Message ID | 20220418082738.11301-6-ychuang3@nuvoton.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Add initial support for MA35D1 SoC | expand |
On 18/04/2022 10:27, Jacky Huang wrote: > +properties: > + $nodename: > + const: '/' > + compatible: > + items: > + - enum: > + - nuvoton,ma35d1 > + - nuvoton,ma35d1-evb > + - nuvoton,ma35d1-iot > + - nuvoton,ma35d1-som512 > + - nuvoton,ma35d1-som1g This does not match your DTS and does not look reasonable (SoC compatible should not be part of this enum). Check some other board bindings for examples. Best regards, Krzysztof
On 2022/4/18 下午 08:11, Krzysztof Kozlowski wrote: > On 18/04/2022 10:27, Jacky Huang wrote: >> +properties: >> + $nodename: >> + const: '/' >> + compatible: >> + items: >> + - enum: >> + - nuvoton,ma35d1 >> + - nuvoton,ma35d1-evb >> + - nuvoton,ma35d1-iot >> + - nuvoton,ma35d1-som512 >> + - nuvoton,ma35d1-som1g > This does not match your DTS and does not look reasonable (SoC > compatible should not be part of this enum). Check some other board > bindings for examples. > > > Best regards, > Krzysztof I would like to modify it as follows: description: | Boards with an ARMv8 based Nuvoton SoC shall have the following properties. properties: $nodename: const: '/' compatible: oneOf: - description: MA35D1 evaluation board items: - const: nuvoton,ma35d1-evb - const: nuvoton,ma35d1 - description: MA35D1 IoT board items: - const: nuvoton,ma35d1-iot - const: nuvoton,ma35d1 - description: MA35D1 SOM board with 512MB DDR items: - const: nuvoton,ma35d1-som512 - const: nuvoton,ma35d1 - description: MA35D1 SOM board with 1GB DDR items: - const: nuvoton,ma35d1-som1g - const: nuvoton,ma35d1 additionalProperties: true Thank you very much. Jacky Huang
On 21/04/2022 08:39, Jacky Huang wrote: > > > On 2022/4/18 下午 08:11, Krzysztof Kozlowski wrote: >> On 18/04/2022 10:27, Jacky Huang wrote: >>> +properties: >>> + $nodename: >>> + const: '/' >>> + compatible: >>> + items: >>> + - enum: >>> + - nuvoton,ma35d1 >>> + - nuvoton,ma35d1-evb >>> + - nuvoton,ma35d1-iot >>> + - nuvoton,ma35d1-som512 >>> + - nuvoton,ma35d1-som1g >> This does not match your DTS and does not look reasonable (SoC >> compatible should not be part of this enum). Check some other board >> bindings for examples. >> >> >> Best regards, >> Krzysztof > > I would like to modify it as follows: > > description: | > Boards with an ARMv8 based Nuvoton SoC shall have the following > properties. > > properties: > $nodename: > const: '/' > compatible: > oneOf: > > - description: MA35D1 evaluation board > items: > - const: nuvoton,ma35d1-evb > - const: nuvoton,ma35d1 > > - description: MA35D1 IoT board > items: > - const: nuvoton,ma35d1-iot Instead just enum with all board compatibles. > > Thank you very much. > Jacky Huang > Best regards, Krzysztof
On 2022/4/21 下午 02:56, Krzysztof Kozlowski wrote: > On 21/04/2022 08:39, Jacky Huang wrote: >> >> On 2022/4/18 下午 08:11, Krzysztof Kozlowski wrote: >>> On 18/04/2022 10:27, Jacky Huang wrote: >>>> +properties: >>>> + $nodename: >>>> + const: '/' >>>> + compatible: >>>> + items: >>>> + - enum: >>>> + - nuvoton,ma35d1 >>>> + - nuvoton,ma35d1-evb >>>> + - nuvoton,ma35d1-iot >>>> + - nuvoton,ma35d1-som512 >>>> + - nuvoton,ma35d1-som1g >>> This does not match your DTS and does not look reasonable (SoC >>> compatible should not be part of this enum). Check some other board >>> bindings for examples. >>> >>> >>> Best regards, >>> Krzysztof >> I would like to modify it as follows: >> >> description: | >> Boards with an ARMv8 based Nuvoton SoC shall have the following >> properties. >> >> properties: >> $nodename: >> const: '/' >> compatible: >> oneOf: >> >> - description: MA35D1 evaluation board >> items: >> - const: