From patchwork Tue Jun 7 08:53:41 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 12871539 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id B67B4C43334 for ; Tue, 7 Jun 2022 08:57:37 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:Message-Id:Date:Subject:Cc :To:From:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:In-Reply-To:References: List-Owner; bh=28o4x6Z6p85RmqJc9M90ZQwEcOsLiOG+TTo0d10n600=; b=r+UJw9GopgLZQ4 iEyrwHgbMoSrt+5mH7C6aOL2oeUfzVxzOU/z9iOJae6ZQwT9vrsTLFzMofu9n0xsU5TbWlYJi6dz8 vLxeszGG3CldOQQOwCqXhd2T67LtepwoMr4GyS4tDk2ZJMCKZn6D5KgQUdaKYTfyCh6bFMtV2+5jx SkM9ld0McPzWD2yEb0nIPO/XQFbEhNzFR9W5Ga/cAyJpwu44WEPiOC83i/GHMAjJeQdHrIAHN5vSI vH6BDHiWsEmYanO+WKoCSCdx9Tr8KKATkJAbMBIhQUx3sirhWNwSdTCIVN69I/IXp0ipfhty99+XV u03W8GUaNxry12D52znA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1nyV0Y-005yC3-G2; Tue, 07 Jun 2022 08:56:16 +0000 Received: from mail-ej1-x62a.google.com ([2a00:1450:4864:20::62a]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1nyUyD-005wd1-17 for linux-arm-kernel@lists.infradead.org; Tue, 07 Jun 2022 08:53:51 +0000 Received: by mail-ej1-x62a.google.com with SMTP id kq6so20745545ejb.11 for ; Tue, 07 Jun 2022 01:53:47 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=9z6WrFwb2fPXlQl3Uyym8/TioSfH3qqjKkRFpZGE28g=; b=qhsiWn7NWGHI1rEEL3xWQ3iES5hVECosmvK1IierJBoeDO0Dx/wYKX5UFNRVXZEb8z svuBwCCwRUpMel616GqqyT5+KzgcswKzIe1dXuwlZTtafjBV7K3DLfKx2CFuyRzKv2h7 KJKuHjHez4pafG48WzeJ2XmOY8FIolXTh+n27xqPeeCY7Q+vjH0Mv5xS8T4O/KmanaNo 7np3TLDZuBek270r5UHGV7CDjlY8jUn2QyTNJA9MR7HAqVwEYB81vjSgTqW1qikASxce yEKjNSBZeIQMorBWeKGjGK6hjojAuHI6xSxBpJLfTfaHLTW001kGUo3GfIrvLkoOyNgp 5CNA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=9z6WrFwb2fPXlQl3Uyym8/TioSfH3qqjKkRFpZGE28g=; b=KVfpGqMDWHgnl/bIRbetH9IRwUlPsfHbfbWg57xZpauqMGjQ9/HOC/g04KFGpZ2COU odS04HVrlBV0emE8TTXE+Rz9nSSK5SWe57Q0AhoQHTCDrmah3PlXDaMFly8hQdVnTzws FHJRWcaAt+63h4Pm12o3Q4Oe14Jlj3OUB6+ouRJjTXnyiA8YV5piC3Y+4JyaC8OG1SoD 1yNq+BhwUey96URrUPiYn0ts6HdGy2w7ryJFAT8YSynb1vf9wqYAO0FDFSEVhyEl8T/U ypwO8xKk/u+F2WASIprVAJej5GjuMsNggoc19Z+r5BzYB6IgojFCZ+RFLIj4qK8OKCI5 SU8g== X-Gm-Message-State: AOAM533yeKZ5SHMNWvEVbYZLSdQgR/qWDxSz3OMyUuUXsovOlRmovY4I zKY+zHfmrvlpXU9MfLxBafjNrA== X-Google-Smtp-Source: ABdhPJwIZgnqzzbhzjlmEhZvB2RsAnSMQYSXIpeaomKW9o+4SvNwnoMf+SXfJ+psJEfcfXByw7jtdg== X-Received: by 2002:a17:906:d195:b0:711:357a:d33d with SMTP id c21-20020a170906d19500b00711357ad33dmr13454683ejz.517.1654592025898; Tue, 07 Jun 2022 01:53:45 -0700 (PDT) Received: from localhost.localdomain (xdsl-188-155-176-92.adslplus.ch. [188.155.176.92]) by smtp.gmail.com with ESMTPSA id k16-20020a1709061c1000b00705cdfec71esm7176703ejg.7.2022.06.07.01.53.44 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 07 Jun 2022 01:53:45 -0700 (PDT) From: Krzysztof Kozlowski To: Pavel Machek , Rob Herring , Krzysztof Kozlowski , Alim Akhtar , Jacek Anaszewski , linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org Cc: Krzysztof Kozlowski Subject: [PATCH 1/3] dt-bindings: leds: skyworks,aat1290: convert to dtschema Date: Tue, 7 Jun 2022 10:53:41 +0200 Message-Id: <20220607085343.72414-1-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.34.1 MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220607_015349_135952_629A125A X-CRM114-Status: GOOD ( 21.23 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Convert the Skyworks Solutions, Inc. AAT1290 Current Regulator bindings to DT Schema. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring --- .../devicetree/bindings/leds/leds-aat1290.txt | 77 --------------- .../bindings/leds/skyworks,aat1290.yaml | 96 +++++++++++++++++++ 2 files changed, 96 insertions(+), 77 deletions(-) delete mode 100644 Documentation/devicetree/bindings/leds/leds-aat1290.txt create mode 100644 Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml diff --git a/Documentation/devicetree/bindings/leds/leds-aat1290.txt b/Documentation/devicetree/bindings/leds/leds-aat1290.txt deleted file mode 100644 index 62ed17ec075b..000000000000 --- a/Documentation/devicetree/bindings/leds/leds-aat1290.txt +++ /dev/null @@ -1,77 +0,0 @@ -* Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs - -The device is controlled through two pins: FL_EN and EN_SET. The pins when, -asserted high, enable flash strobe and movie mode (max 1/2 of flash current) -respectively. In order to add a capability of selecting the strobe signal source -(e.g. CPU or camera sensor) there is an additional switch required, independent -of the flash chip. The switch