@@ -786,6 +786,15 @@ config REGULATOR_MT6331
This driver supports the control of different power rails of device
through regulator interface
+config REGULATOR_MT6332
+ tristate "MediaTek MT6332 PMIC"
+ depends on MFD_MT6397
+ help
+ Say y here to select this option to enable the power regulator of
+ MediaTek MT6332 PMIC.
+ This driver supports the control of different power rails of device
+ through regulator interface
+
config REGULATOR_MT6358
tristate "MediaTek MT6358 PMIC"
depends on MFD_MT6397
@@ -95,6 +95,7 @@ obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o
obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
obj-$(CONFIG_REGULATOR_MT6331) += mt6331-regulator.o
+obj-$(CONFIG_REGULATOR_MT6332) += mt6332-regulator.o
obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o
obj-$(CONFIG_REGULATOR_MT6359) += mt6359-regulator.o
obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o
new file mode 100644
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 Collabora Ltd.
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ *
+ * Based on mt6323-regulator.c,
+ * Copyright (c) 2016 MediaTek Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6332/registers.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6332-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MT6332_LDO_MODE_NORMAL 0
+#define MT6332_LDO_MODE_LP 1
+
+/*
+ * MT6332 regulators information
+ *
+ * @desc: standard fields of regulator description.
+ * @qi: Mask for query enable signal status of regulators
+ * @vselon_reg: Register sections for hardware control mode of bucks
+ * @vselctrl_reg: Register for controlling the buck control mode.
+ * @vselctrl_mask: Mask for query buck's voltage control mode.
+ * @status_reg: Register for regulator enable status where qi unavailable
+ * @status_mask: Mask for querying regulator enable status
+ */
+struct mt6332_regulator_info {
+ struct regulator_desc desc;
+ u32 qi;
+ u32 vselon_reg;
+ u32 vselctrl_reg;
+ u32 vselctrl_mask;
+ u32 modeset_reg;
+ u32 modeset_mask;
+ u32 status_reg;
+ u32 status_mask;
+};
+
+#define MT6332_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \
+ vosel, vosel_mask, voselon, vosel_ctrl) \
+[MT6332_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6332_buck_volt_range_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6332_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = (max - min)/step + 1, \
+ .linear_ranges = volt_ranges, \
+ .n_linear_ranges = ARRAY_SIZE(volt_ranges), \
+ .vsel_reg = vosel, \
+ .vsel_mask = vosel_mask, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(0), \
+ }, \
+ .qi = BIT(13), \
+ .vselon_reg = voselon, \
+ .vselctrl_reg = vosel_ctrl, \
+ .vselctrl_mask = BIT(1), \
+ .status_mask = 0, \
+}
+
+#define MT6332_LDO_LINEAR(match, vreg, min, max, step, volt_ranges, \
+ enreg, vosel, vosel_mask, voselon, \
+ vosel_ctrl, _modeset_reg, _modeset_mask) \
+[MT6332_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6332_ldo_volt_range_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6332_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = (max - min)/step + 1, \
+ .linear_ranges = volt_ranges, \
+ .n_linear_ranges = ARRAY_SIZE(volt_ranges), \
+ .vsel_reg = vosel, \
+ .vsel_mask = vosel_mask, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(0), \
+ }, \
+ .qi = BIT(15), \
+ .vselon_reg = voselon, \
+ .vselctrl_reg = vosel_ctrl, \
+ .vselctrl_mask = BIT(1), \
+ .modeset_reg = _modeset_reg, \
+ .modeset_mask = _modeset_mask, \
+ .status_mask = 0, \
+}
+
+#define MT6332_LDO_AO(match, vreg, ldo_volt_table, vosel, vosel_mask) \
+[MT6332_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6332_volt_table_ao_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6332_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ARRAY_SIZE(ldo_volt_table), \
+ .volt_table = ldo_volt_table, \
+ .vsel_reg = vosel, \
+ .vsel_mask = vosel_mask, \
+ }, \
+}
+
+#define MT6332_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \
+ vosel_mask, _modeset_reg, _modeset_mask) \
+[MT6332_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6332_volt_table_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6332_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ARRAY_SIZE(ldo_volt_table), \
+ .volt_table = ldo_volt_table, \
+ .vsel_reg = vosel, \
+ .vsel_mask = vosel_mask, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(enbit), \
+ }, \
+ .qi = BIT(15), \
+ .modeset_reg = _modeset_reg, \
