@@ -17,7 +17,7 @@ clcd_pads: endpoint {
&fast_timer {
/* compatible = "lsi,zevio-timer"; */
- reg = <0x90010000 0x1000>, <0x900A0010 0x8>;
+ reg = <0x90010000 0x1000>, <0x900a0010 0x8>;
};
&uart {
@@ -30,12 +30,12 @@ &uart {
&timer0 {
/* compatible = "lsi,zevio-timer"; */
- reg = <0x900C0000 0x1000>, <0x900A0018 0x8>;
+ reg = <0x900c0000 0x1000>, <0x900a0018 0x8>;
};
&timer1 {
compatible = "lsi,zevio-timer";
- reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
+ reg = <0x900d0000 0x1000>, <0x900a0020 0x8>;
};
&keypad {
@@ -66,10 +66,10 @@ ahb {
#address-cells = <1>;
#size-cells = <1>;
- intc: interrupt-controller@DC000000 {
+ intc: interrupt-controller@dc000000 {
compatible = "lsi,zevio-intc";
interrupt-controller;
- reg = <0xDC000000 0x1000>;
+ reg = <0xdc000000 0x1000>;
#interrupt-cells = <1>;
};
};
@@ -92,10 +92,10 @@ ahb {
#address-cells = <1>;
#size-cells = <1>;
- intc: interrupt-controller@DC000000 {
+ intc: interrupt-controller@dc000000 {
compatible = "arm,pl190-vic";
interrupt-controller;
- reg = <0xDC000000 0x1000>;
+ reg = <0xdc000000 0x1000>;
#interrupt-cells = <1>;
};
@@ -20,9 +20,9 @@ bootrom: bootrom@0 {
reg = <0x00000000 0x80000>;
};
- sram: sram@A4000000 {
+ sram: sram@a4000000 {
device = "memory";
- reg = <0xA4000000 0x20000>;
+ reg = <0xa4000000 0x20000>;
};
timer_clk: timer_clk {
@@ -33,12 +33,12 @@ timer_clk: timer_clk {
base_clk: base_clk {
#clock-cells = <0>;
- reg = <0x900B0024 0x4>;
+ reg = <0x900b0024 0x4>;
};
ahb_clk: ahb_clk {
#clock-cells = <0>;
- reg = <0x900B0024 0x4>;
+ reg = <0x900b0024 0x4>;
clocks = <&base_clk>;
};
@@ -71,28 +71,28 @@ ahb {
#size-cells = <1>;
ranges;
- spi: spi@A9000000 {
- reg = <0xA9000000 0x1000>;
+ spi: spi@a9000000 {
+ reg = <0xa9000000 0x1000>;
};
- usb0: usb@B0000000 {
+ usb0: usb@b0000000 {
compatible = "lsi,zevio-usb";
- reg = <0xB0000000 0x1000>;
+ reg = <0xb0000000 0x1000>;
interrupts = <8>;
usb-phy = <&usb_phy>;
vbus-supply = <&vbus_reg>;
};
- usb1: usb@B4000000 {
- reg = <0xB4000000 0x1000>;
+ usb1: usb@b4000000 {
+ reg = <0xb4000000 0x1000>;
interrupts = <9>;
status = "disabled";
};
- lcd: lcd@C0000000 {
+ lcd: lcd@c0000000 {
compatible = "arm,pl111", "arm,primecell";
- reg = <0xC0000000 0x1000>;
+ reg = <0xc0000000 0x1000>;
interrupts = <21>;
/*
@@ -105,17 +105,17 @@ lcd: lcd@C0000000 {
clock-names = "clcdclk", "apb_pclk";
};
- adc: adc@C4000000 {
- reg = <0xC4000000 0x1000>;
+ adc: adc@c4000000 {
+ reg = <0xc4000000 0x1000>;
interrupts = <11>;
};
- tdes: crypto@C8010000 {
- reg = <0xC8010000 0x1000>;
+ tdes: crypto@c8010000 {
+ reg = <0xc8010000 0x1000>;
};
- sha256: crypto@CC000000 {
- reg = <0xCC000000 0x1000>;
+ sha256: crypto@cc000000 {
+ reg = <0xcc000000 0x1000>;
};
apb@90000000 {
@@ -143,16 +143,16 @@ uart: serial@90020000 {
interrupts = <1>;
};
- timer0: timer@900C0000 {
- reg = <0x900C0000 0x1000>;
+ timer0: timer@900c0000 {
+ reg = <0x900c0000 0x1000>;
clocks = <&timer_clk>, <&timer_clk>,
<&timer_clk>;
clock-names = "timer0clk", "timer1clk",
"apb_pclk";
};
- timer1: timer@900D0000 {
- reg = <0x900D0000 0x1000>;
+ timer1: timer@900d0000 {
+ reg = <0x900d0000 0x1000>;
interrupts = <19>;
clocks = <&timer_clk>, <&timer_clk>,
<&timer_clk>;
@@ -171,18 +171,18 @@ rtc: rtc@90090000 {
interrupts = <4>;
};
- misc: misc@900A0000 {
- reg = <0x900A0000 0x1000>;
+ misc: misc@900a0000 {
+ reg = <0x900a0000 0x1000>;
};
- pwr: pwr@900B0000 {
- reg = <0x900B0000 0x1000>;
+ pwr: pwr@900b0000 {
+ reg = <0x900b0000 0x1000>;
interrupts = <15>;
};
- keypad: input@900E0000 {
+ keypad: input@900e0000 {
compatible = "ti,nspire-keypad";
- reg = <0x900E0000 0x1000>;
+ reg = <0x900e0000 0x1000>;
interrupts = <16>;
scan-interval = <1000>;
@@ -191,8 +191,8 @@ keypad: input@900E0000 {
clocks = <&apb_pclk>;
};
- contrast: contrast@900F0000 {
- reg = <0x900F0000 0x1000>;
+ contrast: contrast@900f0000 {
+ reg = <0x900f0000 0x1000>;
};
led: led@90110000 {
Convert all hex addresses in node unit addresses to lower case to fix dt_binding_check and dtc W=1 warnings. Conversion was done using sed: $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm/boot/dts/nspire* $ sed -e 's/<0x\([a-zA-Z0-9_-]*\) /<0x\L\1 /g' -i arch/arm/boot/dts/nspire* Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- arch/arm/boot/dts/nspire-classic.dtsi | 10 ++--- arch/arm/boot/dts/nspire-cx.dts | 4 +- arch/arm/boot/dts/nspire.dtsi | 60 +++++++++++++-------------- 3 files changed, 37 insertions(+), 37 deletions(-)