| Message ID | 20220218113952.3077606-2-mperttunen@nvidia.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Host1x context isolation support | expand |
On 2022-02-18 11:39, Mikko Perttunen via iommu wrote: > Add schema information for the memory-contexts property used to > specify context stream IDs. This uses the standard iommu-map property > inside a child node. Couldn't you simply make "iommu-map" an allowed property on the host1x node itself? From a DT perspective I'm not sure the intermediate node really fits meaningfully, and I can't see that it serves much purpose in practice either, other than perhaps defeating fw_devlink. Robin. > Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> > --- > v3: > * New patch > --- > .../bindings/display/tegra/nvidia,tegra20-host1x.yaml | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml > index 4fd513efb0f7..3ac0fde54a16 100644 > --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml > +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml > @@ -144,6 +144,16 @@ allOf: > reset-names: > maxItems: 1 > > + memory-contexts: > + type: object > + properties: > + iommu-map: > + description: Specification of stream IDs available for memory context device > + use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to > + usable stream IDs. > + required: > + - iommu-map > + > required: > - reg-names >
On 2/21/22 17:23, Robin Murphy wrote: > On 2022-02-18 11:39, Mikko Perttunen via iommu wrote: >> Add schema information for the memory-contexts property used to >> specify context stream IDs. This uses the standard iommu-map property >> inside a child node. > > Couldn't you simply make "iommu-map" an allowed property on the host1x > node itself? From a DT perspective I'm not sure the intermediate node > really fits meaningfully, and I can't see that it serves much purpose in > practice either, other than perhaps defeating fw_devlink. > > Robin. The stream IDs described here are not used by the host1x device itself, so I don't think I can. Host1x's memory transactions still go through the stream ID specified in its 'iommus' property, these stream IDs are used by engines (typically in addition to the stream ID specified in their own nodes). Host1x 'iommus' -- Channel commands Engine 'iommus' -- Engine firmware (and data if context isolation is not enabled) memory-contexts 'iommu-map' -- Data used by engines. (Perhaps I should add this information to various places in more abundance and clarity.) Mikko > >> Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> >> --- >> v3: >> * New patch >> --- >> .../bindings/display/tegra/nvidia,tegra20-host1x.yaml | 10 ++++++++++ >> 1 file changed, 10 insertions(+) >> >> diff --git >> a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml >> b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml >> >> index 4fd513efb0f7..3ac0fde54a16 100644 >> --- >> a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml >> >> +++ >> b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml >> >> @@ -144,6 +144,16 @@ allOf: >> reset-names: >> maxItems: 1 >> + memory-contexts: >> + type: object >> + properties: >> + iommu-map: >> + description: Specification of stream IDs available for >> memory context device >> + use. Should be a mapping of IDs 0..n to IOMMU entries >> corresponding to >> + usable stream IDs. >> + required: >> + - iommu-map >> + >> required: >> - reg-names
On 2022-02-21 15:28, Mikko Perttunen wrote: > On 2/21/22 17:23, Robin Murphy wrote: >> On 2022-02-18 11:39, Mikko Perttunen via iommu wrote: >>> Add schema information for the memory-contexts property used to >>> specify context stream IDs. This uses the standard iommu-map property >>> inside a child node. >> >> Couldn't you simply make "iommu-map" an allowed property on the host1x >> node itself? From a DT perspective I'm not sure the intermediate node >> really fits meaningfully, and I can't see that it serves much purpose >> in practice either, other than perhaps defeating fw_devlink. >> >> Robin. > > The stream IDs described here are not used by the host1x device itself, > so I don't think I can. Host1x's memory transactions still go through > the stream ID specified in its 'iommus' property, these stream IDs are > used by engines (typically in addition to the stream ID specified in > their own nodes). > > Host1x 'iommus' -- Channel commands > Engine 'iommus' -- Engine firmware (and data if context isolation is not > enabled) > memory-contexts 'iommu-map' -- Data used by engines. Right, that still appears to match my understanding, that as far as software sees, the host1x is effectively acting as a bridge to the engines in itself. Even if it's not physically routing traffic in and/or out, the host1x device is the place where the context IDs *logically* exist, and thus owns the mapping between context IDs and the StreamIDs emitted by any engine working in a given context. Consider a PCIe root complex with integrated endpoints - chances are the RCiEPs have their own physical interfaces to issue DMA directly into the SoC interconnect, but that doesn't change how we describe the PCI Requester ID to StreamID mapping at the root complex, since the RC still logically owns the RID space. You can think of a RID as being "consumed" at the RC by indexing into config space to ultimately gain control of the corresponding endpoint, just like context IDs are "consumed" at the host1x by generating commands to ultimately cause some engine to operate in the correct address space. You don't have to pretend the host1x uses a context for its own command-fetching (or whatever) traffic either - it's always been intended that the "iommus" and "iommu-map" properties should happily be able to coexist on the same node, since they serve distinctly different purposes. If it doesn't work in practice then we've got a bug to fix somewhere. If the context-switching mechanism was some distinct self-contained thing bolted on beside the other host1x functionality then describing it as a separate level of DT hierarchy might be more justifiable, but that's not the impression I'm getting from skimming the rest of the series. Just reading of the names of things in patch #6, my intuitive reaction is that clearly each host1x owns 9 StreamIDs, one for general stuff and 8 for contexts. Adding the knowledge that technically the context StreamIDs end up delegated to other host1x-controlled engines still doesn't shift the paradigm. I don't believe we need a level of DT structure purely to help document what the iommu-map means for host1x - the binding can do that just fine. Thanks, Robin. > (Perhaps