| Message ID | 20220331141323.194355-2-claudiu.beznea@microchip.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name | expand |
On 31/03/2022 at 16:13, Claudiu Beznea wrote: > Commit bf781869e5cf ("ARM: dts: at91: add pinctrl-{names, 0} for all > gpios") introduces pinctrl phandles for pins used by individual > controllers to avoid failures due to commit 2ab73c6d8323 ("gpio: > Support GPIO controllers without pin-ranges"). For SPI controllers > available on SAMA5D4 and SAMA5D3 some of the pins are defined in > SoC specific dtsi on behalf of pinctrl-0. Adding extra pinctrl phandles > on board specific dts also on behalf of pinctrl-0 overwrite the pinctrl-0 > phandle specified in SoC specific dtsi. Thus add the board specific > pinctrl to pinctrl-1. > > Fixes: bf781869e5cf ("ARM: dts: at91: add pinctrl-{names, 0} for all gpios") > Depends-on: e8042102d11e ("ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name") > Reported-by: Ajay Kathat <ajay.kathat@microchip.com> > Co-developed-by: Ajay Kathat <ajay.kathat@microchip.com> > Signed-off-by: Ajay Kathat <ajay.kathat@microchip.com> > Tested-by: Ajay Kathat <ajay.kathat@microchip.com> > Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> For the 2 patches: Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> > --- > > Hi, Nicolas, > > If all good with this patches please update the SHA1 on "Depends-on" > tag. Yes, sure. I did it on the "fixes" branch queued for 5.18. Thanks, best regards, Nicolas > arch/arm/boot/dts/at91-sama5d3_xplained.dts | 8 ++++---- > arch/arm/boot/dts/at91-sama5d4_xplained.dts | 4 ++-- > 2 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts > index d72c042f2850..a49c2966b41e 100644 > --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts > +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts > @@ -57,8 +57,8 @@ slot@0 { > }; > > spi0: spi@f0004000 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pinctrl_spi0_cs>; > + pinctrl-names = "default", "cs"; > + pinctrl-1 = <&pinctrl_spi0_cs>; > cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; > status = "okay"; > }; > @@ -171,8 +171,8 @@ slot@0 { > }; > > spi1: spi@f8008000 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pinctrl_spi1_cs>; > + pinctrl-names = "default", "cs"; > + pinctrl-1 = <&pinctrl_spi1_cs>; > cs-gpios = <&pioC 25 0>; > status = "okay"; > }; > diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts > index accb92cfac44..e519d2747936 100644 > --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts > +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts > @@ -81,8 +81,8 @@ usart4: serial@fc010000 { > }; > > spi1: spi@fc018000 { > - pinctrl-names = "default"; > - pinctrl-0 = <&pinctrl_spi1_cs>; > + pinctrl-names = "default", "cs"; > + pinctrl-1 = <&pinctrl_spi1_cs>; > cs-gpios = <&pioB 21 0>; > status = "okay"; > };
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index d72c042f2850..a49c2966b41e 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -57,8 +57,8 @@ slot@0 { }; spi0: spi@f0004000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi0_cs>; + pinctrl-names = "default", "cs"; + pinctrl-1 = <&pinctrl_spi0_cs>; cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; status = "okay"; }; @@ -171,8 +171,8 @@ slot@0 { }; spi1: spi@f8008000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi1_cs>; + pinctrl-names = "default", "cs"; + pinctrl-1 = <&pinctrl_spi1_cs>; cs-gpios = <&pioC 25 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index accb92cfac44..e519d2747936 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -81,8 +81,8 @@ usart4: serial@fc010000 { }; spi1: spi@fc018000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi1_cs>; + pinctrl-names = "default", "cs"; + pinctrl-1 = <&pinctrl_spi1_cs>; cs-gpios = <&pioB 21 0>; status = "okay"; };
Commit bf781869e5cf ("ARM: dts: at91: add pinctrl-{names, 0} for all gpios") introduces pinctrl phandles for pins used by individual controllers to avoid failures due to commit 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges"). For SPI controllers available on SAMA5D4 and SAMA5D3 some of the pins are defined in SoC specific dtsi on behalf of pinctrl-0. Adding extra pinctrl phandles on board specific dts also on behalf of pinctrl-0 overwrite the pinctrl-0 phandle specified in SoC specific dtsi. Thus add the board specific pinctrl to pinctrl-1. Fixes: bf781869e5cf ("ARM: dts: at91: add pinctrl-{names, 0} for all gpios") Depends-on: e8042102d11e ("ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name") Reported-by: Ajay Kathat <ajay.kathat@microchip.com> Co-developed-by: Ajay Kathat <ajay.kathat@microchip.com> Signed-off-by: Ajay Kathat <ajay.kathat@microchip.com> Tested-by: Ajay Kathat <ajay.kathat@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- Hi, Nicolas, If all good with this patches please update the SHA1 on "Depends-on" tag. Thank you, Claudiu Beznea arch/arm/boot/dts/at91-sama5d3_xplained.dts | 8 ++++---- arch/arm/boot/dts/at91-sama5d4_xplained.dts | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-)