@@ -182,7 +182,8 @@ dtb-$(CONFIG_ARCH_BERLIN) += \
dtb-$(CONFIG_ARCH_BRCMSTB) += \
bcm7445-bcm97445svmb.dtb
dtb-$(CONFIG_ARCH_BCMBCA) += \
- bcm947622.dtb
+ bcm947622.dtb \
+ bcm96846.dtb
dtb-$(CONFIG_ARCH_CLPS711X) += \
ep7211-edb7211.dtb
dtb-$(CONFIG_ARCH_DAVINCI) += \
new file mode 100644
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "brcm,bcm6846", "brcm,bcmbca";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CA7_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&CA7_0>, <&CA7_1>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x81000000 0x8000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xff800000 0x800000>;
+
+ uart0: serial@640 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x640 0x1b>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ status = "disabled";
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6846.dtsi"
+
+/ {
+ model = "Broadcom BCM96846 Reference Board";
+ compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
Add dts for ARMv7 based broadband SoC BCM6846. bcm6846.dtsi is the SoC description dts header and bcm96846.dts is a simple dts file for Broadcom BCM96846 Reference board that only enable the UART port. Signed-off-by: William Zhang <william.zhang@broadcom.com> --- Changes in v3: - Fix timer PPI interrupt cpu mask for dual core cpu - Remove unnecessary cpu_on and cpu_off properties from psci node - Add the missing gic registers and interrupts property to gic node arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/bcm6846.dtsi | 103 +++++++++++++++++++++++++++++++++ arch/arm/boot/dts/bcm96846.dts | 30 ++++++++++ 3 files changed, 135 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/bcm6846.dtsi create mode 100644 arch/arm/boot/dts/bcm96846.dts