[v3,4/4] ARM: dts: stm32: add support for Protonic PRTT1x boards

Message ID	20220425132844.866743-5-o.rempel@pengutronix.de (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org> From: Oleksij Rempel <o.rempel@pengutronix.de> To: Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@foss.st.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzk+dt@kernel.org>, =?utf-8?b?SsOpcsO0bWUgUG91aWxsZXI=?= <jerome.pouiller@silabs.com> Cc: Oleksij Rempel <o.rempel@pengutronix.de>, kernel@pengutronix.de, linux-kernel@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 4/4] ARM: dts: stm32: add support for Protonic PRTT1x boards Date: Mon, 25 Apr 2022 15:28:44 +0200 Message-Id: <20220425132844.866743-5-o.rempel@pengutronix.de> In-Reply-To: <20220425132844.866743-1-o.rempel@pengutronix.de> References: <20220425132844.866743-1-o.rempel@pengutronix.de> MIME-Version: 1.0 Precedence: list Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
Series	mainline Protonic PRTT1x boards \| expand [v3,0/4] mainline Protonic PRTT1x boards [v3,1/4] dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards [v3,2/4] dt-bindings: net: silabs, wfx: add prt, prtt1c-wfm200 antenna variant [v3,3/4] ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group [v3,4/4] ARM: dts: stm32: add support for Protonic PRTT1x boards

