diff mbox series

[1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and imx8mp compatible fallback

Message ID 20220323134019.3796178-1-aford173@gmail.com (mailing list archive)
State New, archived
Headers show
Series [1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and imx8mp compatible fallback | expand

Commit Message

Adam Ford March 23, 2022, 1:40 p.m. UTC
The SDHC controller in the imx8mn and imx8mp have the same controller
as the imx8mm which is slightly different than that of the imx7d.
Using the fallback of the imx8mm enables the controllers to support
HS400-ES which is not available on the imx7d.

Signed-off-by: Adam Ford <aford173@gmail.com>

Comments

Krzysztof Kozlowski March 23, 2022, 1:56 p.m. UTC | #1
On 23/03/2022 14:40, Adam Ford wrote:
> The SDHC controller in the imx8mn and imx8mp have the same controller
> as the imx8mm which is slightly different than that of the imx7d.
> Using the fallback of the imx8mm enables the controllers to support
> HS400-ES which is not available on the imx7d.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>
> 
> diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> index 7dbbcae9485c..d6ea73d76bdd 100644
> --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> @@ -39,14 +39,14 @@ properties:
>        - items:
>            - enum:
>                - fsl,imx8mm-usdhc

Your change looks reasonable, but why imx8mm is compatible with imx7d?

> -              - fsl,imx8mn-usdhc
> -              - fsl,imx8mp-usdhc
>                - fsl,imx8mq-usdhc
>                - fsl,imx8qm-usdhc
>                - fsl,imx8qxp-usdhc
>            - const: fsl,imx7d-usdhc
>        - items:
>            - enum:
> +              - fsl,imx8mn-usdhc
> +              - fsl,imx8mp-usdhc
>                - fsl,imx93-usdhc
>                - fsl,imx8ulp-usdhc
>            - const: fsl,imx8mm-usdhc


Best regards,
Krzysztof
Adam Ford March 23, 2022, 2 p.m. UTC | #2
On Wed, Mar 23, 2022 at 8:56 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On 23/03/2022 14:40, Adam Ford wrote:
> > The SDHC controller in the imx8mn and imx8mp have the same controller
> > as the imx8mm which is slightly different than that of the imx7d.
> > Using the fallback of the imx8mm enables the controllers to support
> > HS400-ES which is not available on the imx7d.
> >
> > Signed-off-by: Adam Ford <aford173@gmail.com>
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> > index 7dbbcae9485c..d6ea73d76bdd 100644
> > --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> > +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> > @@ -39,14 +39,14 @@ properties:
> >        - items:
> >            - enum:
> >                - fsl,imx8mm-usdhc
>
> Your change looks reasonable, but why imx8mm is compatible with imx7d?

I saw that, and I wasn't sure the best way to go about  fixing it.  If
I move the 8mm out of the imx7d category, do I need to add it to the
enum list associated with the imx8mm, or can I just delete it from the
enum leaving the const for imx8mm good enough?

I am not very good with YAML files yet, so please forgive my ignorance.

adam
>
> > -              - fsl,imx8mn-usdhc
> > -              - fsl,imx8mp-usdhc
> >                - fsl,imx8mq-usdhc
> >                - fsl,imx8qm-usdhc
> >                - fsl,imx8qxp-usdhc
> >            - const: fsl,imx7d-usdhc
> >        - items:
> >            - enum:
> > +              - fsl,imx8mn-usdhc
> > +              - fsl,imx8mp-usdhc
> >                - fsl,imx93-usdhc
> >                - fsl,imx8ulp-usdhc
> >            - const: fsl,imx8mm-usdhc
>
>
> Best regards,
> Krzysztof
Krzysztof Kozlowski March 23, 2022, 2:11 p.m. UTC | #3
On 23/03/2022 15:00, Adam Ford wrote:
> On Wed, Mar 23, 2022 at 8:56 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>>
>> On 23/03/2022 14:40, Adam Ford wrote:
>>> The SDHC controller in the imx8mn and imx8mp have the same controller
>>> as the imx8mm which is slightly different than that of the imx7d.
>>> Using the fallback of the imx8mm enables the controllers to support
>>> HS400-ES which is not available on the imx7d.
>>>
>>> Signed-off-by: Adam Ford <aford173@gmail.com>
>>>
>>> diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
>>> index 7dbbcae9485c..d6ea73d76bdd 100644
>>> --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
>>> +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
>>> @@ -39,14 +39,14 @@ properties:
>>>        - items:
>>>            - enum:
>>>                - fsl,imx8mm-usdhc
>>
>> Your change looks reasonable, but why imx8mm is compatible with imx7d?
> 
> I saw that, and I wasn't sure the best way to go about  fixing it.  If
> I move the 8mm out of the imx7d category, do I need to add it to the
> enum list associated with the imx8mm, or can I just delete it from the
> enum leaving the const for imx8mm good enough?
> 