+ .modeset_mask = _modeset_mask, \
+ .status_mask = 0, \
+}
+
+#define MT6332_REG_FIXED(match, vreg, enreg, enbit, qibit, volt, stbit) \
+[MT6332_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6332_volt_fixed_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6332_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = 1, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(enbit), \
+ .min_uV = volt, \
+ }, \
+ .qi = BIT(qibit), \
+ .status_reg = MT6332_EN_STATUS0, \
+ .status_mask = BIT(stbit), \
+}
+
+static const struct linear_range boost_volt_range[] = {
+ REGULATOR_LINEAR_RANGE(3500000, 0, 0x7f, 31250),
+};
+
+static const struct linear_range buck_volt_range[] = {
+ REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250),
+};
+
+static const struct linear_range buck_pa_volt_range[] = {
+ REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000),
+};
+
+static const struct linear_range buck_rf_volt_range[] = {
+ REGULATOR_LINEAR_RANGE(1050000, 0, 0x7f, 9375),
+};
+
+static const unsigned int ldo_volt_table1[] = {
+ 2800000, 3000000, 0, 3200000
+};
+
+static const unsigned int ldo_volt_table2[] = {
+ 1200000, 1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1800000,
+};
+
+static int mt6332_get_status(struct regulator_dev *rdev)
+{
+ struct mt6332_regulator_info *info = rdev_get_drvdata(rdev);
+ u32 reg, en_mask, regval;
+ int ret;
+
+ if (info->qi > 0) {
+ reg = info->desc.enable_reg;
+ en_mask = info->qi;
+ } else {
+ reg = info->status_reg;
+ en_mask = info->status_mask;
+ }
+
+ ret = regmap_read(rdev->regmap, reg, ®val);
+ if (ret != 0) {
+ dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+ return ret;
+ }
+
+ return (regval & en_mask) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
+}
+
+static int mt6332_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ struct mt6332_regulator_info *info = rdev_get_drvdata(rdev);
+ int val;
+
+ switch (mode) {
+ case REGULATOR_MODE_STANDBY:
+ val = MT6332_LDO_MODE_LP;
+ break;
+ case REGULATOR_MODE_NORMAL:
+ val = MT6332_LDO_MODE_NORMAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val <<= ffs(info->modeset_mask) - 1;
+
+ return regmap_update_bits(rdev->regmap, info->modeset_reg,
+ info->modeset_mask, val);
+}
+
+static unsigned int mt6332_ldo_get_mode(struct regulator_dev *rdev)
+{
+ struct mt6332_regulator_info *info = rdev_get_drvdata(rdev);
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(rdev->regmap, info->modeset_reg, &val);
+ if (ret < 0)
+ return ret;
+
+ val &= info->modeset_mask;
+ val >>= ffs(info->modeset_mask) - 1;
+
+ return (val & BIT(0)) ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL;
+}
+
+static const struct regulator_ops mt6332_buck_volt_range_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_status = mt6332_get_status,
+};
+
+static const struct regulator_ops mt6332_ldo_volt_range_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_status = mt6332_get_status,
+ .set_mode = mt6332_ldo_set_mode,
+ .get_mode = mt6332_ldo_get_mode,
+};
+
+static const struct regulator_ops mt6332_volt_table_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_iterate,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_status = mt6332_get_status,
+ .set_mode = mt6332_ldo_set_mode,
+ .get_mode = mt6332_ldo_get_mode,
+};
+
+static const struct regulator_ops mt6332_volt_table_ao_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_iterate,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static const struct regulator_ops mt6332_volt_fixed_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_status = mt6332_get_status,
+};
+
+/* The array is indexed by id(MT6332_ID_XXX) */
+static struct mt6332_regulator_info mt6332_regulators[] = {
+ MT6332_BUCK("buck-vdram", VDRAM, 700000, 1493750, 6250, buck_volt_range,
+ MT6332_EN_STATUS0, MT6332_VDRAM_CON11, GENMASK(6, 0),
+ MT6332_VDRAM_CON12, MT6332_VDRAM_CON7),
+ MT6332_BUCK("buck-vdvfs2", VDVFS2, 700000, 1312500, 6250, buck_volt_range,
+ MT6332_VDVFS2_CON9, MT6332_VDVFS2_CON11, GENMASK(6, 0),
+ MT6332_VDVFS2_CON12, MT6332_VDVFS2_CON7),
+ MT6332_BUCK("buck-vpa", VPA, 500000, 3400000, 50000, buck_pa_volt_range,
+ MT6332_VPA_CON9, MT6332_VPA_CON11, GENMASK(5, 0),
+ MT6332_VPA_CON12, MT6332_VPA_CON7),
+ MT6332_BUCK("buck-vrf18a", VRF1, 1050000, 2240625, 9375, buck_rf_volt_range,
+ MT6332_VRF1_CON9, MT6332_VRF1_CON11, GENMASK(6, 0),
+ MT6332_VRF1_CON12, MT6332_VRF1_CON7),
+ MT6332_BUCK("buck-vrf18b", VRF2, 1050000, 2240625, 9375, buck_rf_volt_range,
