deleted file mode 100644
@@ -1,78 +0,0 @@
-Device Tree bindings for Arm Komeda display driver
-
-Required properties:
-- compatible: Should be "arm,mali-d71"
-- reg: Physical base address and length of the registers in the system
-- interrupts: the interrupt line number of the device in the system
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
- in 'clock-names'
-- clock-names: A list of clock names. It should contain:
- - "aclk": for the main processor clock
-- #address-cells: Must be 1
-- #size-cells: Must be 0
-- iommus: configure the stream id to IOMMU, Must be configured if want to
- enable iommu in display. for how to configure this node please reference
- devicetree/bindings/iommu/arm,smmu-v3.txt,
- devicetree/bindings/iommu/iommu.txt
-
-Required properties for sub-node: pipeline@nq
-Each device contains one or two pipeline sub-nodes (at least one), each
-pipeline node should provide properties:
-- reg: Zero-indexed identifier for the pipeline
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
- in 'clock-names'
-- clock-names: should contain:
- - "pxclk": pixel clock
-
-- port: each pipeline connect to an encoder input port. The connection is
- modeled using the OF graph bindings specified in
- Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
- - memory-region: phandle to a node describing memory (see
- Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
- to be used for the framebuffer; if not present, the framebuffer may
- be located anywhere in memory.
-
-Example:
-/ {
- ...
-
- dp0: display@c00000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "arm,mali-d71";
- reg = <0xc00000 0x20000>;
- interrupts = <0 168 4>;
- clocks = <&dpu_aclk>;
- clock-names = "aclk";
- iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
- <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
- <&smmu 8>, <&smmu 9>;
-
- dp0_pipe0: pipeline@0 {
- clocks = <&fpgaosc2>;
- clock-names = "pxclk";
- reg = <0>;
-
- port {
- dp0_pipe0_out: endpoint {
- remote-endpoint = <&db_dvi0_in>;
- };
- };
- };
-
- dp0_pipe1: pipeline@1 {
- clocks = <&fpgaosc2>;
- clock-names = "pxclk";
- reg = <1>;
-
- port {
- dp0_pipe1_out: endpoint {
- remote-endpoint = <&db_dvi1_in>;
- };
- };
- };
- };
- ...
-};
new file mode 100644
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,komeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Komeda display processor
+
+maintainers:
+ - Liviu Dudau <Liviu.Dudau@arm.com>
+ - Andre Przywara <andre.przywara@arm.com>
+
+description: |+
+ The Arm Mali D71 display processor supports up to two displays with up
+ to a 4K resolution each. Each pipeline can be composed of up to four
+ layers. It is typically connected to a digital display connector like HDMI.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: arm,mali-d32
+ - const: arm,mali-d71
+ - const: arm,mali-d71
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-names:
+ const: aclk
+
+ clocks:
+ maxItems: 1
+ description: The main DPU processor clock
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ memory-region:
+ maxItems: 1
+ description:
+ Phandle to a node describing memory to be used for the framebuffer.
+ If not present, the framebuffer may be located anywhere in memory.
+
+ iommus:
+ description:
+ The stream IDs for each of the used pipelines, each four IDs for the
+ four layers, plus one for the write-back stream.
+ minItems: 5
+ maxItems: 10
+
+patternProperties:
+ '^pipeline@[01]$':
+ type: object
+ description:
+ clocks
+
+ properties:
+ reg:
+ enum: [ 0, 1 ]
+
+ clock-names:
+ const: pxclk
+
+ clocks:
+ maxItems: 1
+ description: The input reference for the pixel clock.
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clock-names
+ - clocks
+ - pipeline@0
+
+examples:
+ - |
+ display@c00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "arm,mali-d71";
+ reg = <0xc00000 0x20000>;
+ interrupts = <168>;
+ clocks = <&dpu_aclk>;
+ clock-names = "aclk";
+ iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
+ <&smmu 8>,
+ <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
+ <&smmu 9>;
+
+ dp0_pipe0: pipeline@0 {
+ clocks = <&fpgaosc2>;
+ clock-names = "pxclk";
+ reg = <0>;
+
+ port {
+ dp0_pipe0_out: endpoint {
+ remote-endpoint = <&db_dvi0_in>;
+ };
+ };
+ };
+
+ dp0_pipe1: pipeline@1 {
+ clocks = <&fpgaosc2>;
+ clock-names = "pxclk";
+ reg = <1>;
+
+ port {
+ dp0_pipe1_out: endpoint {
+ remote-endpoint = <&db_dvi1_in>;
+ };
+ };
+ };
+ };
+...
The Arm Komeda (aka Mali-D71) is a display controller that scans out a framebuffer and hands a signal to a digital encoder to generate a DVI or HDMI signal. It supports up to two pipelines, each frame can be composed of up to four layers. Convert the existing DT binding to DT schema. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- .../bindings/display/arm,komeda.txt | 78 ----------- .../bindings/display/arm,komeda.yaml | 130 ++++++++++++++++++ 2 files changed, 130 insertions(+), 78 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/arm,komeda.txt create mode 100644 Documentation/devicetree/bindings/display/arm,komeda.yaml