The DTS is using:
  compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"
which looks incorrect, based on what you wrote in commit description.
Since fsl,imx8mm-usdhc has its own compatibility-group and defines the
properties for entire family (imx8mm + imx8mn + imx8mp), then I would
assume that either fsl,imx8mm-usdhc is not be compatible with imx7d or
everything is compatible with imx7d. IOW, DTS and bindings should be
changed to one of following:
1. Everything compatible with imx7d:
  compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
  compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";

2. A new group:
  compatible = "fsl,imx8mm-usdhc";
  compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc";

Which one, I am not sure. My commit 80fd350b95 organized it in (1)
approach, because also that time there was no new group for 8mm (added
in commit 431fae8). I assume NXP engineer knows better, so the better
solution would be (2). In such case, imx8mm has to be moved to the first
enum and all DTS have to be adjusted.


Best regards,
Krzysztof
Adam Ford March 23, 2022, 5:23 p.m. UTC | #4
On Wed, Mar 23, 2022 at 9:11 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On 23/03/2022 15:00, Adam Ford wrote:
> > On Wed, Mar 23, 2022 at 8:56 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
> >>
> >> On 23/03/2022 14:40, Adam Ford wrote:
> >>> The SDHC controller in the imx8mn and imx8mp have the same controller
> >>> as the imx8mm which is slightly different than that of the imx7d.
> >>> Using the fallback of the imx8mm enables the controllers to support
> >>> HS400-ES which is not available on the imx7d.
> >>>
> >>> Signed-off-by: Adam Ford <aford173@gmail.com>
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> >>> index 7dbbcae9485c..d6ea73d76bdd 100644
> >>> --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> >>> +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> >>> @@ -39,14 +39,14 @@ properties:
> >>>        - items:
> >>>            - enum:
> >>>                - fsl,imx8mm-usdhc
> >>
> >> Your change looks reasonable, but why imx8mm is compatible with imx7d?
> >
> > I saw that, and I wasn't sure the best way to go about  fixing it.  If
> > I move the 8mm out of the imx7d category, do I need to add it to the
> > enum list associated with the imx8mm, or can I just delete it from the
> > enum leaving the const for imx8mm good enough?
> >
>
> The DTS is using:
>   compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"
> which looks incorrect, based on what you wrote in commit description.
> Since fsl,imx8mm-usdhc has its own compatibility-group and defines the
> properties for entire family (imx8mm + imx8mn + imx8mp), then I would
> assume that either fsl,imx8mm-usdhc is not be compatible with imx7d or
> everything is compatible with imx7d. IOW, DTS and bindings should be
> changed to one of following:
> 1. Everything compatible with imx7d:
>   compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
>   compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
>
> 2. A new group:
>   compatible = "fsl,imx8mm-usdhc";
>   compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc";
>
> Which one, I am not sure. My commit 80fd350b95 organized it in (1)
> approach, because also that time there was no new group for 8mm (added
> in commit 431fae8). I assume NXP engineer knows better, so the better
> solution would be (2). In such case, imx8mm has to be moved to the first
> enum and all DTS have to be adjusted.

I pulled NXP's downtream kernel based on 5.15.y, and grepped the code
for imx8mm-usdhc.  It looks like the imx8mm, imx8mn, imx8mp, and
imx8ulp use the imx8mm compatible flag.
The imx8mq uses the older imx7d.  I'll do a second revision later
today or tomorrow.  Looking inside the driver, it appears there are
some other quirks that different between the imx7d and imx8mm beyond
just support for HS400-ES, so I think your option 2 is appropriate.
Hopefully someone from NXP can comment.

