCU. This was not known at the time H6 support was added, so it was > not included in the H6 RTC binding, nor in the H6 PRCM CCU driver. Now > that this clock gate is documented, it is included in the A100 and D1 > PRCM CCU drivers. Therefore, the RTC driver needs to have a consumer for > the clock gate to prevent Linux from disabling it. > > Patch-changes: 3 > - New patch for compatibility with new CCU drivers Did that creep in? Shouldn't it be in your changelog? With that fixed, Reviewed-by: Maxime Ripard <maxime@cerno.tech> Maxime
diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c index 711832c758ae..d5a86cbb2e94 100644 --- a/drivers/rtc/rtc-sun6i.c +++ b/drivers/rtc/rtc-sun6i.c @@ -668,11 +668,35 @@ static int sun6i_rtc_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(sun6i_rtc_pm_ops, sun6i_rtc_suspend, sun6i_rtc_resume); +static void sun6i_rtc_bus_clk_cleanup(void *data) +{ + struct clk *bus_clk = data; + + clk_disable_unprepare(bus_clk); +} + static int sun6i_rtc_probe(struct platform_device *pdev) { struct sun6i_rtc_dev *chip = sun6i_rtc; + struct device *dev = &pdev->dev; + struct clk *bus_clk; int ret; + bus_clk = devm_clk_get_optional(dev, "bus"); + if (IS_ERR(bus_clk)) + return PTR_ERR(bus_clk); + + if (bus_clk) { + ret = clk_prepare_enable(bus_clk); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, sun6i_rtc_bus_clk_cleanup, + bus_clk); + if (ret) + return ret; + } + if (!chip) { chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); if (!chip)
H6 and newer variants of the RTC hardware have a bus clock gate in the PRCM CCU. This was not known at the time H6 support was added, so it was not included in the H6 RTC binding, nor in the H6 PRCM CCU driver. Now that this clock gate is documented, it is included in the A100 and D1 PRCM CCU drivers. Therefore, the RTC driver needs to have a consumer for the clock gate to prevent Linux from disabling it. Patch-changes: 3 - New patch for compatibility with new CCU drivers Signed-off-by: Samuel Holland <samuel@sholland.org> --- (no changes since v1) drivers/rtc/rtc-sun6i.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)