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7c16f8a2b738..2585ba8e1293 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1156,6 +1156,9 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32h743i-disco.dtb \ stm32h750i-art-pi.dtb \ stm32mp135f-dk.dtb \ + stm32mp151a-prtt1a.dtb \ + stm32mp151a-prtt1c.dtb \ + stm32mp151a-prtt1s.dtb \ stm32mp153c-dhcom-drc02.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dhcor-avenger96.dtb \ diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1a.dts b/arch/arm/boot/dts/stm32mp151a-prtt1a.dts new file mode 100644 index 000000000000..75874eafde11 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp151a-prtt1a.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151a-prtt1l.dtsi" + +/ { + model = "Protonic PRTT1A"; + compatible = "prt,prtt1a", "st,stm32mp151"; +}; + +&ethernet0 { + phy-handle = <&phy0>; +}; + +&mdio0 { + /* TI DP83TD510E */ + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id2000.0181"; + reg = <0>; + interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; +}; + +&pwm5_pins_a { + pins { + pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */ + }; +}; + +&pwm5_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */ + }; +}; + +&timers5 { + status = "okay"; + + pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1c.dts b/arch/arm/boot/dts/stm32mp151a-prtt1c.dts new file mode 100644 index 000000000000..0d542c8ff2c7 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp151a-prtt1c.dts @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151a-prtt1l.dtsi" + +/ { + model = "Protonic PRTT1C"; + compatible = "prt,prtt1c", "st,stm32mp151"; + + clock_ksz9031: clock-ksz9031 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + clock_sja1105: clock-sja1105 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpioc 1 GPIO_ACTIVE_HIGH + &gpioa 2 GPIO_ACTIVE_HIGH>; + + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpiod 8 GPIO_ACTIVE_LOW>; + }; +}; + +&ethernet0 { + fixed-link { + speed = <100>; + full-duplex; + }; +}; + +&gpioa { + gpio-line-names = + "", "", "", "PHY0_nRESET", "PHY0_nINT", "", "", "", + "", "", "", "", "", "", "", "SPI1_nSS"; +}; + +&gpiod { + gpio-line-names = + "", "", "", "", "", "", "", "", + "WFM_RESET", "", "", "", "", "", "", ""; +}; + +&gpioe { + gpio-line-names = + "SDMMC2_nRESET", "", "", "", "", "", "SPI1_nRESET", "", + "", "", "", "", "WFM_nIRQ", "", "", ""; +}; + +&gpiog { + gpio-line-names = + "", "", "", "", "", "", "", "PHY3_nINT", + "PHY1_nINT", "PHY3_nRESET", "PHY2_nINT", "PHY2_nRESET", + "PHY1_nRESET", "SPE1_PWR", "SPE0_PWR", ""; +}; + +&mdio0 { + /* All this DP83TD510E PHYs can't be probed before switch@0 is + * probed so we need to use compatible with PHYid + */ + /* TI DP83TD510E */ + t1l0_phy: ethernet-phy@6 { + compatible = "ethernet-phy-id2000.0181"; + reg = <6>; + interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TD510E */ + t1l1_phy: ethernet-phy@7 { + compatible = "ethernet-phy-id2000.0181"; + reg = <7>; + interrupts-extended = <&gpiog 8 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 12 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TD510E */ + t1l2_phy: ethernet-phy@10 { + compatible = "ethernet-phy-id2000.0181"; + reg = <10>; + interrupts-extended = <&gpiog 10 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 11 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* Micrel KSZ9031 */ + rj45_phy: ethernet-phy@2 { + reg = <2>; + interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + + clocks = <&clock_ksz9031>; + }; +}; + +&qspi { + status = "disabled"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + non-removable; + no-sd; + no-sdio; + no-1-8-v; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&reg_3v3>; + vqmmc-supply = <&reg_3v3>; + status = "okay"; +}; + +&sdmmc2_b4_od_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ + }; +}; + +&sdmmc2_b4_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + }; +}; + +&sdmmc2_b4_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ + <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ + <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ + }; +}; + +&sdmmc2_d47_pins_a { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ + }; +}; + +&sdmmc2_d47_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */ + }; +}; + +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_b>; + pinctrl-1 = <&sdmmc3_b4_od_pins_b>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>; + non-removable; + no-1-8-v; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&reg_3v3>; + vqmmc-supply = <&reg_3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + mmc@1 { + compatible = "prt,prtt1c-wfm200", "silabs,wf200"; + reg = <1>; + }; +}; + +&sdmmc3_b4_od_pins_b { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ + }; +}; + +&sdmmc3_b4_pins_b { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ + <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */ + }; +}; + +&sdmmc3_b4_sleep_pins_b { + pins { + pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ + <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ + <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */ + }; +}; + +&spi1 { + pinctrl-0 = <&spi1_pins_b>; + pinctrl-names = "default"; + cs-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + switch@0 { + compatible = "nxp,sja1105q"; + reg = <0>; + spi-max-frequency = <4000000>; + spi-rx-delay-us = <1>; + spi-tx-delay-us = <1>; + spi-cpha; + + reset-gpios = <&gpioe 6 GPIO_ACTIVE_LOW>; + + clocks = <&clock_sja1105>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "t1l0"; + phy-mode = "rmii"; + phy-handle = <&t1l0_phy>; + }; + + port@1 { + reg = <1>; + label = "t1l1"; + phy-mode = "rmii"; + phy-handle = <&t1l1_phy>; + }; + + port@2 { + reg = <2>; + label = "t1l2"; + phy-mode = "rmii"; + phy-handle = <&t1l2_phy>; + }; + + port@3 { + reg = <3>; + label = "rj45"; + phy-handle = <&rj45_phy>; + phy-mode = "rgmii-id"; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <&ethernet0>; + phy-mode = "rmii"; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi new file mode 100644 index 000000000000..d865ab5d866b --- /dev/null +++ b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxad-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + ethernet0 = &ethernet0; + mdio-gpio0 = &mdio0; + serial0 = &uart4; + }; + + led-controller-0 { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + + /* DP83TD510E PHYs have max MDC rate of 1.75MHz. Since we can't reduce + * stmmac MDC clock without reducing system bus rate, we need to use + * gpio based MDIO bus. + */ + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpioc 1 GPIO_ACTIVE_HIGH + &gpioa 2 GPIO_ACTIVE_HIGH>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&dts { + status = "okay"; +}; + +&ethernet0 { + pinctrl-0 = <&ethernet0_rmii_pins_a>; + pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + status = "okay"; +}; + +&ethernet0_rmii_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */ + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ + }; +}; + +&ethernet0_rmii_sleep_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ + }; +}; + +&iwdg2 { + status = "okay"; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <104000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&qspi_bk1_pins_a { + pins1 { + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; +}; + +&rng1 { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&reg_3v3>; + vqmmc-supply = <&reg_3v3>; + status = "okay"; +}; + +&sdmmc1_b4_od_pins_a { + pins1 { + bias-pull-up; + }; + pins2 { + bias-pull-up; + }; +}; + +&sdmmc1_b4_pins_a { + pins1 { + bias-pull-up; + }; + pins2 { + bias-pull-up; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart4_idle_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-pull-up; + }; +}; + +&uart4_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-pull-up; + }; +}; + +&uart4_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */ + <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */ + }; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "host"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&reg_3v3>; +}; + +&usbphyc_port1 { + phy-supply = <&reg_3v3>; +}; diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1s.dts b/arch/arm/boot/dts/stm32mp151a-prtt1s.dts new file mode 100644 index 000000000000..ad25929e64e6 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp151a-prtt1s.dts @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151a-prtt1l.dtsi" + +/ { + model = "Protonic PRTT1S"; + compatible = "prt,prtt1s", "st,stm32mp151"; +}; + +&ethernet0 { + phy-handle = <&phy0>; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + clock-frequency = <100000>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + humidity-sensor@40 { + compatible = "ti,hdc1080"; + reg = <0x40>; + }; + + co2-sensor@62 { + compatible = "sensirion,scd41"; + reg = <0x62>; + }; +}; + +&i2c1_pins_a { + pins { + pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */ + }; +}; + +&i2c1_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */ + }; +}; + +&mdio0 { + /* TI DP83TD510E */ + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id2000.0181"; + reg = <0>; + interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; +};

[v3,4/4] ARM: dts: stm32: add support for Protonic PRTT1x boards

Commit Message

Comments

Patch