adam
>
>
> Best regards,
> Krzysztof
Bough Chen March 24, 2022, 2:54 a.m. UTC | #5
> -----Original Message-----
> From: Adam Ford [mailto:aford173@gmail.com]
> Sent: 2022年3月24日 1:23
> To: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: arm-soc <linux-arm-kernel@lists.infradead.org>; Adam Ford-BE
> <aford@beaconembedded.com>; Ulf Hansson <ulf.hansson@linaro.org>; Rob
> Herring <robh+dt@kernel.org>; Krzysztof Kozlowski <krzk+dt@kernel.org>;
> Shawn Guo <shawnguo@kernel.org>; Sascha Hauer
> <s.hauer@pengutronix.de>; Pengutronix Kernel Team
> <kernel@pengutronix.de>; Fabio Estevam <festevam@gmail.com>;
> dl-linux-imx <linux-imx@nxp.com>; linux-mmc <linux-mmc@vger.kernel.org>;
> devicetree <devicetree@vger.kernel.org>; Linux Kernel Mailing List
> <linux-kernel@vger.kernel.org>
> Subject: Re: [PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and
> imx8mp compatible fallback
> 
> On Wed, Mar 23, 2022 at 9:11 AM Krzysztof Kozlowski <krzk@kernel.org>
> wrote:
> >
> > On 23/03/2022 15:00, Adam Ford wrote:
> > > On Wed, Mar 23, 2022 at 8:56 AM Krzysztof Kozlowski <krzk@kernel.org>
> wrote:
> > >>
> > >> On 23/03/2022 14:40, Adam Ford wrote:
> > >>> The SDHC controller in the imx8mn and imx8mp have the same
> > >>> controller as the imx8mm which is slightly different than that of the
> imx7d.
> > >>> Using the fallback of the imx8mm enables the controllers to
> > >>> support HS400-ES which is not available on the imx7d.
> > >>>
> > >>> Signed-off-by: Adam Ford <aford173@gmail.com>
> > >>>
> > >>> diff --git
> > >>> a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> > >>> b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> > >>> index 7dbbcae9485c..d6ea73d76bdd 100644
> > >>> --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> > >>> +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> > >>> @@ -39,14 +39,14 @@ properties:
> > >>>        - items:
> > >>>            - enum:
> > >>>                - fsl,imx8mm-usdhc
> > >>
> > >> Your change looks reasonable, but why imx8mm is compatible with imx7d?
> > >
> > > I saw that, and I wasn't sure the best way to go about  fixing it.
> > > If I move the 8mm out of the imx7d category, do I need to add it to
> > > the enum list associated with the imx8mm, or can I just delete it
> > > from the enum leaving the const for imx8mm good enough?
> > >
> >
> > The DTS is using:
> >   compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"
> > which looks incorrect, based on what you wrote in commit description.
> > Since fsl,imx8mm-usdhc has its own compatibility-group and defines the
> > properties for entire family (imx8mm + imx8mn + imx8mp), then I would
> > assume that either fsl,imx8mm-usdhc is not be compatible with imx7d or
> > everything is compatible with imx7d. IOW, DTS and bindings should be
> > changed to one of following:
> > 1. Everything compatible with imx7d:
> >   compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
> >   compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc",
> > "fsl,imx7d-usdhc";
> >
> > 2. A new group:
> >   compatible = "fsl,imx8mm-usdhc";
> >   compatible = "fsl,imx8mq-usdhc", "fsl,imx8mm-usdhc";
> >
> > Which one, I am not sure. My commit 80fd350b95 organized it in (1)
> > approach, because also that time there was no new group for 8mm (added
> > in commit 431fae8). I assume NXP engineer knows better, so the better
> > solution would be (2). In such case, imx8mm has to be moved to the
> > first enum and all DTS have to be adjusted.
> 
> I pulled NXP's downtream kernel based on 5.15.y, and grepped the code for
> imx8mm-usdhc.  It looks like the imx8mm, imx8mn, imx8mp, and imx8ulp use
> the imx8mm compatible flag.
> The imx8mq uses the older imx7d.  I'll do a second revision later today or
> tomorrow.  Looking inside the driver, it appears there are some other quirks
> that different between the imx7d and imx8mm beyond just support for
> HS400-ES, so I think your option 2 is appropriate.
> Hopefully someone from NXP can comment.
> 

I think better to change like this, and dts need change accordingly.

  compatible:
    oneOf:
      - enum:
          - fsl,imx25-esdhc
          - fsl,imx35-esdhc
          - fsl,imx51-esdhc
          - fsl,imx53-esdhc
          - fsl,imx6q-usdhc
          - fsl,imx6sl-usdhc
          - fsl,imx6sll-usdhc
          - fsl,imx6sx-usdhc
          - fsl,imx6ull-usdhc
          - fsl,imx7d-usdhc
          - fsl,imx7ulp-usdhc
          - fsl,imxrt1050-usdhc
          - fsl,imx8mm-usdhc
          - fsl,imx8qxp-usdhc
          - nxp,s32g2-usdhc
      - items:
          - enum:
              - fsl,imx8mq-usdhc
          - const: fsl,imx7d-usdhc
      - items:
          - enum:
              - fsl,imx93-usdhc
              - fsl,imx8ulp-usdhc
              - fsl,imx8mn-usdhc
              - fsl,imx8mp-usdhc
          - const: fsl,imx8mm-usdhc
      - items:
          - enum:
              - fsl,imx8qm-usdhc
          - const: fsl,imx8qxp-usdhc


Best Regards
Haibo Chen

> adam
> >
> >
> > Best regards,
> > Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
index 7dbbcae9485c..d6ea73d76bdd 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
@@ -39,14 +39,14 @@  properties:
       - items:
           - enum:
               - fsl,imx8mm-usdhc
-              - fsl,imx8mn-usdhc
-              - fsl,imx8mp-usdhc
               - fsl,imx8mq-usdhc
               - fsl,imx8qm-usdhc
               - fsl,imx8qxp-usdhc
           - const: fsl,imx7d-usdhc
       - items:
           - enum:
+              - fsl,imx8mn-usdhc
+              - fsl,imx8mp-usdhc
               - fsl,imx93-usdhc
               - fsl,imx8ulp-usdhc
           - const: fsl,imx8mm-usdhc