diff mbox series

[2/3] dt-bindings: i2c: convert i2c-at91 to json-schema

Message ID 20220309120714.51393-3-sergiu.moga@microchip.com (mailing list archive)
State New, archived
Headers show
Series dt-bindings: i2c: convert i2c-at91 to json-schema | expand

Commit Message

Sergiu Moga March 9, 2022, 12:07 p.m. UTC
Convert I2C binding for Atmel/Microchip SoCs to Device Tree Schema
format.

Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
---
 .../bindings/i2c/atmel,at91sam-i2c.yaml       | 144 ++++++++++++++++++
 .../devicetree/bindings/i2c/i2c-at91.txt      |  82 ----------
 2 files changed, 144 insertions(+), 82 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
 delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-at91.txt

Comments

Rob Herring (Arm) March 9, 2022, 10:20 p.m. UTC | #1
On Wed, 09 Mar 2022 14:07:13 +0200, Sergiu Moga wrote:
> Convert I2C binding for Atmel/Microchip SoCs to Device Tree Schema
> format.
> 
> Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
> ---
>  .../bindings/i2c/atmel,at91sam-i2c.yaml       | 144 ++++++++++++++++++
>  .../devicetree/bindings/i2c/i2c-at91.txt      |  82 ----------
>  2 files changed, 144 insertions(+), 82 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
>  delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-at91.txt
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.example.dt.yaml:0:0: /example-0/i2c@f8034600/eeprom@1a: failed to match any schema with compatible: ['wm8731']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1603370

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Krzysztof Kozlowski March 10, 2022, 7:21 a.m. UTC | #2
On 09/03/2022 13:07, Sergiu Moga wrote:
> Convert I2C binding for Atmel/Microchip SoCs to Device Tree Schema
> format.
> 
> Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
> ---
>  .../bindings/i2c/atmel,at91sam-i2c.yaml       | 144 ++++++++++++++++++
>  .../devicetree/bindings/i2c/i2c-at91.txt      |  82 ----------
>  2 files changed, 144 insertions(+), 82 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
>  delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-at91.txt
> 
> diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
> new file mode 100644
> index 000000000000..d4aadbbd1a11
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
> @@ -0,0 +1,144 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/atmel,at91sam-i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: I2C for Atmel/Microchip platforms
> +
> +maintainers:
> +  - Alexandre Belloni <alexandre.belloni@bootlin.com>
> +
> +allOf:
> +  - $ref: "i2c-controller.yaml"
> +  - if:

allOf with additional if: goes by convention after required:.

> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - atmel,sama5d4-i2c
> +              - atmel,sama5d2-i2c
> +              - microchip,sam9x60-i2c
> +    then:
> +      properties:
> +        i2c-sda-hold-time-ns:
> +          description:
> +            TWD hold time
> +          maxItems: 1
> +
> +properties:
> +  compatible:
> +    enum:
> +      - atmel,at91rm9200-i2c
> +      - atmel,at91sam9261-i2c
> +      - atmel,at91sam9260-i2c
> +      - atmel,at91sam9g20-i2c
> +      - atmel,at91sam9g10-i2c
> +      - atmel,at91sam9x5-i2c
> +      - atmel,sama5d4-i2c
> +      - atmel,sama5d2-i2c
> +      - microchip,sam9x60-i2c
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-frequency:
> +    default: 100000
> +
> +  dmas:
> +    items:
> +      - description: TX DMA Channel Specifier
> +      - description: RX DMA Channel Specifier
> +
> +  dma-names:
> +    items:
> +      - const: tx
> +      - const: rx
> +
> +  atmel,fifo-size:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      Maximum number of data the RX and TX FIFOs can store for
> +      FIFO capable I2C controllers.
> +
> +  scl-gpios: true
> +
> +  sda-gpios: true
> +
> +  pinctrl:
> +    description: |
> +      Add extra pinctrl to configure i2c pins to gpio function for i2c
> +      bus recovery, call it "gpio" state

This is a generic property, you do not need it.

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - "#address-cells"
> +  - "#size-cells"
> +  - clocks
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/dma/at91.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c0: i2c@fff84000 {
> +        compatible = "atmel,at91sam9g20-i2c";
> +        reg = <0xfff84000 0x100>;
> +        interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        clocks = <&twi0_clk>;
> +        clock-frequency = <400000>;
> +
> +        eeprom@50 {
> +            compatible = "atmel,24c512";
> +            reg = <0x50>;
> +            pagesize = <128>;
> +        };
> +    };
> +
> +    i2c1: i2c@f8034600 {
> +        compatible = "atmel,sama5d2-i2c";
> +        reg = <0xf8034600 0x100>;
> +        interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
> +        dmas = <&dma0
> +            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
> +            AT91_XDMAC_DT_PERID(11)>,
> +               <&dma0
> +            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
> +            AT91_XDMAC_DT_PERID(12)>;
> +        dma-names = "tx", "rx";
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        clocks = <&flx0>;
> +        atmel,fifo-size = <16>;
> +        i2c-sda-hold-time-ns = <336>;
> +        pinctrl-names = "default", "gpio";
> +        pinctrl-0 = <&pinctrl_i2c0>;
> +        pinctrl-1 = <&pinctrl_i2c0_gpio>;
> +        sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
> +        scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +
> +        eeprom@1a {
> +            compatible = "wm8731";

It seems this is undocumented compatible. Could you use something else,
documented?

