diff mbox series

[v1,07/17] arm: dts: imx6qdl-vicut1.dtsi: Update GPIO line names

Message ID 20220412074004.2485264-8-o.rempel@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series protonic fixes | expand

Commit Message

Oleksij Rempel April 12, 2022, 7:39 a.m. UTC 
From: David Jander <david@protonic.nl>

Add some missing names and remove names to pins that have never been used
and/or are not present on any hardware.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index a5f962f1028b..a93e7f8302aa 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -257,12 +257,10 @@  &gpio1 {
 	gpio-line-names =
 		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
 			"CAM2_MIRROR", "", "", "SMBALERT",
-		"DEBUG_0", "DEBUG_1", "SDIO_SCK", "SDIO_CMD", "SDIO_D3",
-			"SDIO_D2", "SDIO_D1", "SDIO_D0",
+		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
 		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
-			"SD1_DATA3", "", "",
-		"", "ETH_RESET", "WIFI_PD", "WIFI_BT_RST", "ETH_INT", "",
-			"WL_IRQ", "ETH_MDC";
+			"SD1_DATA3", "ETH_MDIO", "",
+		"", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC";
 };
 
 &gpio2 {
@@ -270,8 +268,8 @@  &gpio2 {
 		"YACO_WHEEL", "YACO_RADAR", "YACO_PTO", "", "", "", "", "",
 		"", "LED_PWM", "", "", "",
 			"", "", "",
-		"", "", "", "", "", "", "", "ON_SWITCH",
-		"POWER_LED", "", "ECSPI2_SS0", "", "", "", "", "";
+		"", "", "", "", "", "ISB_IN2", "ISB_nIN1", "ON_SWITCH",
+		"POWER_LED", "", "", "", "", "", "", "";
 };
 
 &gpio3 {
@@ -280,7 +278,8 @@  &gpio3 {
 		"", "", "", "", "", "", "", "",
 		"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
 			"CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ",
-		"", "", "", "", "", "", "", "";
+		"TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
+			"YACO_RESET";
 };
 
 &gpio4 {
@@ -288,8 +287,8 @@  &gpio4 {
 		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
 		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
 			"CAN2_SR", "CAN2_TX", "CAN2_RX",
-		"LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "", "", "", "ON1_CTRL",
-			"ON2_CTRL", "HITCH_IN_OUT",
+		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
+			"HITCH_IN_OUT",
 		"LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "",
 			"ISB_LED";
 };