@@ -305,7 +305,7 @@ sgpio0: gpio@61101036c {
pinctrl-names = "default";
resets = <&reset 0>;
reset-names = "switch";
- reg = <0x6 0x1101036c 0x100>;
+ reg = <0x6 0x1101036c 0x118>;
sgpio_in0: gpio@0 {
compatible = "microchip,sparx5-sgpio-bank";
reg = <0>;
@@ -335,7 +335,7 @@ sgpio1: gpio@611010484 {
pinctrl-names = "default";
resets = <&reset 0>;
reset-names = "switch";
- reg = <0x6 0x11010484 0x100>;
+ reg = <0x6 0x11010484 0x118>;
sgpio_in1: gpio@0 {
compatible = "microchip,sparx5-sgpio-bank";
reg = <0>;
@@ -365,7 +365,7 @@ sgpio2: gpio@61101059c {
pinctrl-names = "default";
resets = <&reset 0>;
reset-names = "switch";
- reg = <0x6 0x1101059c 0x100>;
+ reg = <0x6 0x1101059c 0x118>;
sgpio_in2: gpio@0 {
reg = <0>;
compatible = "microchip,sparx5-sgpio-bank";
When the support for irqs was added for sgpio driver the memory size was not updated. Because the irq registers are found at address 0x108. Fixes: d0f482bb06f944 ("arm64: dts: sparx5: Add the Sparx5 switch node") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> --- arch/arm64/boot/dts/microchip/sparx5.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)