+ MT6332_VRF2_CON9, MT6332_VRF2_CON11, GENMASK(6, 0),
+ MT6332_VRF2_CON12, MT6332_VRF2_CON7),
+ MT6332_BUCK("buck-vsbst", VSBST, 3500000, 7468750, 31250, boost_volt_range,
+ MT6332_VSBST_CON8, MT6332_VSBST_CON12, GENMASK(6, 0),
+ MT6332_VSBST_CON13, MT6332_VSBST_CON8),
+ MT6332_LDO("ldo-vauxb32", VAUXB32, ldo_volt_table1, MT6332_LDO_CON1, 10,
+ MT6332_LDO_CON9, GENMASK(6, 5), MT6332_LDO_CON1, GENMASK(1, 0)),
+ MT6332_REG_FIXED("ldo-vbif28", VBIF28, MT6332_LDO_CON2, 10, 0, 2800000, 1),
+ MT6332_REG_FIXED("ldo-vusb33", VUSB33, MT6332_LDO_CON3, 10, 0, 3300000, 2),
+ MT6332_LDO_LINEAR("ldo-vsram", VSRAM_DVFS2, 700000, 1493750, 6250, buck_volt_range,
+ MT6332_EN_STATUS0, MT6332_LDO_CON8, GENMASK(15, 9),
+ MT6332_VDVFS2_CON23, MT6332_VDVFS2_CON22,
+ MT6332_LDO_CON5, GENMASK(1, 0)),
+ MT6332_LDO_AO("ldo-vdig18", VDIG18, ldo_volt_table2, MT6332_LDO_CON12, GENMASK(11, 9)),
+};
+
+static int mt6332_set_buck_vosel_reg(struct platform_device *pdev)
+{
+ struct mt6397_chip *mt6332 = dev_get_drvdata(pdev->dev.parent);
+ int i;
+ u32 regval;
+
+ for (i = 0; i < MT6332_ID_VREG_MAX; i++) {
+ if (mt6332_regulators[i].vselctrl_reg) {
+ if (regmap_read(mt6332->regmap,
+ mt6332_regulators[i].vselctrl_reg,
+ ®val) < 0) {
+ dev_err(&pdev->dev,
+ "Failed to read buck ctrl\n");
+ return -EIO;
+ }
+
+ if (regval & mt6332_regulators[i].vselctrl_mask) {
+ mt6332_regulators[i].desc.vsel_reg =
+ mt6332_regulators[i].vselon_reg;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int mt6332_regulator_probe(struct platform_device *pdev)
+{
+ struct mt6397_chip *mt6332 = dev_get_drvdata(pdev->dev.parent);
+ struct regulator_config config = {};
+ struct regulator_dev *rdev;
+ int i;
+ u32 reg_value;
+
+ /* Query buck controller to select activated voltage register part */
+ if (mt6332_set_buck_vosel_reg(pdev))
+ return -EIO;
+
+ /* Read PMIC chip revision to update constraints and voltage table */
+ if (regmap_read(mt6332->regmap, MT6332_HWCID, ®_value) < 0) {
+ dev_err(&pdev->dev, "Failed to read Chip ID\n");
+ return -EIO;
+ }
+ reg_value &= GENMASK(7, 0);
+
+ dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value);
+
+ /*
+ * ChipID 0x10 is "MT6332 E1", has a different voltage table and
+ * it's currently not supported in this driver. Upon detection of
+ * this ID, refuse to register the regulators, as we will wrongly
+ * interpret the VSEL for this revision, potentially overvolting
+ * some device.
+ */
+ if (reg_value == 0x10) {
+ dev_err(&pdev->dev, "Chip version not supported. Bailing out.\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < MT6332_ID_VREG_MAX; i++) {
+ config.dev = &pdev->dev;
+ config.driver_data = &mt6332_regulators[i];
+ config.regmap = mt6332->regmap;
+ rdev = devm_regulator_register(&pdev->dev,
+ &mt6332_regulators[i].desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "failed to register %s\n",
+ mt6332_regulators[i].desc.name);
+ return PTR_ERR(rdev);
+ }
+ }
+ return 0;
+}
+
+static const struct platform_device_id mt6332_platform_ids[] = {
+ {"mt6332-regulator", 0},
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6332_platform_ids);
+
+static struct platform_driver mt6332_regulator_driver = {
+ .driver = {
+ .name = "mt6332-regulator",
+ },
+ .probe = mt6332_regulator_probe,
+ .id_table = mt6332_platform_ids,
+};
+
+module_platform_driver(mt6332_regulator_driver);
+
+MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6332 PMIC");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022 Collabora Ltd.
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+#ifndef __LINUX_REGULATOR_MT6332_H
+#define __LINUX_REGULATOR_MT6332_H
+
+enum {
+ /* BUCK */
+ MT6332_ID_VDRAM = 0,
+ MT6332_ID_VDVFS2,
+ MT6332_ID_VPA,
+ MT6332_ID_VRF1,
+ MT6332_ID_VRF2,
+ MT6332_ID_VSBST,
+ /* LDO */
+ MT6332_ID_VAUXB32,
+ MT6332_ID_VBIF28,
+ MT6332_ID_VDIG18,
+ MT6332_ID_VSRAM_DVFS2,
+ MT6332_ID_VUSB33,
+ MT6332_ID_VREG_MAX
+};
+
+#endif /* __LINUX_REGULATOR_MT6332_H */
Add a driver for the regulators found in the MT6332 PMICs, including six buck and four LDO regulators. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> --- drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/mt6332-regulator.c | 422 +++++++++++++++++++++ include/linux/regulator/mt6332-regulator.h | 27 ++ 4 files changed, 459 insertions(+) create mode 100644 drivers/regulator/mt6332-regulator.c create mode 100644 include/linux/regulator/mt6332-regulator.h