[v1,1/2] drm/aspeed: Add gfx flags and clock selection for AST2600

Commit Message

Tommy Huang March 4, 2022, 6:31 a.m. UTC

Add clock selection code for AST2600. At AST2600 user could
select more than one dispaly timing. Add gfx flags for future
usage.

Signed-off-by: Tommy Haung <[e-mail]>
---
 drivers/gpu/drm/aspeed/aspeed_gfx.h      | 11 +++++++++++
 drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c | 14 ++++++++++++++
 drivers/gpu/drm/aspeed/aspeed_gfx_drv.c  |  4 ++++
 3 files changed, 29 insertions(+)

Patch

diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h
index 4e6a442c3886..eb4c267cde5e 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
@@ -16,6 +16,7 @@  struct aspeed_gfx {
 	u32				vga_scratch_reg;
 	u32				throd_val;
 	u32				scan_line_max;
+	u32				flags;
 
 	struct drm_simple_display_pipe	pipe;
 	struct drm_connector		connector;
@@ -106,3 +107,13 @@  int aspeed_gfx_create_output(struct drm_device *drm);
 /* CRT_THROD */
 #define CRT_THROD_LOW(x)		(x)
 #define CRT_THROD_HIGH(x)		((x) << 8)
+
+/* SCU control */
+#define SCU_G6_CLK_COURCE		0x300
+
+/* GFX FLAGS */
+#define CLK_MASK			BIT(0)
+#define CLK_G6				BIT(0)
+
+#define G6_CLK_MASK			(BIT(8) | BIT(9) | BIT(10))
+#define G6_USB_40_CLK			BIT(9)
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
index 827e62c1daba..a24fab22eac4 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
@@ -77,6 +77,18 @@  static void aspeed_gfx_disable_controller(struct aspeed_gfx *priv)
 	regmap_update_bits(priv->scu, priv->dac_reg, BIT(16), 0);
 }
 
+static void aspeed_gfx_set_clk(struct aspeed_gfx *priv)
+{
+	switch (priv->flags & CLK_MASK) {
+	case CLK_G6:
+		regmap_update_bits(priv->scu, SCU_G6_CLK_COURCE, G6_CLK_MASK, 0x0);
+		regmap_update_bits(priv->scu, SCU_G6_CLK_COURCE, G6_CLK_MASK, G6_USB_40_CLK);
+		break;
+	default:
+		break;
+	}
+}
+
 static void aspeed_gfx_crtc_mode_set_nofb(struct aspeed_gfx *priv)
 {
 	struct drm_display_mode *m = &priv->pipe.crtc.state->adjusted_mode;
@@ -87,6 +99,8 @@  static void aspeed_gfx_crtc_mode_set_nofb(struct aspeed_gfx *priv)
 	if (err)
 		return;
 
+	aspeed_gfx_set_clk(priv);
+
 #if 0
 	/* TODO: we have only been able to test with the 40MHz USB clock. The
 	 * clock is fixed, so we cannot adjust it here. */
diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
index d10246b1d1c2..af56ffdccc65 100644
--- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
+++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
@@ -64,6 +64,7 @@  struct aspeed_gfx_config {
 	u32 vga_scratch_reg;	/* VGA scratch register in SCU */
 	u32 throd_val;		/* Default Threshold Seting */
 	u32 scan_line_max;	/* Max memory size of one scan line */
+	u32 gfx_flags;	/* Flags for gfx chip caps */
 };
 
 static const struct aspeed_gfx_config ast2400_config = {
@@ -72,6 +73,7 @@  static const struct aspeed_gfx_config ast2400_config = {
 	.vga_scratch_reg = 0x50,
 	.throd_val = CRT_THROD_LOW(0x1e) | CRT_THROD_HIGH(0x12),
 	.scan_line_max = 64,
+	.gfx_flags = 0,
 };
 
 static const struct aspeed_gfx_config ast2500_config = {
@@ -80,6 +82,7 @@  static const struct aspeed_gfx_config ast2500_config = {
 	.vga_scratch_reg = 0x50,
 	.throd_val = CRT_THROD_LOW(0x24) | CRT_THROD_HIGH(0x3c),
 	.scan_line_max = 128,
+	.gfx_flags = 0,
 };
 
 static const struct aspeed_gfx_config ast2600_config = {
@@ -88,6 +91,7 @@  static const struct aspeed_gfx_config ast2600_config = {
 	.vga_scratch_reg = 0x50,
 	.throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70),
 	.scan_line_max = 128,
+	.gfx_flags = CLK_G6,
 };
 
 static const struct of_device_id aspeed_gfx_match[] = {