diff mbox series

[v6,2/7] dt-bindings: thermal: Add binding document for mt6873 thermal controller

Message ID 20220512122433.1399802-3-abailon@baylibre.com (mailing list archive)
State New, archived
Headers show
Series Add LVTS architecture thermal | expand

Commit Message

Alexandre Bailon May 12, 2022, 12:24 p.m. UTC 
From: Michael Kao <michael.kao@mediatek.com>

This patch adds binding document for mt6873 thermal controller.

Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
---
 .../thermal/mediatek-thermal-lvts.yaml        | 81 +++++++++++++++++++
 1 file changed, 81 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml

Comments

Krzysztof Kozlowski May 12, 2022, 2:25 p.m. UTC | #1 
On 12/05/2022 14:24, Alexandre Bailon wrote:
> From: Michael Kao <michael.kao@mediatek.com>
> 
> This patch adds binding document for mt6873 thermal controller.

Thank you for your patch. There is something to discuss/improve.

> 
> Signed-off-by: Michael Kao <michael.kao@mediatek.com>
> Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
> ---
>  .../thermal/mediatek-thermal-lvts.yaml        | 81 +++++++++++++++++++
>  1 file changed, 81 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
> 
> diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml b/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
> new file mode 100644
> index 000000000000..69ffe7b14c21
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml

filename: vendor,device
so something like mediatek,mt6873-lvts.yaml or
mediatek,mt6873-lvts-thermal.yaml

> @@ -0,0 +1,81 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/mediatek-thermal-lvts.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek SoC LVTS thermal controller (DTS) binding

s/(DTS) binding//
(unless DTS means something related to hardware)

> +
> +maintainers:
> +  - Yu-Chia Chang <ethan.chang@mediatek.com>
> +  - Ben Tseng <ben.tseng@mediatek.com>
> +
> +properties:
> +  compatible:
> +    const: mediatek,mt6873-lvts
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: lvts_clk

Skip "_clk" suffix, so just lvts.

> +
> +  "#thermal-sensor-cells":
> +    const: 0
> +
> +required:
> +  - "#thermal-sensor-cells"
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names

You should reference in allOf therma-sensor.yaml unless this is not a
thermal sensor?

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/thermal/thermal.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/mt8192-clk.h>
> +    dts: lvts@1100b000 {

Generic node name, so thermal-sensor

> +        compatible = "mediatek,mt6873-lvts";
> +        reg = <0x1100b000 0x1000>;
> +        clocks = <&infracfg CLK_INFRA_THERM>;
> +        clock-names = "lvts_clk";
> +        #thermal-sensor-cells = <0>;
> +        interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
> +    };
> +
> +    thermal-zones {
> +        cpu_thermal: cpu-thermal {
> +            polling-delay-passive = <0>;
> +            polling-delay = <0>;
> +
> +            thermal-sensors = <&dts>;
> +            trips {
> +                cpu_alert1: cpu-alert1 {
> +                    temperature = <85000>;
> +                    hysteresis = <0>;
> +                    type = "passive";
> +                };
> +
> +                cpu_crit: cpu-crit {
> +                    temperature = <120000>;
> +                    hysteresis = <0>;
> +                    type = "critical";
> +                };
> +            };
> +
> +            cooling-maps {
> +            };

Empty node? Is it used anyhow here?

> +        };
> +    };
> +...


Best regards,
Krzysztof
Rob Herring (Arm) May 17, 2022, 5:59 p.m. UTC | #2 
On Thu, May 12, 2022 at 04:25:51PM +0200, Krzysztof Kozlowski wrote:
> On 12/05/2022 14:24, Alexandre Bailon wrote:
> > From: Michael Kao <michael.kao@mediatek.com>
> > 
> > This patch adds binding document for mt6873 thermal controller.
> 
> Thank you for your patch. There is something to discuss/improve.
> 
> > 
> > Signed-off-by: Michael Kao <michael.kao@mediatek.com>
> > Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
> > ---
> >  .../thermal/mediatek-thermal-lvts.yaml        | 81 +++++++++++++++++++
> >  1 file changed, 81 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml b/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
> > new file mode 100644
> > index 000000000000..69ffe7b14c21
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
> 
> filename: vendor,device
> so something like mediatek,mt6873-lvts.yaml or
> mediatek,mt6873-lvts-thermal.yaml
> 
> > @@ -0,0 +1,81 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/thermal/mediatek-thermal-lvts.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Mediatek SoC LVTS thermal controller (DTS) binding
> 
> s/(DTS) binding//
> (unless DTS means something related to hardware)
> 
> > +
> > +maintainers:
> > +  - Yu-Chia Chang <ethan.chang@mediatek.com>
> > +  - Ben Tseng <ben.tseng@mediatek.com>
> > +
> > +properties:
> > +  compatible:
> > +    const: mediatek,mt6873-lvts
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    items:
> > +      - const: lvts_clk
> 
> Skip "_clk" suffix, so just lvts.

Or drop altogether. There's generally no good name when there's only one 
entry so folks just make up 'clk', 'phy', 'rst', etc. or $block for the 
name.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml b/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
new file mode 100644
index 000000000000..69ffe7b14c21
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
@@ -0,0 +1,81 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/mediatek-thermal-lvts.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek SoC LVTS thermal controller (DTS) binding
+
+maintainers:
+  - Yu-Chia Chang <ethan.chang@mediatek.com>
+  - Ben Tseng <ben.tseng@mediatek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt6873-lvts
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: lvts_clk
+
+  "#thermal-sensor-cells":
+    const: 0
+
+required:
+  - "#thermal-sensor-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/thermal/thermal.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8192-clk.h>
+    dts: lvts@1100b000 {
+        compatible = "mediatek,mt6873-lvts";
+        reg = <0x1100b000 0x1000>;
+        clocks = <&infracfg CLK_INFRA_THERM>;
+        clock-names = "lvts_clk";
+        #thermal-sensor-cells = <0>;
+        interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+    thermal-zones {
+        cpu_thermal: cpu-thermal {
+            polling-delay-passive = <0>;
+            polling-delay = <0>;
+
+            thermal-sensors = <&dts>;
+            trips {
+                cpu_alert1: cpu-alert1 {
+                    temperature = <85000>;
+                    hysteresis = <0>;
+                    type = "passive";
+                };
+
+                cpu_crit: cpu-crit {
+                    temperature = <120000>;
+                    hysteresis = <0>;
+                    type = "critical";
+                };
+            };
+
+            cooling-maps {
+            };
+        };
+    };
+...