diff mbox series

[RFC,v3,4/5] arm64: dts: rockchip: rk3568: Add PCIe v3 nodes

Message ID 20220514115946.8858-5-linux@fw-web.de (mailing list archive)
State New, archived
Headers show
Series RK3568 PCIe V3 support | expand

Commit Message

Frank Wunderlich May 14, 2022, 11:59 a.m. UTC
From: Frank Wunderlich <frank-w@public-files.de>

Add nodes to rk356x devicetree to support PCIe v3.

Co-developed-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v3:
- fix from Peter: change bus-range and msi-map, msi-map needs
  to start from 0x0

v2:
- change to compatible with soc-part
- change rockchip,bifurcation to vendor unspecific bifurcation
---
 arch/arm64/boot/dts/rockchip/rk3568.dtsi | 122 +++++++++++++++++++++++
 1 file changed, 122 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index 5eafddf62edc..6dbe73c9cddf 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -42,6 +42,128 @@  qos_sata0: qos@fe190200 {
 		reg = <0x0 0xfe190200 0x0 0x20>;
 	};
 
+	pcie30_phy_grf: syscon@fdcb8000 {
+		compatible = "rockchip,rk3568-pcie3-phy-grf", "syscon";
+		reg = <0x0 0xfdcb8000 0x0 0x10000>;
+	};
+
+	pcie30phy: phy@fe8c0000 {
+		compatible = "rockchip,rk3568-pcie3-phy";
+		reg = <0x0 0xfe8c0000 0x0 0x20000>;
+		#phy-cells = <0>;
+		clocks = <&pmucru CLK_PCIE30PHY_REF_M>, <&pmucru CLK_PCIE30PHY_REF_N>,
+			 <&cru PCLK_PCIE30PHY>;
+		clock-names = "refclk_m", "refclk_n", "pclk";
+		resets = <&cru SRST_PCIE30PHY>;
+		reset-names = "phy";
+		rockchip,phy-grf = <&pcie30_phy_grf>;
+		status = "disabled";
+	};
+
+	pcie3x1: pcie@fe270000 {
+		compatible = "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>,
+			 <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>,
+			 <&cru CLK_PCIE30X1_AUX_NDFT>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk", "aux";
+		device_type = "pci";
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x1_intc 0>,
+				<0 0 0 2 &pcie3x1_intc 1>,
+				<0 0 0 3 &pcie3x1_intc 2>,
+				<0 0 0 4 &pcie3x1_intc 3>;
+		linux,pci-domain = <1>;
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		max-link-speed = <3>;
+		msi-map = <0x0 &gic 0x1000 0x1000>;
+		num-lanes = <1>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3568_PD_PIPE>;
+		reg = <0x3 0xc0400000 0x0 0x00400000>,
+		      <0x0 0xfe270000 0x0 0x00010000>,
+		      <0x3 0x40000000 0x0 0x01000000>;
+		ranges = <0x01000000 0x0 0x01000000 0x3 0x41000000 0x0 0x00100000>,
+			 <0x02000000 0x0 0x02000000 0x3 0x41100000 0x0 0x3ef00000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE30X1_POWERUP>;
+		reset-names = "pipe";
+		/* bifurcation; lane1 when using 1+1 */
+		status = "disabled";
+
+		pcie3x1_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	pcie3x2: pcie@fe280000 {
+		compatible = "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>,
+			 <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>,
+			 <&cru CLK_PCIE30X2_AUX_NDFT>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk", "aux";
+		device_type = "pci";
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
+				<0 0 0 2 &pcie3x2_intc 1>,
+				<0 0 0 3 &pcie3x2_intc 2>,
+				<0 0 0 4 &pcie3x2_intc 3>;
+		linux,pci-domain = <2>;
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		max-link-speed = <3>;
+		msi-map = <0x0 &gic 0x2000 0x1000>;
+		num-lanes = <2>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3568_PD_PIPE>;
+		reg = <0x3 0xc0800000 0x0 0x00400000>,
+		      <0x0 0xfe280000 0x0 0x00010000>,
+		      <0x3 0x80000000 0x0 0x01000000>;
+		ranges = <0x01000000 0x0 0x01000000 0x3 0x81000000 0x0 0x00100000>,
+			 <0x02000000 0x0 0x02000000 0x3 0x81100000 0x0 0x3ef00000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE30X2_POWERUP>;
+		reset-names = "pipe";
+		/* bifurcation; lane0 when using 1+1 */
+		status = "disabled";
+
+		pcie3x2_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
 	gmac0: ethernet@fe2a0000 {
 		compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a";
 		reg = <0x0 0xfe2a0000 0x0 0x10000>;