is controlled with pin control. - -Required properties: - -- compatible : Must be "skyworks,aat1290". -- flen-gpios : Must be device tree identifier of the flash device FL_EN pin. -- enset-gpios : Must be device tree identifier of the flash device EN_SET pin. - -Optional properties: -- pinctrl-names : Must contain entries: "default", "host", "isp". Entries - "default" and "host" must refer to the same pin configuration - node, which sets the host as a strobe signal provider. Entry - "isp" must refer to the pin configuration node, which sets the - ISP as a strobe signal provider. - -A discrete LED element connected to the device must be represented by a child -node - see Documentation/devicetree/bindings/leds/common.txt. - -Required properties of the LED child node: -- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt -- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt - Maximum flash LED supply current can be calculated using - following formula: I = 1A * 162kohm / Rset. -- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt - Maximum flash timeout can be calculated using following - formula: T = 8.82 * 10^9 * Ct. - -Optional properties of the LED child node: -- function : see Documentation/devicetree/bindings/leds/common.txt -- color : see Documentation/devicetree/bindings/leds/common.txt -- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated) - -Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with -a switch that allows for routing strobe signal either from the host or from -the camera sensor): - -#include "exynos4412.dtsi" -#include - -led-controller { - compatible = "skyworks,aat1290"; - flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; - enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default", "host", "isp"; - pinctrl-0 = <&camera_flash_host>; - pinctrl-1 = <&camera_flash_host>; - pinctrl-2 = <&camera_flash_isp>; - - camera_flash: led { - function = LED_FUNCTION_FLASH; - color = ; - led-max-microamp = <520833>; - flash-max-microamp = <1012500>; - flash-max-timeout-us = <1940000>; - }; -}; - -&pinctrl_0 { - camera_flash_host: camera-flash-host { - samsung,pins = "gpj1-0"; - samsung,pin-function = <1>; - samsung,pin-val = <0>; - }; - - camera_flash_isp: camera-flash-isp { - samsung,pins = "gpj1-0"; - samsung,pin-function = <1>; - samsung,pin-val = <1>; - }; -}; diff --git a/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml new file mode 100644 index 000000000000..919ee0e30b10 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/skyworks,aat1290.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs + +maintainers: + - Jacek Anaszewski + - Krzysztof Kozlowski + +description: | + The device is controlled through two pins:: FL_EN and EN_SET. The pins when, + asserted high, enable flash strobe and movie mode (max 1/2 of flash current) + respectively. In order to add a capability of selecting the strobe signal + source (e.g. CPU or camera sensor) there is an additional switch required, + independent of the flash chip. The switch is controlled with pin control. + +properties: + compatible: + const: skyworks,aat1290 + + enset-gpios: + maxItems: 1 + description: EN_SET pin + + flen-gpios: + maxItems: 1 + description: FL_EN pin + + led: + $ref: common.yaml# + unevaluatedProperties: false + + properties: + led-max-microamp: true + + flash-max-microamp: + description: | + Maximum flash LED supply current can be calculated using following + formula:: I = 1A * 162 kOhm / Rset. + + flash-max-timeout-us: + description: | + Maximum flash timeout can be calculated using following formula:: + T = 8.82 * 10^9 * Ct. + + required: + - flash-max-microamp + - flash-max-timeout-us + - led-max-microamp + + pinctrl-names: + items: + - const: default + - const: host + - const: isp + + pinctrl-0: true + pinctrl-1: true + pinctrl-2: true + +required: + - compatible + - enset-gpios + - flen-gpios + - led + +additionalProperties: false + +examples: + - | + #include + #include + + // Ct = 220 nF, Rset = 160 kOhm + led-controller { + compatible = "skyworks,aat1290"; + flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; + enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default", "host", "isp"; + pinctrl-0 = <&camera_flash_host>; + pinctrl-1 = <&camera_flash_host>; + pinctrl-2 = <&camera_flash_isp>; + + led { + label = "flash"; + function = LED_FUNCTION_FLASH; + color = ; + led-max-microamp = <520833>; + flash-max-microamp = <1012500>; + flash-max-timeout-us = <1940000>; + }; + };