nuvoton,ma35d1-evb >> - const: nuvoton,ma35d1 >> >> - description: MA35D1 IoT board >> items: >> - const: nuvoton,ma35d1-iot > Instead just enum with all board compatibles. How about to modify it as the follows: compatible: oneOf: - description: MA35D1 evaluation board items: - enum: - nuvoton,ma35d1-evb - const: nuvoton,ma35d1 - description: MA35D1 IoT board items: - enum: - nuvoton,ma35d1-iot - const: nuvoton,ma35d1 - description: MA35D1 SOM board items: - enum: - nuvoton,ma35d1-som512 - nuvoton,ma35d1-som1g - const: nuvoton,ma35d1 >> Thank you very much. >> Jacky Huang >> > > Best regards, > Krzysztof Sincerely, Jacky Huang
On 21/04/2022 10:04, Jacky Huang wrote: > > > On 2022/4/21 下午 02:56, Krzysztof Kozlowski wrote: >> On 21/04/2022 08:39, Jacky Huang wrote: >>> >>> On 2022/4/18 下午 08:11, Krzysztof Kozlowski wrote: >>>> On 18/04/2022 10:27, Jacky Huang wrote: >>>>> +properties: >>>>> + $nodename: >>>>> + const: '/' >>>>> + compatible: >>>>> + items: >>>>> + - enum: >>>>> + - nuvoton,ma35d1 >>>>> + - nuvoton,ma35d1-evb >>>>> + - nuvoton,ma35d1-iot >>>>> + - nuvoton,ma35d1-som512 >>>>> + - nuvoton,ma35d1-som1g >>>> This does not match your DTS and does not look reasonable (SoC >>>> compatible should not be part of this enum). Check some other board >>>> bindings for examples. >>>> >>>> >>>> Best regards, >>>> Krzysztof >>> I would like to modify it as follows: >>> >>> description: | >>> Boards with an ARMv8 based Nuvoton SoC shall have the following >>> properties. >>> >>> properties: >>> $nodename: >>> const: '/' >>> compatible: >>> oneOf: >>> >>> - description: MA35D1 evaluation board >>> items: >>> - const: nuvoton,ma35d1-evb >>> - const: nuvoton,ma35d1 >>> >>> - description: MA35D1 IoT board >>> items: >>> - const: nuvoton,ma35d1-iot >> Instead just enum with all board compatibles. > > How about to modify it as the follows: > > compatible: > oneOf: > > - description: MA35D1 evaluation board > items: > - enum: > - nuvoton,ma35d1-evb > - const: nuvoton,ma35d1 > > - description: MA35D1 IoT board > items: > - enum: > - nuvoton,ma35d1-iot > - const: nuvoton,ma35d1 > > - description: MA35D1 SOM board > items: > - enum: > - nuvoton,ma35d1-som512 > - nuvoton,ma35d1-som1g > - const: nuvoton,ma35d1 > It's still almost the same. All boards together. You can add a comment next to the compatible if you want some user-friendly name. Best regards, Krzysztof
On 2022/4/21 下午 04:05, Krzysztof Kozlowski wrote: > On 21/04/2022 10:04, Jacky Huang wrote: >> >> On 2022/4/21 下午 02:56, Krzysztof Kozlowski wrote: >>> On 21/04/2022 08:39, Jacky Huang wrote: >>>> On 2022/4/18 下午 08:11, Krzysztof Kozlowski wrote: >>>>> On 18/04/2022 10:27, Jacky Huang wrote: >>>>>> +properties: >>>>>> + $nodename: >>>>>> + const: '/' >>>>>> + compatible: >>>>>> + items: >>>>>> + - enum: >>>>>> + - nuvoton,ma35d1 >>>>>> + - nuvoton,ma35d1-evb >>>>>> + - nuvoton,ma35d1-iot >>>>>> + - nuvoton,ma35d1-som512 >>>>>> + - nuvoton,ma35d1-som1g >>>>> This does not match your DTS and does not look reasonable (SoC >>>>> compatible should not be part of this enum). Check some other board >>>>> bindings for examples. >>>>> >>>>> >>>>> Best regards, >>>>> Krzysztof >>>> I would like to modify it as follows: >>>> >>>> description: | >>>> Boards with an ARMv8 based Nuvoton SoC shall have the following >>>> properties. >>>> >>>> properties: >>>> $nodename: >>>> const: '/' >>>> compatible: >>>> oneOf: >>>> >>>> - description: MA35D1 evaluation board >>>> items: >>>> - const: nuvoton,ma35d1-evb >>>> - const: nuvoton,ma35d1 >>>> >>>> - description: MA35D1 IoT board >>>> items: >>>> - const: nuvoton,ma35d1-iot >>> Instead just enum with all board compatibles. >> How about to modify it as the follows: >> >> compatible: >> oneOf: >> >> - description: MA35D1 evaluation board >> items: >> - enum: >> - nuvoton,ma35d1-evb >> - const: nuvoton,ma35d1 >> >> - description: MA35D1 IoT board >> items: >> - enum: >> - nuvoton,ma35d1-iot >> - const: nuvoton,ma35d1 >> >> - description: MA35D1 SOM board >> items: >> - enum: >> - nuvoton,ma35d1-som512 >> - nuvoton,ma35d1-som1g >> - const: nuvoton,ma35d1 >> > It's still almost the same. All boards together. You can add a comment > next to the compatible if you want some user-friendly name. > > > Best regards, > Krzysztof OK, I got it. Like this, compatible: oneOf: - description: MA35D1 based boards items: - enum: - nuvoton,ma35d1-evb - nuvoton,ma35d1-iot - nuvoton,ma35d1-som512 - nuvoton,ma35d1-som1g - const: nuvoton,ma35d1 Sincerely, Jacky Huang
On 21/04/2022 10:13, Jacky Huang wrote: > OK, I got it. Like this, > > compatible: > oneOf: > > - description: MA35D1 based boards > items: > - enum: > - nuvoton,ma35d1-evb > - nuvoton,ma35d1-iot > - nuvoton,ma35d1-som512 > - nuvoton,ma35d1-som1g > - const: nuvoton,ma35d1 Yes, exactly. Thank you. Best regards, Krzysztof
On Thu, Apr 21, 2022 at 04:13:20PM +0800, Jacky Huang wrote: > > > On 2022/4/21 下午 04:05, Krzysztof Kozlowski wrote: > > On 21/04/2022 10:04, Jacky Huang wrote: > > > > > > On 2022/4/21 下午 02:56, Krzysztof Kozlowski wrote: > > > > On 21/04/2022 08:39, Jacky Huang wrote: > > > > > On 2022/4/18 下午 08:11, Krzysztof Kozlowski wrote: > > > > > > On 18/04/2022 10:27, Jacky Huang wrote: > > > > > > > +properties: > > > > > > > + $nodename: > > > > > > > + const: '/' > > > > > > > + compatible: > > > > > > > + items: > > > > > > > + - enum: > > > > > > > + - nuvoton,ma35d1 > > > > > > > + - nuvoton,ma35d1-evb > > > > > > > + - nuvoton,ma35d1-iot > > > > > > > + - nuvoton,ma35d1-som512 > > > > > > > + - nuvoton,ma35d1-som1g > > > > > > This does not match your DTS and does not look reasonable (SoC > > > > > > compatible should not be part of this enum). Check some other board > > > > > > bindings for examples. > > > > > > > > > > > > > > > > > > Best regards, > > > > > > Krzysztof > > > > > I would like to modify it as follows: > > > > > > > > > > description: | > > > > > Boards with an ARMv8 based Nuvoton SoC shall have the following > > > > > properties. > > > > > > > > > > properties: > > > > > $nodename: > > > > > const: '/' > > > > > compatible: > > > > > oneOf: > > > > > > > > > > - description: MA35D1 evaluation board > > > > > items: > > > > > - const: nuvoton,ma35d1-evb > > > > > - const: nuvoton,ma35d1 > > > > > > > > > > - description: MA35D1 IoT board > > > > > items: > > > > > - const: nuvoton,ma35d1-iot > > > > Instead just enum with all board compatibles. > > > How about to modify it as the follows: > > > > > > compatible: > > > oneOf: > > > > > > - description: MA35D1 evaluation board > > > items: > > > - enum: > > > - nuvoton,ma35d1-evb > > > - const: nuvoton,ma35d1 > > > > > > - description: MA35D1 IoT board > > > items: > > > - enum: > > > - nuvoton,ma35d1-iot > > > - const: nuvoton,ma35d1 > > > > > > - description: MA35D1 SOM board > > > items: > > > - enum: > > > - nuvoton,ma35d1-som512 > > > - nuvoton,ma35d1-som1g > > > - const: nuvoton,ma35d1 > > > > > It's still almost the same. All boards together. You can add a comment > > next to the compatible if you want some user-friendly name. > > > > > > Best regards, > > Krzysztof > > OK, I got it. Like this, > > compatible: > oneOf: > > - description: MA35D1 based boards > items: > - enum: > - nuvoton,ma35d1-evb > - nuvoton,ma35d1-iot > - nuvoton,ma35d1-som512 > - nuvoton,ma35d1-som1g The memory node distinguishes how much memory. Is the board different for the SoM? If not, combine these to 1. > - const: nuvoton,ma35d1 > > Sincerely, > Jacky Huang > > >