Best regards,
Krzysztof
Sergiu Moga March 10, 2022, 10:33 a.m. UTC | #3
On 10.03.2022 09:21, Krzysztof Kozlowski wrote:
> On 09/03/2022 13:07, Sergiu Moga wrote:
>> Convert I2C binding for Atmel/Microchip SoCs to Device Tree Schema
>> format.
>>
>> Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
>> ---
>>   .../bindings/i2c/atmel,at91sam-i2c.yaml       | 144 ++++++++++++++++++
>>   .../devicetree/bindings/i2c/i2c-at91.txt      |  82 ----------
>>   2 files changed, 144 insertions(+), 82 deletions(-)
>>   create mode 100644 Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
>>   delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-at91.txt
>>
>> diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
>> new file mode 100644
>> index 000000000000..d4aadbbd1a11
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
>> @@ -0,0 +1,144 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/i2c/atmel,at91sam-i2c.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: I2C for Atmel/Microchip platforms
>> +
>> +maintainers:
>> +  - Alexandre Belloni <alexandre.belloni@bootlin.com>
>> +
>> +allOf:
>> +  - $ref: "i2c-controller.yaml"
>> +  - if:
> allOf with additional if: goes by convention after required:.
>
Understood. I will move the `allOf` after `required:`.

>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - atmel,sama5d4-i2c
>> +              - atmel,sama5d2-i2c
>> +              - microchip,sam9x60-i2c
>> +    then:
>> +      properties:
>> +        i2c-sda-hold-time-ns:
>> +          description:
>> +            TWD hold time
>> +          maxItems: 1
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - atmel,at91rm9200-i2c
>> +      - atmel,at91sam9261-i2c
>> +      - atmel,at91sam9260-i2c
>> +      - atmel,at91sam9g20-i2c
>> +      - atmel,at91sam9g10-i2c
>> +      - atmel,at91sam9x5-i2c
>> +      - atmel,sama5d4-i2c
>> +      - atmel,sama5d2-i2c
>> +      - microchip,sam9x60-i2c
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  "#address-cells":
>> +    const: 1
>> +
>> +  "#size-cells":
>> +    const: 0
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  clock-frequency:
>> +    default: 100000
>> +
>> +  dmas:
>> +    items:
>> +      - description: TX DMA Channel Specifier
>> +      - description: RX DMA Channel Specifier
>> +
>> +  dma-names:
>> +    items:
>> +      - const: tx
>> +      - const: rx
>> +
>> +  atmel,fifo-size:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description: |
>> +      Maximum number of data the RX and TX FIFOs can store for
>> +      FIFO capable I2C controllers.
>> +
>> +  scl-gpios: true
>> +
>> +  sda-gpios: true
>> +
>> +  pinctrl:
>> +    description: |
>> +      Add extra pinctrl to configure i2c pins to gpio function for i2c
>> +      bus recovery, call it "gpio" state
> This is a generic property, you do not need it.
>
Will remove it in the next version. Thank you.

>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupts
>> +  - "#address-cells"
>> +  - "#size-cells"
>> +  - clocks
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/interrupt-controller/irq.h>
>> +    #include <dt-bindings/dma/at91.h>
>> +    #include <dt-bindings/gpio/gpio.h>
>> +
>> +    i2c0: i2c@fff84000 {
>> +        compatible = "atmel,at91sam9g20-i2c";
>> +        reg = <0xfff84000 0x100>;
>> +        interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
>> +        #address-cells = <1>;
>> +        #size-cells = <0>;
>> +        clocks = <&twi0_clk>;
>> +        clock-frequency = <400000>;
>> +
>> +        eeprom@50 {
>> +            compatible = "atmel,24c512";
>> +            reg = <0x50>;
>> +            pagesize = <128>;
>> +        };
>> +    };
>> +
>> +    i2c1: i2c@f8034600 {
>> +        compatible = "atmel,sama5d2-i2c";
>> +        reg = <0xf8034600 0x100>;
>> +        interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
>> +        dmas = <&dma0
>> +            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
>> +            AT91_XDMAC_DT_PERID(11)>,
>> +               <&dma0
>> +            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
>> +            AT91_XDMAC_DT_PERID(12)>;
>> +        dma-names = "tx", "rx";
>> +        #address-cells = <1>;
>> +        #size-cells = <0>;
>> +        clocks = <&flx0>;
>> +        atmel,fifo-size = <16>;
>> +        i2c-sda-hold-time-ns = <336>;
>> +        pinctrl-names = "default", "gpio";
>> +        pinctrl-0 = <&pinctrl_i2c0>;
>> +        pinctrl-1 = <&pinctrl_i2c0_gpio>;
>> +        sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
>> +        scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
>> +
>> +        eeprom@1a {
>> +            compatible = "wm8731";
> It seems this is undocumented compatible. Could you use something else,
> documented?
>
I will replace it with a node with a documented compatible in the next 
version.

