| Message ID | 20220415153708.637804-3-paul.kocialkowski@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Allwinner A31/A83T MIPI CSI-2 and A31 ISP / ISP Driver | expand |
On Fri, Apr 15, 2022 at 05:37:06PM +0200, Paul Kocialkowski wrote: > Some Allwinner devices come with an Image Signal Processor (ISP) that > allows processing camera data to produce good-looking images, > especially from raw bayer representations. > > The ISP does not have a dedicated capture path: it is fed directly by > one of the CSI controllers, which can be selected at run-time. > > Represent this possibility as a graph connection between the CSI > controller and the ISP in the device-tree bindings. > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> > --- > .../bindings/media/allwinner,sun6i-a31-csi.yaml | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml > index 53aa6dbe8e2c..1b41a6008195 100644 > --- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml > +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml > @@ -87,6 +87,20 @@ properties: > > additionalProperties: false > > + port@2: > + $ref: /schemas/graph.yaml#/$defs/port-base If there are not any custom properties, then use '/schemas/graph.yaml#/properties/port' and drop the 'properties' below. > + description: ISP output port > + > + properties: > + reg: > + const: 2 > + > + endpoint: > + $ref: /schemas/graph.yaml#/$defs/endpoint-base > + unevaluatedProperties: false > + > + additionalProperties: false > + > anyOf: > - required: > - port@0 > -- > 2.35.2 > >
Hi Rob, On Tue 19 Apr 22, 08:08, Rob Herring wrote: > On Fri, Apr 15, 2022 at 05:37:06PM +0200, Paul Kocialkowski wrote: > > Some Allwinner devices come with an Image Signal Processor (ISP) that > > allows processing camera data to produce good-looking images, > > especially from raw bayer representations. > > > > The ISP does not have a dedicated capture path: it is fed directly by > > one of the CSI controllers, which can be selected at run-time. > > > > Represent this possibility as a graph connection between the CSI > > controller and the ISP in the device-tree bindings. > > > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> > > --- > > .../bindings/media/allwinner,sun6i-a31-csi.yaml | 14 ++++++++++++++ > > 1 file changed, 14 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml > > index 53aa6dbe8e2c..1b41a6008195 100644 > > --- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml > > +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml > > @@ -87,6 +87,20 @@ properties: > > > > additionalProperties: false > > > > + port@2: > > + $ref: /schemas/graph.yaml#/$defs/port-base > > If there are not any custom properties, then use > '/schemas/graph.yaml#/properties/port' and drop the 'properties' below. That's right, nothing specific about it. It just represents an internal FIFO between the different blocks. Thanks, I think this also applies to a number of other bindings I submitted in these series. Paul > > + description: ISP output port > > + > > + properties: > > + reg: > > + const: 2 > > + > > + endpoint: > > + $ref: /schemas/graph.yaml#/$defs/endpoint-base > > + unevaluatedProperties: false > > + > > + additionalProperties: false > > + > > anyOf: > > - required: > > - port@0 > > -- > > 2.35.2 > > > >
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml index 53aa6dbe8e2c..1b41a6008195 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml @@ -87,6 +87,20 @@ properties: additionalProperties: false + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + description: ISP output port + + properties: + reg: + const: 2 + + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + additionalProperties: false + anyOf: - required: - port@0
Some Allwinner devices come with an Image Signal Processor (ISP) that allows processing camera data to produce good-looking images, especially from raw bayer representations. The ISP does not have a dedicated capture path: it is fed directly by one of the CSI controllers, which can be selected at run-time. Represent this possibility as a graph connection between the CSI controller and the ISP in the device-tree bindings. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> --- .../bindings/media/allwinner,sun6i-a31-csi.yaml | 14 ++++++++++++++ 1 file changed, 14 insertions(+)