On 2022/4/26 上午 08:19, Rob Herring wrote: > On Thu, Apr 21, 2022 at 04:13:20PM +0800, Jacky Huang wrote: >> >> On 2022/4/21 下午 04:05, Krzysztof Kozlowski wrote: >>> On 21/04/2022 10:04, Jacky Huang wrote: >>>> On 2022/4/21 下午 02:56, Krzysztof Kozlowski wrote: >>>>> On 21/04/2022 08:39, Jacky Huang wrote: >>>>>> On 2022/4/18 下午 08:11, Krzysztof Kozlowski wrote: >>>>>>> On 18/04/2022 10:27, Jacky Huang wrote: >>>>>>>> +properties: >>>>>>>> + $nodename: >>>>>>>> + const: '/' >>>>>>>> + compatible: >>>>>>>> + items: >>>>>>>> + - enum: >>>>>>>> + - nuvoton,ma35d1 >>>>>>>> + - nuvoton,ma35d1-evb >>>>>>>> + - nuvoton,ma35d1-iot >>>>>>>> + - nuvoton,ma35d1-som512 >>>>>>>> + - nuvoton,ma35d1-som1g >>>>>>> This does not match your DTS and does not look reasonable (SoC >>>>>>> compatible should not be part of this enum). Check some other board >>>>>>> bindings for examples. >>>>>>> >>>>>>> >>>>>>> Best regards, >>>>>>> Krzysztof >>>>>> I would like to modify it as follows: >>>>>> >>>>>> description: | >>>>>> Boards with an ARMv8 based Nuvoton SoC shall have the following >>>>>> properties. >>>>>> >>>>>> properties: >>>>>> $nodename: >>>>>> const: '/' >>>>>> compatible: >>>>>> oneOf: >>>>>> >>>>>> - description: MA35D1 evaluation board >>>>>> items: >>>>>> - const: nuvoton,ma35d1-evb >>>>>> - const: nuvoton,ma35d1 >>>>>> >>>>>> - description: MA35D1 IoT board >>>>>> items: >>>>>> - const: nuvoton,ma35d1-iot >>>>> Instead just enum with all board compatibles. >>>> How about to modify it as the follows: >>>> >>>> compatible: >>>> oneOf: >>>> >>>> - description: MA35D1 evaluation board >>>> items: >>>> - enum: >>>> - nuvoton,ma35d1-evb >>>> - const: nuvoton,ma35d1 >>>> >>>> - description: MA35D1 IoT board >>>> items: >>>> - enum: >>>> - nuvoton,ma35d1-iot >>>> - const: nuvoton,ma35d1 >>>> >>>> - description: MA35D1 SOM board >>>> items: >>>> - enum: >>>> - nuvoton,ma35d1-som512 >>>> - nuvoton,ma35d1-som1g >>>> - const: nuvoton,ma35d1 >>>> >>> It's still almost the same. All boards together. You can add a comment >>> next to the compatible if you want some user-friendly name. >>> >>> >>> Best regards, >>> Krzysztof >> OK, I got it. Like this, >> >> compatible: >> oneOf: >> >> - description: MA35D1 based boards >> items: >> - enum: >> - nuvoton,ma35d1-evb >> - nuvoton,ma35d1-iot >> - nuvoton,ma35d1-som512 >> - nuvoton,ma35d1-som1g > The memory node distinguishes how much memory. Is the board different > for the SoM? If not, combine these to 1. Yes, I can make two dts files (som512 and som1g) with binding to the same som board. I will modify it as a single nuvoton,ma35d1-som board. Thank you. >> - const: nuvoton,ma35d1 >> >> Sincerely, >> Jacky Huang >> >> >> Sincerely, Jacky Huang
diff --git a/Documentation/devicetree/bindings/arm/nuvoton.yaml b/Documentation/devicetree/bindings/arm/nuvoton.yaml new file mode 100644 index 000000000000..2b8444c2f7ed --- /dev/null +++ b/Documentation/devicetree/bindings/arm/nuvoton.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/nuvoton.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton Platforms Device Tree Bindings + +maintainers: + - Jacky Huang <ychuang3@nuvoton.com> + +description: |+ + Bindings for Nuvoton ARMv8 based platform boards. + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - nuvoton,ma35d1 + - nuvoton,ma35d1-evb + - nuvoton,ma35d1-iot + - nuvoton,ma35d1-som512 + - nuvoton,ma35d1-som1g + +additionalProperties: true
Add binding for ARMv8 based Nuvotn SoCs and platform boards. Add initial bindings for MA35D1 series development boards. Signed-off-by: Jacky Huang <ychuang3@nuvoton.com> --- .../devicetree/bindings/arm/nuvoton.yaml | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/nuvoton.yaml