diff mbox series

[v6,33/34] iommu/mediatek: Backup/restore regsiters for multi banks

Message ID 20220407075726.17771-34-yong.wu@mediatek.com (mailing list archive)
State New, archived
Headers show
Series MT8195 IOMMU SUPPORT | expand

Commit Message

Yong Wu (吴勇) April 7, 2022, 7:57 a.m. UTC
Each bank has some independent registers. thus backup/restore them for
each a bank when suspend and resume.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/iommu/mtk_iommu.c | 46 ++++++++++++++++++++++++++-------------
 1 file changed, 31 insertions(+), 15 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 028dc642a31e..027bbbced80d 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -173,11 +173,12 @@  struct mtk_iommu_suspend_reg {
 	u32			misc_ctrl;
 	u32			dcm_dis;
 	u32			ctrl_reg;
-	u32			int_control0;
-	u32			int_main_control;
-	u32			ivrp_paddr;
 	u32			vld_pa_rng;
 	u32			wr_len_ctrl;
+
+	u32			int_control[MTK_IOMMU_BANK_MAX];
+	u32			int_main_control[MTK_IOMMU_BANK_MAX];
+	u32			ivrp_paddr[MTK_IOMMU_BANK_MAX];
 };
 
 struct mtk_iommu_plat_data {
@@ -1292,16 +1293,23 @@  static int __maybe_unused mtk_iommu_runtime_suspend(struct device *dev)
 {
 	struct mtk_iommu_data *data = dev_get_drvdata(dev);
 	struct mtk_iommu_suspend_reg *reg = &data->reg;
-	void __iomem *base = data->bank[0].base;
+	void __iomem *base;
+	int i = 0;
 
+	base = data->bank[i].base;
 	reg->wr_len_ctrl = readl_relaxed(base + REG_MMU_WR_LEN_CTRL);
 	reg->misc_ctrl = readl_relaxed(base + REG_MMU_MISC_CTRL);
 	reg->dcm_dis = readl_relaxed(base + REG_MMU_DCM_DIS);
 	reg->ctrl_reg = readl_relaxed(base + REG_MMU_CTRL_REG);
-	reg->int_control0 = readl_relaxed(base + REG_MMU_INT_CONTROL0);
-	reg->int_main_control = readl_relaxed(base + REG_MMU_INT_MAIN_CONTROL);
-	reg->ivrp_paddr = readl_relaxed(base + REG_MMU_IVRP_PADDR);
 	reg->vld_pa_rng = readl_relaxed(base + REG_MMU_VLD_PA_RNG);
+	do {
+		if (!data->plat_data->banks_enable[i])
+			continue;
+		base = data->bank[i].base;
+		reg->int_control[i] = readl_relaxed(base + REG_MMU_INT_CONTROL0);
+		reg->int_main_control[i] = readl_relaxed(base + REG_MMU_INT_MAIN_CONTROL);
+		reg->ivrp_paddr[i] = readl_relaxed(base + REG_MMU_IVRP_PADDR);
+	} while (++i < data->plat_data->banks_num);
 	clk_disable_unprepare(data->bclk);
 	return 0;
 }
@@ -1310,9 +1318,9 @@  static int __maybe_unused mtk_iommu_runtime_resume(struct device *dev)
 {
 	struct mtk_iommu_data *data = dev_get_drvdata(dev);
 	struct mtk_iommu_suspend_reg *reg = &data->reg;
-	struct mtk_iommu_domain *m4u_dom = data->bank[0].m4u_dom;
-	void __iomem *base = data->bank[0].base;
-	int ret;
+	struct mtk_iommu_domain *m4u_dom;
+	void __iomem *base;
+	int ret, i = 0;
 
 	ret = clk_prepare_enable(data->bclk);
 	if (ret) {
@@ -1324,18 +1332,26 @@  static int __maybe_unused mtk_iommu_runtime_resume(struct device *dev)
 	 * Uppon first resume, only enable the clk and return, since the values of the
 	 * registers are not yet set.
 	 */
-	if (!m4u_dom)
+	if (!reg->wr_len_ctrl)
 		return 0;
 
+	base = data->bank[i].base;
 	writel_relaxed(reg->wr_len_ctrl, base + REG_MMU_WR_LEN_CTRL);
 	writel_relaxed(reg->misc_ctrl, base + REG_MMU_MISC_CTRL);
 	writel_relaxed(reg->dcm_dis, base + REG_MMU_DCM_DIS);
 	writel_relaxed(reg->ctrl_reg, base + REG_MMU_CTRL_REG);
-	writel_relaxed(reg->int_control0, base + REG_MMU_INT_CONTROL0);
-	writel_relaxed(reg->int_main_control, base + REG_MMU_INT_MAIN_CONTROL);
-	writel_relaxed(reg->ivrp_paddr, base + REG_MMU_IVRP_PADDR);
 	writel_relaxed(reg->vld_pa_rng, base + REG_MMU_VLD_PA_RNG);
-	writel(m4u_dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK, base + REG_MMU_PT_BASE_ADDR);
+	do {
+		m4u_dom = data->bank[i].m4u_dom;
+		if (!data->plat_data->banks_enable[i] || !m4u_dom)
+			continue;
+		base = data->bank[i].base;
+		writel_relaxed(reg->int_control[i], base + REG_MMU_INT_CONTROL0);
+		writel_relaxed(reg->int_main_control[i], base + REG_MMU_INT_MAIN_CONTROL);
+		writel_relaxed(reg->ivrp_paddr[i], base + REG_MMU_IVRP_PADDR);
+		writel(m4u_dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK,
+		       base + REG_MMU_PT_BASE_ADDR);
+	} while (++i < data->plat_data->banks_num);
 
 	/*
 	 * Users may allocate dma buffer before they call pm_runtime_get,