> Best regards,
> Krzysztof

Thank you for the feedback.

Sergiu
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
new file mode 100644
index 000000000000..d4aadbbd1a11
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
@@ -0,0 +1,144 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/atmel,at91sam-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C for Atmel/Microchip platforms
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: "i2c-controller.yaml"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - atmel,sama5d4-i2c
+              - atmel,sama5d2-i2c
+              - microchip,sam9x60-i2c
+    then:
+      properties:
+        i2c-sda-hold-time-ns:
+          description:
+            TWD hold time
+          maxItems: 1
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91rm9200-i2c
+      - atmel,at91sam9261-i2c
+      - atmel,at91sam9260-i2c
+      - atmel,at91sam9g20-i2c
+      - atmel,at91sam9g10-i2c
+      - atmel,at91sam9x5-i2c
+      - atmel,sama5d4-i2c
+      - atmel,sama5d2-i2c
+      - microchip,sam9x60-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+
+  dmas:
+    items:
+      - description: TX DMA Channel Specifier
+      - description: RX DMA Channel Specifier
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  atmel,fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum number of data the RX and TX FIFOs can store for
+      FIFO capable I2C controllers.
+
+  scl-gpios: true
+
+  sda-gpios: true
+
+  pinctrl:
+    description: |
+      Add extra pinctrl to configure i2c pins to gpio function for i2c
+      bus recovery, call it "gpio" state
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c0: i2c@fff84000 {
+        compatible = "atmel,at91sam9g20-i2c";
+        reg = <0xfff84000 0x100>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&twi0_clk>;
+        clock-frequency = <400000>;
+
+        eeprom@50 {
+            compatible = "atmel,24c512";
+            reg = <0x50>;
+            pagesize = <128>;
+        };
+    };
+
+    i2c1: i2c@f8034600 {
+        compatible = "atmel,sama5d2-i2c";
+        reg = <0xf8034600 0x100>;
+        interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+            AT91_XDMAC_DT_PERID(11)>,
+               <&dma0
+            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+            AT91_XDMAC_DT_PERID(12)>;
+        dma-names = "tx", "rx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&flx0>;
+        atmel,fifo-size = <16>;
+        i2c-sda-hold-time-ns = <336>;
+        pinctrl-names = "default", "gpio";
+        pinctrl-0 = <&pinctrl_i2c0>;
+        pinctrl-1 = <&pinctrl_i2c0_gpio>;
+        sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+        scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+        eeprom@1a {
+            compatible = "wm8731";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
deleted file mode 100644
index 2015f50aed0f..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ /dev/null
@@ -1,82 +0,0 @@ 
-I2C for Atmel platforms
-
-Required properties :
-- compatible : Must be one of:
-	"atmel,at91rm9200-i2c",
-	"atmel,at91sam9261-i2c",
-	"atmel,at91sam9260-i2c",
-	"atmel,at91sam9g20-i2c",
-	"atmel,at91sam9g10-i2c",
-	"atmel,at91sam9x5-i2c",
-	"atmel,sama5d4-i2c",
-	"atmel,sama5d2-i2c",
-	"microchip,sam9x60-i2c".
-- reg: physical base address of the controller and length of memory mapped
-     region.
-- interrupts: interrupt number to the cpu.
-- #address-cells = <1>;
-- #size-cells = <0>;
-- clocks: phandles to input clocks.
-
-Optional properties:
-- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
-- dmas: A list of two dma specifiers, one for each entry in dma-names.
-- dma-names: should contain "tx" and "rx".
-- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
-  capable I2C controllers.
-- i2c-sda-hold-time-ns: TWD hold time, only available for:
-	"atmel,sama5d4-i2c",
-	"atmel,sama5d2-i2c",
-	"microchip,sam9x60-i2c".
-- scl-gpios: specify the gpio related to SCL pin
-- sda-gpios: specify the gpio related to SDA pin
-- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
-  bus recovery, call it "gpio" state
-- Child nodes conforming to i2c bus binding
-
-
-Examples :
-
-i2c0: i2c@fff84000 {
-	compatible = "atmel,at91sam9g20-i2c";
-	reg = <0xfff84000 0x100>;
-	interrupts = <12 4 6>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clocks = <&twi0_clk>;
-	clock-frequency = <400000>;
-
-	24c512@50 {
-		compatible = "atmel,24c512";
-		reg = <0x50>;
-		pagesize = <128>;
-	}
-}
-
-i2c0: i2c@f8034600 {
-	compatible = "atmel,sama5d2-i2c";
-	reg = <0xf8034600 0x100>;
-	interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-	dmas = <&dma0
-		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-		AT91_XDMAC_DT_PERID(11)>,
-	       <&dma0
-		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-		AT91_XDMAC_DT_PERID(12)>;
-	dma-names = "tx", "rx";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clocks = <&flx0>;
-	atmel,fifo-size = <16>;
-	i2c-sda-hold-time-ns = <336>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c0>;
-	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	wm8731: wm8731@1a {
-		compatible = "wm8731";
-		reg = <0x1a>;
-	};
-};