diff mbox series

[v2,08/66] dt-bindings: media: Add Allwinner A31 MIPI CSI-2 bindings documentation

Message ID 20220205185429.2278860-9-paul.kocialkowski@bootlin.com (mailing list archive)
State New, archived
Headers show
Series Allwinner A31/A83T MIPI CSI-2 Support and A31 ISP Support | expand

Commit Message

Paul Kocialkowski Feb. 5, 2022, 6:53 p.m. UTC 
This introduces YAML bindings documentation for the Allwinner A31 MIPI
CSI-2 controller.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../media/allwinner,sun6i-a31-mipi-csi2.yaml  | 142 ++++++++++++++++++
 1 file changed, 142 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml

Comments

Laurent Pinchart Feb. 7, 2022, 4:09 p.m. UTC | #1 
Hi Paul,

Thank you for the patch.

On Sat, Feb 05, 2022 at 07:53:31PM +0100, Paul Kocialkowski wrote:
> This introduces YAML bindings documentation for the Allwinner A31 MIPI
> CSI-2 controller.
> 
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> Reviewed-by: Maxime Ripard <mripard@kernel.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
>  .../media/allwinner,sun6i-a31-mipi-csi2.yaml  | 142 ++++++++++++++++++
>  1 file changed, 142 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> new file mode 100644
> index 000000000000..09207904b6db
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> @@ -0,0 +1,142 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Allwinner A31 MIPI CSI-2 Device Tree Bindings
> +
> +maintainers:
> +  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: allwinner,sun6i-a31-mipi-csi2
> +      - items:
> +          - const: allwinner,sun8i-v3s-mipi-csi2
> +          - const: allwinner,sun6i-a31-mipi-csi2
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Bus Clock
> +      - description: Module Clock
> +
> +  clock-names:
> +    items:
> +      - const: bus
> +      - const: mod
> +
> +  phys:
> +    maxItems: 1
> +    description: MIPI D-PHY
> +
> +  phy-names:
> +    items:
> +      - const: dphy
> +
> +  resets:
> +    maxItems: 1
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        description: Input port, connect to a MIPI CSI-2 sensor
> +
> +        properties:
> +          reg:
> +            const: 0
> +
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - data-lanes
> +
> +        additionalProperties: false
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        description: Output port, connect to a CSI controller
> +
> +        properties:
> +          reg:
> +            const: 1
> +
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +        additionalProperties: false

The two ports should be required.

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - phys
> +  - phy-names

And ports should be required here.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +  - resets
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
> +    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
> +
> +    mipi_csi2: csi@1cb1000 {
> +        compatible = "allwinner,sun8i-v3s-mipi-csi2",
> +                     "allwinner,sun6i-a31-mipi-csi2";
> +        reg = <0x01cb1000 0x1000>;
> +        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&ccu CLK_BUS_CSI>,
> +                 <&ccu CLK_CSI1_SCLK>;
> +        clock-names = "bus", "mod";
> +        resets = <&ccu RST_BUS_CSI>;
> +
> +        phys = <&dphy>;
> +        phy-names = "dphy";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            mipi_csi2_in: port@0 {
> +                reg = <0>;
> +
> +                mipi_csi2_in_ov5648: endpoint {
> +                    data-lanes = <1 2 3 4>;
> +
> +                    remote-endpoint = <&ov5648_out_mipi_csi2>;
> +                };
> +            };
> +
> +            mipi_csi2_out: port@1 {
> +                reg = <1>;
> +
> +                mipi_csi2_out_csi0: endpoint {
> +                    remote-endpoint = <&csi0_in_mipi_csi2>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
Paul Kocialkowski Feb. 11, 2022, 4:03 p.m. UTC | #2 
Hi Laurent,

Thanks for the review!

