@@ -42,8 +42,6 @@ &piether {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- clocks = <&clk300mhz>, <&clk125mhz>;
- clock-names = "stmmaceth", "phy_ref_clk";
mdio0 {
#address-cells = <1>;
@@ -42,8 +42,6 @@ &piether {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- clocks = <&clk300mhz>, <&clk125mhz>;
- clock-names = "stmmaceth", "phy_ref_clk";
mdio0 {
#address-cells = <1>;
@@ -136,20 +136,6 @@ clk25mhz: clk25mhz {
clock-output-names = "clk25mhz";
};
- clk125mhz: clk125mhz {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- #clock-cells = <0>;
- clock-output-names = "clk125mhz";
- };
-
- clk300mhz: clk300mhz {
- compatible = "fixed-clock";
- clock-frequency = <300000000>;
- #clock-cells = <0>;
- clock-output-names = "clk300mhz";
- };
-
clk600mhz: clk600mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -485,6 +471,8 @@ piether: ethernet@28000000 {
snps,txpbl = <4>;
snps,rxpbl = <4>;
snps,tso;
+ clocks = <&pismu TMPV770X_CLK_PIETHER_BUS>, <&pismu TMPV770X_CLK_PIETHER_125M>;
+ clock-names = "stmmaceth", "phy_ref_clk";
status = "disabled";
};
Remove fixed clock and source common clock for ethernet device. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> --- arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts | 2 -- .../boot/dts/toshiba/tmpv7708-visrobo-vrb.dts | 2 -- arch/arm64/boot/dts/toshiba/tmpv7708.dtsi | 16 ++-------------- 3 files changed, 2 insertions(+), 18 deletions(-)