diff mbox series

[v8,7/8] ARM: dts: Introduce HPE GXP Device tree

Message ID 20220516163347.44890-7-nick.hawkins@hpe.com (mailing list archive)
State New, archived
Headers show
Series Introduce HPE GXP Architecture | expand

Commit Message

Hawkins, Nick May 16, 2022, 4:33 p.m. UTC 
From: Nick Hawkins <nick.hawkins@hpe.com>

The HPE SoC is new to linux. A basic device tree layout with minimum
required for linux to boot including a timer and watchdog support has
been created.

The dts file is empty at this point but will be updated in subsequent
updates as board specific features are enabled.

Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---
v8:
* No change
v7:
* Changed cache register area length from 0xFFC to 0x1000
* Added space between "," in compatible list for the
  hpe-bmc-dl360gen10.dts
* Added aliases, chosen, and memory to hpe-bmc-dl360gen10.dts
* Removed memory from hpe-gxp.dtsi
v6:
* Added cache-controller to CPU
* Removed hpe,gxp-wdt and removed simple-mfd from hpe,gxp-timer
* Added space after ',' in compatible lists in the dtsi containing more
  than one item
* Switched clock name iopclk to iop based on feedback from
  hpe,gxp-timer.yaml
* Added clock labels clock-0 and clock-1
* Added dma-ranges to ahb
* Changed subject to better match ones in the log
* Changed description to fit 75 characters per line
v5:
* Fixed commit message to show previous changes
* Fixed typo ehci -> echi
v4:
* Removed hpe,gxp-cpu-init as it was no longer necessary
* Removed bootargs as requested
* Removed empty ahb node
* Moved reg after compatible, everywhere
* Removed osc and memclk
* Removed syscon@c00000f8 as it was not necessary for boot
* Fixed Alphabetical issue in dts/Makefile
* Added specific board binding for dl360gen10
* Removed empty node
* Added Accurate Clock Architecture
* Fixed generic-echi and generic-ochi issues
* Removed i2cg
v3:
* Fixed issues with warnings
* Used proper patchset format
v2:
* Reduced size of dtsi to essential components
* Followed the proper format for having a dtsi and
  dts
---
 arch/arm/boot/dts/Makefile               |   2 +
 arch/arm/boot/dts/hpe-bmc-dl360gen10.dts |  26 +++++
 arch/arm/boot/dts/hpe-gxp.dtsi           | 127 +++++++++++++++++++++++
 3 files changed, 155 insertions(+)
 create mode 100644 arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
 create mode 100644 arch/arm/boot/dts/hpe-gxp.dtsi
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7c16f8a2b738..293717719c70 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -255,6 +255,8 @@  dtb-$(CONFIG_ARCH_HISI) += \
 	hi3519-demb.dtb
 dtb-$(CONFIG_ARCH_HIX5HD2) += \
 	hisi-x5hd2-dkb.dtb
+dtb-$(CONFIG_ARCH_HPE_GXP) += \
+	hpe-bmc-dl360gen10.dtb
 dtb-$(CONFIG_ARCH_INTEGRATOR) += \
 	integratorap.dtb \
 	integratorap-im-pd1.dtb \
diff --git a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
new file mode 100644
index 000000000000..3a7382ce40ef
--- /dev/null
+++ b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
@@ -0,0 +1,26 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE DL360Gen10
+ */
+
+/include/ "hpe-gxp.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "hpe,gxp-dl360gen10", "hpe,gxp";
+	model = "Hewlett Packard Enterprise ProLiant dl360 Gen10";
+
+	aliases {
+		serial0 = &uartc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe-gxp.dtsi
new file mode 100644
index 000000000000..cf735b3c4f35
--- /dev/null
+++ b/arch/arm/boot/dts/hpe-gxp.dtsi
@@ -0,0 +1,127 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE GXP
+ */
+
+/dts-v1/;
+/ {
+	model = "Hewlett Packard Enterprise GXP BMC";
+	compatible = "hpe,gxp";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+		};
+	};
+
+	clocks {
+		pll: clock-0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1600000000>;
+		};
+
+		iopclk: clock-1 {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&pll>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		dma-ranges;
+
+		L2: cache-controller@b0040000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xb0040000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		ahb@c0000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc0000000 0x30000000>;
+			dma-ranges;
+
+			vic0: interrupt-controller@eff0000 {
+				compatible = "arm,pl192-vic";
+				reg = <0xeff0000 0x1000>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			vic1: interrupt-controller@80f00000 {
+				compatible = "arm,pl192-vic";
+				reg = <0x80f00000 0x1000>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			uarta: serial@e0 {
+				compatible = "ns16550a";
+				reg = <0xe0 0x8>;
+				interrupts = <17>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			uartb: serial@e8 {
+				compatible = "ns16550a";
+				reg = <0xe8 0x8>;
+				interrupts = <18>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			uartc: serial@f0 {
+				compatible = "ns16550a";
+				reg = <0xf0 0x8>;
+				interrupts = <19>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			usb0: usb@efe0000 {
+				compatible = "hpe,gxp-ehci", "generic-ehci";
+				reg = <0xefe0000 0x100>;
+				interrupts = <7>;
+				interrupt-parent = <&vic0>;
+			};
+
+			st: timer@80 {
+				compatible = "hpe,gxp-timer";
+				reg = <0x80 0x16>;
+				interrupts = <0>;
+				interrupt-parent = <&vic0>;
+				clocks = <&iopclk>;
+				clock-names = "iop";
+			};
+
+			usb1: usb@efe0100 {
+				compatible = "hpe,gxp-ohci", "generic-ohci";
+				reg = <0xefe0100 0x110>;
+				interrupts = <6>;
+				interrupt-parent = <&vic0>;
+			};
+		};
+	};
+};