On Mon 07 Feb 22, 18:09, Laurent Pinchart wrote:
> Hi Paul,
> 
> Thank you for the patch.
> 
> On Sat, Feb 05, 2022 at 07:53:31PM +0100, Paul Kocialkowski wrote:
> > This introduces YAML bindings documentation for the Allwinner A31 MIPI
> > CSI-2 controller.
> > 
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > Reviewed-by: Maxime Ripard <mripard@kernel.org>
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > ---
> >  .../media/allwinner,sun6i-a31-mipi-csi2.yaml  | 142 ++++++++++++++++++
> >  1 file changed, 142 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> > new file mode 100644
> > index 000000000000..09207904b6db
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> > @@ -0,0 +1,142 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Allwinner A31 MIPI CSI-2 Device Tree Bindings
> > +
> > +maintainers:
> > +  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - const: allwinner,sun6i-a31-mipi-csi2
> > +      - items:
> > +          - const: allwinner,sun8i-v3s-mipi-csi2
> > +          - const: allwinner,sun6i-a31-mipi-csi2
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: Bus Clock
> > +      - description: Module Clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: bus
> > +      - const: mod
> > +
> > +  phys:
> > +    maxItems: 1
> > +    description: MIPI D-PHY
> > +
> > +  phy-names:
> > +    items:
> > +      - const: dphy
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port@0:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        description: Input port, connect to a MIPI CSI-2 sensor
> > +
> > +        properties:
> > +          reg:
> > +            const: 0
> > +
> > +          endpoint:
> > +            $ref: video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              data-lanes:
> > +                minItems: 1
> > +                maxItems: 4
> > +
> > +            required:
> > +              - data-lanes
> > +
> > +        additionalProperties: false
> > +
> > +      port@1:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        description: Output port, connect to a CSI controller
> > +
> > +        properties:
> > +          reg:
> > +            const: 1
> > +
> > +          endpoint:
> > +            $ref: video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +        additionalProperties: false
> 
> The two ports should be required.

Agreed.

> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - phys
> > +  - phy-names
> 
> And ports should be required here.

Sure!

Thanks,

Paul

> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> > +  - resets
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
> > +    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
> > +
> > +    mipi_csi2: csi@1cb1000 {
> > +        compatible = "allwinner,sun8i-v3s-mipi-csi2",
> > +                     "allwinner,sun6i-a31-mipi-csi2";
> > +        reg = <0x01cb1000 0x1000>;
> > +        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> > +        clocks = <&ccu CLK_BUS_CSI>,
> > +                 <&ccu CLK_CSI1_SCLK>;
> > +        clock-names = "bus", "mod";
> > +        resets = <&ccu RST_BUS_CSI>;
> > +
> > +        phys = <&dphy>;
> > +        phy-names = "dphy";
> > +
> > +        ports {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            mipi_csi2_in: port@0 {
> > +                reg = <0>;
> > +
> > +                mipi_csi2_in_ov5648: endpoint {
> > +                    data-lanes = <1 2 3 4>;
> > +
> > +                    remote-endpoint = <&ov5648_out_mipi_csi2>;
> > +                };
> > +            };
> > +
> > +            mipi_csi2_out: port@1 {
> > +                reg = <1>;
> > +
> > +                mipi_csi2_out_csi0: endpoint {
> > +                    remote-endpoint = <&csi0_in_mipi_csi2>;
> > +                };
> > +            };
> > +        };
> > +    };
> > +
> > +...
> 
> -- 
> Regards,
> 
> Laurent Pinchart
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
new file mode 100644
index 000000000000..09207904b6db
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
@@ -0,0 +1,142 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 MIPI CSI-2 Device Tree Bindings
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun6i-a31-mipi-csi2
+      - items:
+          - const: allwinner,sun8i-v3s-mipi-csi2
+          - const: allwinner,sun6i-a31-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  phys:
+    maxItems: 1
+    description: MIPI D-PHY
+
+  phy-names:
+    items:
+      - const: dphy
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Input port, connect to a MIPI CSI-2 sensor
+
+        properties:
+          reg:
+            const: 0
+
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+        additionalProperties: false
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Output port, connect to a CSI controller
+
+        properties:
+          reg:
+            const: 1
+
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+    mipi_csi2: csi@1cb1000 {
+        compatible = "allwinner,sun8i-v3s-mipi-csi2",
+                     "allwinner,sun6i-a31-mipi-csi2";
+        reg = <0x01cb1000 0x1000>;
+        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CSI>,
+                 <&ccu CLK_CSI1_SCLK>;
+        clock-names = "bus", "mod";
+        resets = <&ccu RST_BUS_CSI>;
+
+        phys = <&dphy>;
+        phy-names = "dphy";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mipi_csi2_in: port@0 {
+                reg = <0>;
+
+                mipi_csi2_in_ov5648: endpoint {
+                    data-lanes = <1 2 3 4>;
+
+                    remote-endpoint = <&ov5648_out_mipi_csi2>;
+                };
+            };
+
+            mipi_csi2_out: port@1 {
+                reg = <1>;
+
+                mipi_csi2_out_csi0: endpoint {
+                    remote-endpoint = <&csi0_in_mipi_csi2>;
+                };
+            };
+        };
+    };
+
+...