I should add this information to various places in more > abundance and clarity.) > > Mikko > >> >>> Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> >>> --- >>> v3: >>> * New patch >>> --- >>> .../bindings/display/tegra/nvidia,tegra20-host1x.yaml | 10 ++++++++++ >>> 1 file changed, 10 insertions(+) >>> >>> diff --git >>> a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml >>> b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml >>> >>> index 4fd513efb0f7..3ac0fde54a16 100644 >>> --- >>> a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml >>> >>> +++ >>> b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml >>> >>> @@ -144,6 +144,16 @@ allOf: >>> reset-names: >>> maxItems: 1 >>> + memory-contexts: >>> + type: object >>> + properties: >>> + iommu-map: >>> + description: Specification of stream IDs available for >>> memory context device >>> + use. Should be a mapping of IDs 0..n to IOMMU >>> entries corresponding to >>> + usable stream IDs. >>> + required: >>> + - iommu-map >>> + >>> required: >>> - reg-names >
On 2/21/22 18:58, Robin Murphy wrote: > On 2022-02-21 15:28, Mikko Perttunen wrote: >> On 2/21/22 17:23, Robin Murphy wrote: >>> On 2022-02-18 11:39, Mikko Perttunen via iommu wrote: >>>> Add schema information for the memory-contexts property used to >>>> specify context stream IDs. This uses the standard iommu-map property >>>> inside a child node. >>> >>> Couldn't you simply make "iommu-map" an allowed property on the >>> host1x node itself? From a DT perspective I'm not sure the >>> intermediate node really fits meaningfully, and I can't see that it >>> serves much purpose in practice either, other than perhaps defeating >>> fw_devlink. >>> >>> Robin. >> >> The stream IDs described here are not used by the host1x device >> itself, so I don't think I can. Host1x's memory transactions still go >> through the stream ID specified in its 'iommus' property, these stream >> IDs are used by engines (typically in addition to the stream ID >> specified in their own nodes). >> >> Host1x 'iommus' -- Channel commands >> Engine 'iommus' -- Engine firmware (and data if context isolation is >> not enabled) >> memory-contexts 'iommu-map' -- Data used by engines. > > Right, that still appears to match my understanding, that as far as > software sees, the host1x is effectively acting as a bridge to the > engines in itself. Even if it's not physically routing traffic in and/or > out, the host1x device is the place where the context IDs *logically* > exist, and thus owns the mapping between context IDs and the StreamIDs > emitted by any engine working in a given context. > > Consider a PCIe root complex with integrated endpoints - chances are the > RCiEPs have their own physical interfaces to issue DMA directly into the > SoC interconnect, but that doesn't change how we describe the PCI > Requester ID to StreamID mapping at the root complex, since the RC still > logically owns the RID space. You can think of a RID as being "consumed" > at the RC by indexing into config space to ultimately gain control of > the corresponding endpoint, just like context IDs are "consumed" at the > host1x by generating commands to ultimately cause some engine to > operate in the correct address space. > > You don't have to pretend the host1x uses a context for its own > command-fetching (or whatever) traffic either - it's always been > intended that the "iommus" and "iommu-map" properties should happily be > able to coexist on the same node, since they serve distinctly different > purposes. If it doesn't work in practice then we've got a bug to fix > somewhere. > Interesting, I had assumed that they were exclusive but indeed comparing with PCIe this makes sense. I'll look into it. > If the context-switching mechanism was some distinct self-contained > thing bolted on beside the other host1x functionality then describing it > as a separate level of DT hierarchy might be more justifiable, but > that's not the impression I'm getting from skimming the rest of the > series. Just reading of the names of things in patch #6, my intuitive > reaction is that clearly each host1x owns 9 StreamIDs, one for general > stuff and 8 for contexts. Adding the knowledge that technically the > context StreamIDs end up delegated to other host1x-controlled engines > still doesn't shift the paradigm. I don't believe we need a level of DT > structure purely to help document what the iommu-map means for host1x - > the binding can do that just fine. Theoretically there can be any number of these stream IDs, but indeed, there is quite specific HW support for this in Host1x. Thanks for your help once again! Mikko > > Thanks, > Robin. > >> (Perhaps I should add this information to various places in more >> abundance and clarity.) >> >> Mikko >> >>> >>>> Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> >>>> --- >>>> v3: >>>> * New patch >>>> --- >>>> .../bindings/display/tegra/nvidia,tegra20-host1x.yaml | 10 >>>> ++++++++++ >>>> 1 file changed, 10 insertions(+) >>>> >>>> diff --git >>>> a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml >>>> b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml >>>> >>>> index 4fd513efb0f7..3ac0fde54a16 100644 >>>> --- >>>> a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml >>>> >>>> +++ >>>> b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml >>>> >>>> @@ -144,6 +144,16 @@ allOf: >>>> reset-names: >>>> maxItems: 1 >>>> + memory-contexts: >>>> + type: object >>>> + properties: >>>> + iommu-map: >>>> + description: Specification of stream IDs available >>>> for memory context device >>>> + use. Should be a mapping of IDs 0..n to IOMMU >>>> entries corresponding to >>>> + usable stream IDs. >>>> + required: >>>> + - iommu-map >>>> + >>>> required: >>>> - reg-names >>
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml index 4fd513efb0f7..3ac0fde54a16 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml @@ -144,6 +144,16 @@ allOf: reset-names: maxItems: 1 + memory-contexts: + type: object + properties: + iommu-map: + description: Specification of stream IDs available for memory context device + use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to + usable stream IDs. + required: + - iommu-map + required: - reg-names
Add schema information for the memory-contexts property used to specify context stream IDs. This uses the standard iommu-map property inside a child node. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> --- v3: * New patch --- .../bindings/display/tegra/nvidia,tegra20-host1x.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+)