| Message ID | 20220504170736.2669595-1-andre.przywara@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | pinctrl: sunxi: f1c100s: Fix signal name comment for PA2 SPI pin | expand |
Dne sreda, 04. maj 2022 ob 19:07:36 CEST je Andre Przywara napisal(a): > The manual describes function 0x6 of pin PA2 as "SPI1_CLK", so change > the comment to reflect that. > > Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Best regards, Jernej > --- > drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c b/drivers/pinctrl/ sunxi/pinctrl-suniv-f1c100s.c > index 2801ca7062732..8109efac341e2 100644 > --- a/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c > +++ b/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c > @@ -51,7 +51,7 @@ static const struct sunxi_desc_pin suniv_f1c100s_pins[] = { > SUNXI_FUNCTION(0x3, "pwm0"), /* PWM0 */ > SUNXI_FUNCTION(0x4, "i2s"), /* IN */ > SUNXI_FUNCTION(0x5, "uart1"), /* RX */ > - SUNXI_FUNCTION(0x6, "spi1")), /* MOSI */ > + SUNXI_FUNCTION(0x6, "spi1")), /* CLK */ > SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 3), > SUNXI_FUNCTION(0x0, "gpio_in"), > SUNXI_FUNCTION(0x1, "gpio_out"), > -- > 2.25.1 > >
On Wed, May 4, 2022 at 7:07 PM Andre Przywara <andre.przywara@arm.com> wrote: > The manual describes function 0x6 of pin PA2 as "SPI1_CLK", so change > the comment to reflect that. > > Signed-off-by: Andre Przywara <andre.przywara@arm.com> Patch applied, thanks Andre! Yours, Linus Walleij
diff --git a/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c b/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c index 2801ca7062732..8109efac341e2 100644 --- a/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c +++ b/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c @@ -51,7 +51,7 @@ static const struct sunxi_desc_pin suniv_f1c100s_pins[] = { SUNXI_FUNCTION(0x3, "pwm0"), /* PWM0 */ SUNXI_FUNCTION(0x4, "i2s"), /* IN */ SUNXI_FUNCTION(0x5, "uart1"), /* RX */ - SUNXI_FUNCTION(0x6, "spi1")), /* MOSI */ + SUNXI_FUNCTION(0x6, "spi1")), /* CLK */ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 3), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"),
The manual describes function 0x6 of pin PA2 as "SPI1_CLK", so change the comment to reflect that. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)