diff mbox series

[08/16] ARM: dts: stm32: keep uart nodes behavior on stm32mp1-microdev2.0

Message ID 20220203171114.10888-9-erwan.leray@foss.st.com (mailing list archive)
State New, archived
Headers show
Series STM32 configure UART nodes for DMA | expand

Commit Message

Erwan LE RAY Feb. 3, 2022, 5:11 p.m. UTC 
DMA configuration is added to uart nodes in stm32mp15x device tree.
Delete uart4 DMA property in stm32mp1-microdev2.0 board device tree
to keep console in irq mode, as DMA support for console has been
removed from the driver by commit e359b4411c28 ("serial: stm32: fix
threaded interrupt handling").
Delete also uart8 DMA property to keep current behavior.

Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
index 7a75868164dc..b9d0d3d6ad15 100644
--- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
@@ -44,6 +44,8 @@ 
 	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-1 = <&uart4_sleep_pins_a>;
 	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -51,5 +53,7 @@ 
 &uart8 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart8_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };