Message ID | 20220307130307.106102-2-sergiu.moga@microchip.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | dt-bindings: pwm: convert atmel pwm to json-schema | expand |
On 07/03/2022 14:03, Sergiu Moga wrote: > Convert PWM binding for Atmel/Microchip SoCs to Device Tree Schema > format. > > Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> > --- > .../devicetree/bindings/pwm/atmel-pwm.txt | 35 ----------- > .../devicetree/bindings/pwm/atmel-pwm.yaml | 62 +++++++++++++++++++ > 2 files changed, 62 insertions(+), 35 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/pwm/atmel-pwm.txt > create mode 100644 Documentation/devicetree/bindings/pwm/atmel-pwm.yaml > > diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt > deleted file mode 100644 > index fbb5325be1f0..000000000000 > --- a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt I would prefer for new files to switch to common DT conversion: vendor,name.yaml You have there another PWM bindings for Atmel, so the name should not be just "pwm" but something more specific, maybe "at91sam-pwm"? > +++ /dev/null > @@ -1,35 +0,0 @@ > -Atmel PWM controller > - > -Required properties: > - - compatible: should be one of: > - - "atmel,at91sam9rl-pwm" > - - "atmel,sama5d3-pwm" > - - "atmel,sama5d2-pwm" > - - "microchip,sam9x60-pwm" > - - reg: physical base address and length of the controller's registers > - - #pwm-cells: Should be 3. See pwm.yaml in this directory for a > - description of the cells format. > - > -Example: > - > - pwm0: pwm@f8034000 { > - compatible = "atmel,at91sam9rl-pwm"; > - reg = <0xf8034000 0x400>; > - #pwm-cells = <3>; > - }; > - > - pwmleds { > - compatible = "pwm-leds"; > - > - d1 { > - label = "d1"; > - pwms = <&pwm0 3 5000 0> > - max-brightness = <255>; > - }; > - > - d2 { > - label = "d2"; > - pwms = <&pwm0 1 5000 1> > - max-brightness = <255>; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel-pwm.yaml > new file mode 100644 > index 000000000000..f5378a2226bd > --- /dev/null > +++ b/Documentation/devicetree/bindings/pwm/atmel-pwm.yaml > @@ -0,0 +1,62 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pwm/atmel-pwm.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Atmel PWM controller title: Atmel/Microchip PWM controller > + > +maintainers: > + - Claudiu Beznea <claudiu.beznea@microchip.com> > + allOf including pwm.yaml > +properties: > + compatible: > + enum: > + - atmel,at91sam9rl-pwm > + - atmel,sama5d3-pwm > + - atmel,sama5d2-pwm > + - microchip,sam9x60-pwm > + > + reg: > + description: | > + Physical base address and length of the controller's > + registers Skip description, it's obvious. > + maxItems: 1 > + > + "#pwm-cells": > + description: | > + Should be 3. See pwm.yaml in this directory for a > + description of the cells format. Skip description, it's obvious. > + const: 3 > + > +required: > + - compatible > + - reg > + - "#pwm-cells" Skip pwm-cells, required by pwm.yaml. > + > +additionalProperties: true > + > +examples: > + - | > + pwm0: pwm@f8034000 { > + compatible = "atmel,at91sam9rl-pwm"; > + reg = <0xf8034000 0x400>; > + #pwm-cells = <3>; > + }; > + > + pwmleds { Skip this node. No actual benefit. All clients are the same. > + compatible = "pwm-leds"; > + > + led-1 { > + label = "led-1"; > + pwms = <&pwm0 3 5000 0>; > + max-brightness = <255>; > + }; > + > + led-2 { > + label = "led-2"; > + pwms = <&pwm0 1 5000 1>; > + max-brightness = <255>; > + }; > + }; Best regards, Krzysztof
On 07.03.2022 15:22, Krzysztof Kozlowski wrote: > On 07/03/2022 14:03, Sergiu Moga wrote: >> Convert PWM binding for Atmel/Microchip SoCs to Device Tree Schema >> format. >> >> Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> >> --- >> .../devicetree/bindings/pwm/atmel-pwm.txt | 35 ----------- >> .../devicetree/bindings/pwm/atmel-pwm.yaml | 62 +++++++++++++++++++ >> 2 files changed, 62 insertions(+), 35 deletions(-) >> delete mode 100644 Documentation/devicetree/bindings/pwm/atmel-pwm.txt >> create mode 100644 Documentation/devicetree/bindings/pwm/atmel-pwm.yaml >> >> diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt >> deleted file mode 100644 >> index fbb5325be1f0..000000000000 >> --- a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt > I would prefer for new files to switch to common DT conversion: > vendor,name.yaml > > You have there another PWM bindings for Atmel, so the name should not be > just "pwm" but something more specific, maybe "at91sam-pwm"? > > Understood, yes, it does make more sense like this. Thank you for the suggestion, I will rename the file to `atmel,at91sam-pwm.yaml`. >> +++ /dev/null >> @@ -1,35 +0,0 @@ >> -Atmel PWM controller >> - >> -Required properties: >> - - compatible: should be one of: >> - - "atmel,at91sam9rl-pwm" >> - - "atmel,sama5d3-pwm" >> - - "atmel,sama5d2-pwm" >> - - "microchip,sam9x60-pwm" >> - - reg: physical base address and length of the controller's registers >> - - #pwm-cells: Should be 3. See pwm.yaml in this directory for a >> - description of the cells format. >> - >> -Example: >> - >> - pwm0: pwm@f8034000 { >> - compatible = "atmel,at91sam9rl-pwm"; >> - reg = <0xf8034000 0x400>; >> - #pwm-cells = <3>; >> - }; >> - >> - pwmleds { >> - compatible = "pwm-leds"; >> - >> - d1 { >> - label = "d1"; >> - pwms = <&pwm0 3 5000 0> >> - max-brightness = <255>; >> - }; >> - >> - d2 { >> - label = "d2"; >> - pwms = <&pwm0 1 5000 1> >> - max-brightness = <255>; >> - }; >> - }; >> diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel-pwm.yaml >> new file mode 100644 >> index 000000000000..f5378a2226bd >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/pwm/atmel-pwm.yaml >> @@ -0,0 +1,62 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/pwm/atmel-pwm.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Atmel PWM controller > title: Atmel/Microchip PWM controller > >> + >> +maintainers: >> + - Claudiu Beznea <claudiu.beznea@microchip.com> >> + > allOf including pwm.yaml > Noted. >> +properties: >> + compatible: >> + enum: >> + - atmel,at91sam9rl-pwm >> + - atmel,sama5d3-pwm >> + - atmel,sama5d2-pwm >> + - microchip,sam9x60-pwm >> + >> + reg: >> + description: | >> + Physical base address and length of the controller's >> + registers > Skip description, it's obvious. > >> + maxItems: 1 >> + >> + "#pwm-cells": >> + description: | >> + Should be 3. See pwm.yaml in this directory for a >> + description of the cells format. > Skip description, it's obvious. > >> + const: 3 >> + >> +required: >> + - compatible >> + - reg >> + - "#pwm-cells" > Skip pwm-cells, required by pwm.yaml. > Understood, will remove it in the next version along with the unnecessary descriptions. >> + >> +additionalProperties: true >> + >> +examples: >> + - | >> + pwm0: pwm@f8034000 { >> + compatible = "atmel,at91sam9rl-pwm"; >> + reg = <0xf8034000 0x400>; >> + #pwm-cells = <3>; >> + }; >> + >> + pwmleds { > Skip this node. No actual benefit. All clients are the same. > Understood. I will include `pwm0` only. >> + compatible = "pwm-leds"; >> + >> + led-1 { >> + label = "led-1"; >> + pwms = <&pwm0 3 5000 0>; >> + max-brightness = <255>; >> + }; >> + >> + led-2 { >> + label = "led-2"; >> + pwms = <&pwm0 1 5000 1>; >> + max-brightness = <255>; >> + }; >> + }; > > Best regards, > Krzysztof Thank you for the detailed feedback. Sergiu
diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt deleted file mode 100644 index fbb5325be1f0..000000000000 --- a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt +++ /dev/null @@ -1,35 +0,0 @@ -Atmel PWM controller - -Required properties: - - compatible: should be one of: - - "atmel,at91sam9rl-pwm" - - "atmel,sama5d3-pwm" - - "atmel,sama5d2-pwm" - - "microchip,sam9x60-pwm" - - reg: physical base address and length of the controller's registers - - #pwm-cells: Should be 3. See pwm.yaml in this directory for a - description of the cells format. - -Example: - - pwm0: pwm@f8034000 { - compatible = "atmel,at91sam9rl-pwm"; - reg = <0xf8034000 0x400>; - #pwm-cells = <3>; - }; - - pwmleds { - compatible = "pwm-leds"; - - d1 { - label = "d1"; - pwms = <&pwm0 3 5000 0> - max-brightness = <255>; - }; - - d2 { - label = "d2"; - pwms = <&pwm0 1 5000 1> - max-brightness = <255>; - }; - }; diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel-pwm.yaml new file mode 100644 index 000000000000..f5378a2226bd --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/atmel-pwm.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/atmel-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel PWM controller + +maintainers: + - Claudiu Beznea <claudiu.beznea@microchip.com> + +properties: + compatible: + enum: + - atmel,at91sam9rl-pwm + - atmel,sama5d3-pwm + - atmel,sama5d2-pwm + - microchip,sam9x60-pwm + + reg: + description: | + Physical base address and length of the controller's + registers + maxItems: 1 + + "#pwm-cells": + description: | + Should be 3. See pwm.yaml in this directory for a + description of the cells format. + const: 3 + +required: + - compatible + - reg + - "#pwm-cells" + +additionalProperties: true + +examples: + - | + pwm0: pwm@f8034000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xf8034000 0x400>; + #pwm-cells = <3>; + }; + + pwmleds { + compatible = "pwm-leds"; + + led-1 { + label = "led-1"; + pwms = <&pwm0 3 5000 0>; + max-brightness = <255>; + }; + + led-2 { + label = "led-2"; + pwms = <&pwm0 1 5000 1>; + max-brightness = <255>; + }; + };
Convert PWM binding for Atmel/Microchip SoCs to Device Tree Schema format. Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> --- .../devicetree/bindings/pwm/atmel-pwm.txt | 35 ----------- .../devicetree/bindings/pwm/atmel-pwm.yaml | 62 +++++++++++++++++++ 2 files changed, 62 insertions(+), 35 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pwm/atmel-pwm.txt create mode 100644 Documentation/devicetree/bindings/pwm/atmel-pwm.yaml